From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <gdb-patches-return-79098-listarch-gdb-patches=sources.redhat.com@sourceware.org>
Received: (qmail 31729 invoked by alias); 3 Mar 2011 21:18:26 -0000
Received: (qmail 31720 invoked by uid 22791); 3 Mar 2011 21:18:22 -0000
X-SWARE-Spam-Status: No, hits=-5.1 required=5.0	tests=AWL,BAYES_00,RCVD_IN_DNSWL_HI,T_RP_MATCHES_RCVD
X-Spam-Check-By: sourceware.org
Received: from smtp-outbound-2.vmware.com (HELO smtp-outbound-2.vmware.com) (65.115.85.73)    by sourceware.org (qpsmtpd/0.43rc1) with ESMTP; Thu, 03 Mar 2011 21:18:13 +0000
Received: from mailhost2.vmware.com (mailhost2.vmware.com [10.16.67.167])	by smtp-outbound-2.vmware.com (Postfix) with ESMTP id 0EEA14F003;	Thu,  3 Mar 2011 13:18:11 -0800 (PST)
Received: from msnyder-server.eng.vmware.com (promd-2s-dhcp138.eng.vmware.com [10.20.124.138])	by mailhost2.vmware.com (Postfix) with ESMTP id ED9DC8EE91;	Thu,  3 Mar 2011 13:18:10 -0800 (PST)
Message-ID: <4D700592.8050406@vmware.com>
Date: Thu, 03 Mar 2011 21:18:00 -0000
From: Michael Snyder <msnyder@vmware.com>
User-Agent: Thunderbird 2.0.0.24 (X11/20101201)
MIME-Version: 1.0
To: Tom Tromey <tromey@redhat.com>
CC: "gdb-patches@sourceware.org" <gdb-patches@sourceware.org>
Subject: Re: RFC: change "program exited" message
References: <m3ei6ovsf3.fsf@fleche.redhat.com>
In-Reply-To: <m3ei6ovsf3.fsf@fleche.redhat.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
X-IsSubscribed: yes
Mailing-List: contact gdb-patches-help@sourceware.org; run by ezmlm
Precedence: bulk
List-Id: <gdb-patches.sourceware.org>
List-Subscribe: <mailto:gdb-patches-subscribe@sourceware.org>
List-Archive: <http://sourceware.org/ml/gdb-patches/>
List-Post: <mailto:gdb-patches@sourceware.org>
List-Help: <mailto:gdb-patches-help@sourceware.org>, <http://sourceware.org/ml/#faqs>
Sender: gdb-patches-owner@sourceware.org
X-SW-Source: 2011-03/txt/msg00211.txt.bz2

Tom Tromey wrote:
> I would appreciate comments on this patch.
> In the absence of comments I will check it in.
> 
> If you do multi-inferior debugging, you can wind up with output like
> (actual cut-and-paste):
> 
>     [New process 24959]
>     [New process 24960]
> 
>     Program exited with code 0177.
> 
>     Program exited with code 0177.
>     [New process 24961]
>     [New process 24962]
> 
>     Program exited normally.
> 
>     Program exited normally.
> 
> It is hard to see what is going on, because the PID is not reported in
> the exit message.
> 
> This patch changes GDB to print:
> 
>     [Inferior 25036 exited normally]

Can I suggest "Process 25036"?

> 
> Most of the work was updating the test suite and writing the ChangeLog.
> 
> Built and regtested on x86-64 (compile farm).
> 
> Tom
> 
> 2011-03-03  Tom Tromey  <tromey@redhat.com>
> 
>         * infrun.c (print_exited_reason): Include inferior PID in
>         message.
> 
> 2011-03-03  Tom Tromey  <tromey@redhat.com>
> 
>         * lib/opencl.exp (skip_opencl_tests): Update for exit message
>         change.
>         * lib/mi-support.exp (mi_gdb_test): Update for exit message
>         change.
>         * lib/gdb.exp (gdb_test_multiple): Update comment.  Update for
>         exit message change.
