From: "Andrew Burgess" <aburgess@broadcom.com>
To: "Pedro Alves" <palves@redhat.com>
Cc: gdb-patches@sourceware.org
Subject: Re: [PATCH] ada-lang.c:coerce_unspec_val_to_type: Preserve laziness.
Date: Fri, 05 Jul 2013 10:29:00 -0000 [thread overview]
Message-ID: <51D6A00A.2050803@broadcom.com> (raw)
In-Reply-To: <20130704182244.16683.55719.stgit@brno.lan>
On 04/07/2013 7:22 PM, Pedro Alves wrote:
> ada-lang.c:coerce_unspec_val_to_type does:
>
> if (value_lazy (val)
> || TYPE_LENGTH (type) > TYPE_LENGTH (value_type (val)))
> result = allocate_value_lazy (type);
> else
> {
> result = allocate_value (type);
> memcpy (value_contents_raw (result), value_contents (val),
> TYPE_LENGTH (type));
> }
> set_value_component_location (result, val);
> set_value_bitsize (result, value_bitsize (val));
> set_value_bitpos (result, value_bitpos (val));
> set_value_address (result, value_address (val));
> set_value_optimized_out (result, value_optimized_out (val));
>
> Notice that before value_optimized_out was made to auto-fetch lazy
> values, VAL would end up still lazy if it was lazy on entry. It's not
> really a problem here if VAL is lazy, and VAL->optimized_out is 0,
> because RESULT is also left lazy. IOW, this just wants to copy the
> VAL->optimized_out flag to RESULT->optimized_out, nothing else.
>
> The patch adds the value_optimized_out_const function for that.
As an alternative, this patch avoids the new _const function,
I move the setting of the optimized_out value into the else case where we know val is no longer lazy.
Cheers,
Andrew
diff --git a/gdb/ada-lang.c b/gdb/ada-lang.c
index 8240fee..ea7b579 100644
--- a/gdb/ada-lang.c
+++ b/gdb/ada-lang.c
@@ -576,12 +576,14 @@ coerce_unspec_val_to_type (struct value *val, struct type *type)
result = allocate_value (type);
memcpy (value_contents_raw (result), value_contents (val),
TYPE_LENGTH (type));
+ /* Only copy the optimized out setting if val is not lazy. If it
+ is lazy then the optimized_out flag will always be false. */
+ set_value_optimized_out (result, value_optimized_out (val));
}
set_value_component_location (result, val);
set_value_bitsize (result, value_bitsize (val));
set_value_bitpos (result, value_bitpos (val));
set_value_address (result, value_address (val));
- set_value_optimized_out (result, value_optimized_out (val));
return result;
}
}
>
> (I found this out by grepping for set_value_optimized_out and trying
> to convert the uses I found to instead allocate the value with
> allocate_optimized_out_value.)
>
> Tested on x86_64 Fedora 17.
>
> WDYT?
>
> gdb/
> 2013-07-04 Pedro Alves <palves@redhat.com>
>
> * ada-lang.c (coerce_unspec_val_to_type): Use
> value_optimized_out_const.
> * value.c (value_optimized_out_const): New function.
> * value.h (value_optimized_out_const): New declaration.
> ---
> gdb/ada-lang.c | 2 +-
> gdb/value.c | 6 ++++++
> gdb/value.h | 8 +++++++-
> 3 files changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/gdb/ada-lang.c b/gdb/ada-lang.c
> index 8240fee..dc5f2b6 100644
> --- a/gdb/ada-lang.c
> +++ b/gdb/ada-lang.c
> @@ -581,7 +581,7 @@ coerce_unspec_val_to_type (struct value *val, struct type *type)
> set_value_bitsize (result, value_bitsize (val));
> set_value_bitpos (result, value_bitpos (val));
> set_value_address (result, value_address (val));
> - set_value_optimized_out (result, value_optimized_out (val));
> + set_value_optimized_out (result, value_optimized_out_const (val));
> return result;
> }
> }
> diff --git a/gdb/value.c b/gdb/value.c
> index 353f62a..9e58199 100644
> --- a/gdb/value.c
> +++ b/gdb/value.c
> @@ -1062,6 +1062,12 @@ value_optimized_out (struct value *value)
> return value->optimized_out;
> }
>
> +int
> +value_optimized_out_const (const struct value *value)
> +{
> + return value->optimized_out;
> +}
> +
> void
> set_value_optimized_out (struct value *value, int val)
> {
> diff --git a/gdb/value.h b/gdb/value.h
> index 8a66aa4..8d669ec 100644
> --- a/gdb/value.h
> +++ b/gdb/value.h
> @@ -319,10 +319,16 @@ extern int value_fetch_lazy (struct value *val);
> extern int value_contents_equal (struct value *val1, struct value *val2);
>
> /* If nonzero, this is the value of a variable which does not actually
> - exist in the program. */
> + exist in the program, at least partially. If the value is lazy,
> + this may fetch it now. */
> extern int value_optimized_out (struct value *value);
> extern void set_value_optimized_out (struct value *value, int val);
>
> +/* Like value_optimized_out, but don't fetch the value even if it is
> + lazy. Mainly useful for constructing other values using VALUE as
> + template. */
> +extern int value_optimized_out_const (const struct value *value);
> +
> /* Like value_optimized_out, but return false if any bit in the object
> is valid. */
> extern int value_entirely_optimized_out (const struct value *value);
>
>
>
>
next prev parent reply other threads:[~2013-07-05 10:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-04 18:23 Pedro Alves
2013-07-05 10:29 ` Andrew Burgess [this message]
2013-07-05 10:41 ` Pedro Alves
2013-07-10 17:13 ` Tom Tromey
2013-07-26 17:08 ` Pedro Alves
2013-07-10 0:44 ` Joel Brobecker
2013-07-26 17:15 ` Pedro Alves
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51D6A00A.2050803@broadcom.com \
--to=aburgess@broadcom.com \
--cc=gdb-patches@sourceware.org \
--cc=palves@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox