2012-03-06 Yao Qi Pedro Alves PR server/13392 * linux-x86-low.c: Include inttypes.h. (amd64_install_fast_tracepoint_jump_pad): Check offset of JMP insn. * tracepoint.c (cmd_qtdp): Return an E. style error when a duplicate tracepoint is detected. 2012-03-06 Yao Qi Pedro Alves PR server/13392 * gdb.trace/change-loc.exp (tracepoint_change_loc_1): Remove kfail. Expect target errors related to fast tracepoints being too far from the jump pad. (tracepoint_change_loc_2): Likewise. * gdb.trace/pending.exp (pending_tracepoint_works): Likewise. (pending_tracepoint_resolved_during_trace): Likewise. (pending_tracepoint_installed_during_trace): Likewise. (pending_tracepoint_with_action_resolved): Likewise. diff --git c/gdb/gdbserver/linux-x86-low.c w/gdb/gdbserver/linux-x86-low.c index 58aaf9a..ed1f8a8 100644 --- c/gdb/gdbserver/linux-x86-low.c +++ w/gdb/gdbserver/linux-x86-low.c @@ -20,6 +20,7 @@ #include #include #include +#include #include "server.h" #include "linux-low.h" #include "i387-fp.h" @@ -1200,6 +1201,8 @@ amd64_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint, CORE_ADDR tpaddr, { unsigned char buf[40]; int i, offset; + int64_t loffset; + CORE_ADDR buildaddr = *jump_entry; /* Build the jump pad. */ @@ -1323,7 +1326,17 @@ amd64_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint, CORE_ADDR tpaddr, *adjusted_insn_addr_end = buildaddr; /* Finally, write a jump back to the program. */ - offset = (tpaddr + orig_size) - (buildaddr + sizeof (jump_insn)); + + loffset = (tpaddr + orig_size) - (buildaddr + sizeof (jump_insn)); + if (loffset > INT_MAX || loffset < INT_MIN) + { + sprintf (err, + "E.Jump back from jump pad too far from tracepoint " + "(offset 0x%" PRIx64 " > int32).", loffset); + return 1; + } + + offset = (int) loffset; memcpy (buf, jump_insn, sizeof (jump_insn)); memcpy (buf + 1, &offset, 4); append_insns (&buildaddr, sizeof (jump_insn), buf); @@ -1332,7 +1345,17 @@ amd64_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint, CORE_ADDR tpaddr, is always done last (by our caller actually), so that we can install fast tracepoints with threads running. This relies on the agent's atomic write support. */ - offset = *jump_entry - (tpaddr + sizeof (jump_insn)); + loffset = *jump_entry - (tpaddr + sizeof (jump_insn)); + if (loffset > INT_MAX || loffset < INT_MIN) + { + sprintf (err, + "E.Jump pad too far from tracepoint " + "(offset 0x%" PRIx64 " > int32).", loffset); + return 1; + } + + offset = (int) loffset; + memcpy (buf, jump_insn, sizeof (jump_insn)); memcpy (buf + 1, &offset, 4); memcpy (jjump_pad_insn, buf, sizeof (jump_insn)); diff --git c/gdb/gdbserver/tracepoint.c w/gdb/gdbserver/tracepoint.c index 21e58ff..3a10daf 100644 --- c/gdb/gdbserver/tracepoint.c +++ w/gdb/gdbserver/tracepoint.c @@ -2304,10 +2304,8 @@ cmd_qtdp (char *own_buf) /* Duplicate tracepoints are never allowed. */ if (tpoint) { - trace_debug ("Tracepoint error: tracepoint %d" - " at 0x%s already exists", + sprintf (own_buf, "E.Tracepoint %d at 0x%s already exists", (int) num, paddress (addr)); - write_enn (own_buf); return; } diff --git c/gdb/testsuite/gdb.trace/change-loc.exp w/gdb/testsuite/gdb.trace/change-loc.exp index d6062fc..a9bbbbc 100644 --- c/gdb/testsuite/gdb.trace/change-loc.exp +++ w/gdb/testsuite/gdb.trace/change-loc.exp @@ -98,7 +98,21 @@ proc tracepoint_change_loc_1 { trace_type } { with_test_prefix "1 $trace_type" { gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \ "continue to marker 1" # Set a tracepoint during tracing. - gdb_test "${trace_type} set_tracepoint" ".*" "set tracepoint on set_tracepoint" + set test "set tracepoint on set_tracepoint" + gdb_test_multiple "${trace_type} set_tracepoint" $test { + -re "Target returns error code .* too far .*$gdb_prompt $" { + if [string equal $trace_type "ftrace"] { + # The target was unable to install the fast tracepoint + # (e.g., jump pad too far from tracepoint). + pass "$test (too far)" + } else { + fail $test + } + } + -re "\r\n$gdb_prompt $" { + pass $test + } + } gdb_trace_setactions "set action for tracepoint" "" \ "collect \$$pcreg" "^$" @@ -109,14 +123,23 @@ proc tracepoint_change_loc_1 { trace_type } { with_test_prefix "1 $trace_type" { \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\.*4\.1.* in func4.*4\.2.* in func4.*" \ "tracepoint with two locations" - gdb_test_multiple "continue" "continue to marker 2" { + set test "continue to marker 2" + gdb_test_multiple "continue" $test { + -re "Target returns error code .*Tracepoint 4 at .* already exists.*$gdb_prompt $" { + if [string equal $trace_type "ftrace"] { + # Expected if the target was unable to install the + # fast tracepoint (e.g., jump pad too far from + # tracepoint) earlier. + pass "$test (tracepoint already exists)" + # Skip the rest of the tests. + return + } else { + fail $test + } + } -re ".*Breakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" { pass "continue to marker 2" } - -re ".*$gdb_prompt $" { - kfail "gdb/13392" "continue to marker 2" - return - } } # tracepoint has three locations after shlib change-loc-2 is loaded. gdb_test "info trace" \ @@ -198,19 +221,28 @@ proc tracepoint_change_loc_2 { trace_type } { with_test_prefix "2 $trace_type" { "breakpoint on marker" # tracepoint with two locations will be downloaded and installed. - gdb_test_no_output "tstart" - - gdb_test_multiple "continue" "continue to marker 1" { - -re ".*Breakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" { - pass "continue to marker 1" - } - -re ".*$gdb_prompt $" { - kfail "gdb/13392" "continue to marker 1" - return + set test "tstart" + gdb_test_multiple "tstart" $test { + -re "^tstart\r\n$gdb_prompt $" { + pass $test + } + -re "Target returns error code .* too far .*$gdb_prompt $" { + if [string equal $trace_type "ftrace"] { + # The target was unable to install the fast tracepoint + # (e.g., jump pad too far from tracepoint). + pass "$test (too far)" + # Skip the rest of the tests. + return + } else { + fail $test + } } } gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \ + "continue to marker 1" + + gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \ "continue to marker 2" # tracepoint has three locations after shlib change-loc-2 is loaded. diff --git c/gdb/testsuite/gdb.trace/pending.exp w/gdb/testsuite/gdb.trace/pending.exp index 017aea9..f2147cc 100644 --- c/gdb/testsuite/gdb.trace/pending.exp +++ w/gdb/testsuite/gdb.trace/pending.exp @@ -132,18 +132,27 @@ proc pending_tracepoint_works { trace_type } { with_test_prefix "$trace_type wor gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \ "breakpoint on marker" - gdb_test_no_output "tstart" "start trace experiment" - - gdb_test_multiple "continue" "continue to marker" { - -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" { - pass "continue to marker" - } - -re ".*$gdb_prompt $" { - kfail "gdb/13392" "continue to marker" - return + set test "start trace experiment" + gdb_test_multiple "tstart" $test { + -re "^tstart\r\n$gdb_prompt $" { + pass $test + } + -re "Target returns error code .* too far .*$gdb_prompt $" { + if [string equal $trace_type "ftrace"] { + # The target was unable to install the fast tracepoint + # (e.g., jump pad too far from tracepoint). + pass "$test (too far)" + # Skip the rest of the tests. + return + } else { + pass $test + } } } + gdb_test "continue" "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*" \ + "continue to marker" + gdb_test "tstop" "\[\r\n\]+" "stop trace experiment" gdb_test "tfind start" "#0 .*" "tfind test frame 0" @@ -189,13 +198,22 @@ proc pending_tracepoint_resolved_during_trace { trace_type } \ gdb_test "continue" "Continuing.\r\n\r\nBreakpoint.*marker.*at.*pending.c.*" \ "continue to marker 1" - gdb_test_multiple "continue" "continue to marker 2" { - -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" { - pass "continue to marker 2" + set test "continue to marker 2" + gdb_test_multiple "continue" $test { + -re "Target returns error code .*Tracepoint .* at .* already exists.*$gdb_prompt $" { + if [string equal $trace_type "ftrace"] { + # Expected if the target was unable to install the + # fast tracepoint (e.g., jump pad too far from + # tracepoint) earlier. + pass "$test (tracepoint already exists)" + # Skip the rest of the tests. + return + } else { + fail $test + } } - -re ".*$gdb_prompt $" { - kfail "gdb/13392" "continue to marker 2" - return + -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" { + pass $test } } @@ -253,14 +271,23 @@ proc pending_tracepoint_installed_during_trace { trace_type } \ \[0-9\]+\[\t \]+\(fast |\)tracepoint\[ \t\]+keep y.*PENDING.*set_point2.*" \ "single pending tracepoint on set_point2" - gdb_test_multiple "continue" "continue to marker 2" { + set test "continue to marker 2" + gdb_test_multiple "continue" $test { + -re "Target returns error code .*Tracepoint .* at .* already exists.*$gdb_prompt $" { + if [string equal $trace_type "ftrace"] { + # Expected if the target was unable to install the + # fast tracepoint (e.g., jump pad too far from + # tracepoint) earlier. + pass "$test (tracepoint already exists)" + # Skip the rest of the tests. + return + } else { + fail $test + } + } -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" { pass "continue to marker 2" } - -re ".*$gdb_prompt $" { - kfail "gdb/13392" "continue to marker 2" - return - } } gdb_test "tstop" "\[\r\n\]+" "stop trace experiment" @@ -423,13 +450,22 @@ proc pending_tracepoint_with_action_resolved { trace_type } \ gdb_test "continue" "Continuing.\r\n\r\nBreakpoint.*marker.*at.*pending.c.*" \ "continue to marker 1" - gdb_test_multiple "continue" "continue to marker 2" { - -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" { - pass "continue to marker 2" + set test "continue to marker 2" + gdb_test_multiple "continue" $test { + -re "Target returns error code .*Tracepoint .* at .* already exists.*$gdb_prompt $" { + if [string equal $trace_type "ftrace"] { + # Expected if the target was unable to install the + # fast tracepoint (e.g., jump pad too far from + # tracepoint) earlier. + pass "$test (tracepoint already exists)" + # Skip the rest of the tests. + return + } else { + fail $test + } } - -re ".*$gdb_prompt $" { - kfail "gdb/13392" "continue to marker 2" - return + -re "Continuing.\r\n\r\nBreakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" { + pass $test } }