>         (skip_altivec_tests): Update for exit message change.
>         (skip_vsx_tests): Likewise.
>         (gdb_continue_to_end): Likewise.
>         (gdb_continue_off_end): New proc.
>         * lib/cell.exp (skip_cell_tests): Update for exit message change.
>         * gdb.threads/tls.exp: Update for exit message change.
>         * gdb.threads/thread-unwindonsignal.exp: Use
>         gdb_continue_off_end.
>         * gdb.threads/step.exp (step_it): Update for exit message change.
>         (continue_all): Likewise.
>         * gdb.threads/print-threads.exp (test_all_threads): Update for
>         exit message change.
>         * gdb.threads/interrupted-hand-call.exp: Use
>         gdb_continue_off_end.
>         * gdb.threads/execl.exp: Use gdb_continue_off_end.
>         * gdb.python/py-prettyprint.exp (run_lang_tests): Use
>         gdb_continue_off_end.
>         * gdb.hp/gdb.objdbg/objdbg02.exp: Use gdb_continue_off_end.
>         * gdb.hp/gdb.objdbg/objdbg01.exp: Use gdb_continue_off_end.
>         * gdb.hp/gdb.defects/solib-d.exp: Update for exit message change.
>         * gdb.cp/method.exp: Update for exit message change.
>         * gdb.cp/mb-templates.exp: Update for exit message change.
>         * gdb.cp/mb-inline.exp: Use gdb_continue_off_end.
>         * gdb.cp/annota3.exp: Update for exit message change.
>         * gdb.cp/annota2.exp: Update for exit message change.
>         * gdb.cell/fork.exp: Use gdb_continue_off_end.
>         * gdb.base/term.exp: Update for exit message change.
>         * gdb.base/step-test.exp (test_i): Update for exit message change.
>         * gdb.base/sigstep.exp (advance): Update for exit message change.
>         (advancei): Likewise.
>         * gdb.base/siginfo.exp: Update for exit message change.
>         * gdb.base/shlib-call.exp: Use gdb_continue_off_end.
>         * gdb.base/reread.exp: Use gdb_continue_off_end.
>         * gdb.base/langs.exp: Use gdb_continue_off_end.
>         * gdb.base/interrupt.exp: Update for exit message change.
>         * gdb.base/gdb1555.exp: Update for exit message change.
>         * gdb.base/exe-lock.exp: Use gdb_continue_off_end.
>         * gdb.base/ending-run.exp: Update for exit message change.
>         * gdb.base/chng-syms.exp: Update for exit message change.
>         * gdb.base/checkpoint.exp: Update for exit message change.
>         * gdb.base/catch-syscall.exp (check_for_program_end): Use
>         gdb_continue_off_end.
>         (test_catch_syscall_with_wrong_args): Likewise.
>         * gdb.base/call-signal-resume.exp: Use gdb_continue_off_end.
>         * gdb.base/break-interp.exp (test_ld): Update for exit message
>         change.
>         * gdb.base/bang.exp: Update for exit message change.
>         * gdb.base/attach.exp (do_attach_tests): Use gdb_continue_off_end.
>         (do_call_attach_tests): Likewise.
>         * gdb.base/a2-run.exp: Update for exit message change.
>         * gdb.arch/ppc-dfp.exp: Update for exit message change.
>         * gdb.ada/tasks.exp: Use gdb_continue_off_end.
>         * gdb.ada/catch_ex.exp: Use gdb_continue_off_end.
> 
> 
> diff --git a/gdb/infrun.c b/gdb/infrun.c
> index 274082d..09569af 100644
> --- a/gdb/infrun.c
> +++ b/gdb/infrun.c
> @@ -5488,22 +5488,28 @@ print_signal_exited_reason (enum target_signal siggnal)
>  static void
>  print_exited_reason (int exitstatus)
>  {
> +  struct inferior *inf = current_inferior ();
> +
>    annotate_exited (exitstatus);
>    if (exitstatus)
>      {
>        if (ui_out_is_mi_like_p (uiout))
>         ui_out_field_string (uiout, "reason",
>                              async_reason_lookup (EXEC_ASYNC_EXITED));
> -      ui_out_text (uiout, "\nProgram exited with code ");
> +      ui_out_text (uiout, "[Inferior ");
> +      ui_out_text (uiout, plongest (inf->pid));
> +      ui_out_text (uiout, " exited with code ");
>        ui_out_field_fmt (uiout, "exit-code", "0%o", (unsigned int) exitstatus);
> -      ui_out_text (uiout, ".\n");
> +      ui_out_text (uiout, "]\n");
>      }
>    else
>      {
>        if (ui_out_is_mi_like_p (uiout))
>         ui_out_field_string
>           (uiout, "reason", async_reason_lookup (EXEC_ASYNC_EXITED_NORMALLY));
> -      ui_out_text (uiout, "\nProgram exited normally.\n");
> +      ui_out_text (uiout, "[Inferior ");
> +      ui_out_text (uiout, plongest (inf->pid));
> +      ui_out_text (uiout, " exited normally]\n");
>      }
>    /* Support the --return-child-result option.  */
>    return_child_result_value = exitstatus;
> diff --git a/gdb/testsuite/gdb.ada/catch_ex.exp b/gdb/testsuite/gdb.ada/catch_ex.exp
> index b0a4000..d692aca 100644
> --- a/gdb/testsuite/gdb.ada/catch_ex.exp
> +++ b/gdb/testsuite/gdb.ada/catch_ex.exp
> @@ -141,8 +141,6 @@ gdb_test "continue" \
>           "Continuing\.$eol$catchpoint_msg$eol.*SPOT4" \
>           "continuing to unhandled exception"
> 
> -gdb_test "continue" \
> -         "Continuing\..*Program exited.*" \
> -         "continuing to program completion"
> +gdb_continue_off_end "continue" "continuing to program completion"
> 
> 
> diff --git a/gdb/testsuite/gdb.ada/tasks.exp b/gdb/testsuite/gdb.ada/tasks.exp
> index bced9f8..166f18c 100644
> --- a/gdb/testsuite/gdb.ada/tasks.exp
> +++ b/gdb/testsuite/gdb.ada/tasks.exp
> @@ -70,7 +70,5 @@ gdb_test "info tasks" \
>  # Now, resume the execution and make sure that GDB does not stop when
>  # task 4 hits the breakpoint. Continuing thus results in our program
>  # running to completion.
> -gdb_test "continue" \
> -         ".*Program exited normally\..*" \
> -         "continue until end of program"
> +gdb_continue_off_end "continue" "continue until end of program"
> 
> diff --git a/gdb/testsuite/gdb.arch/ppc-dfp.exp b/gdb/testsuite/gdb.arch/ppc-dfp.exp
> index 10fbd3c..3a57b10 100644
> --- a/gdb/testsuite/gdb.arch/ppc-dfp.exp
> +++ b/gdb/testsuite/gdb.arch/ppc-dfp.exp
> @@ -59,7 +59,7 @@ gdb_run_cmd
>  # When the prompt comes back we'll be at the Set DFP rounding mode breakpoint.
>  # Unless the program bails out after checking AT_HWCAP.
>  gdb_expect {
> -  -re "Program exited with code 01.\[\r\n\]+$gdb_prompt $" {
> +  -re "Inferior \[0-9\]+ exited with code 01.\[\r\n\]+$gdb_prompt $" {
>      unsupported "This machine doesn't support Decimal Floating Point."
>      return -1
>    }
> diff --git a/gdb/testsuite/gdb.base/a2-run.exp b/gdb/testsuite/gdb.base/a2-run.exp
> index d26a202..fbbf7a4 100644
> --- a/gdb/testsuite/gdb.base/a2-run.exp
> +++ b/gdb/testsuite/gdb.base/a2-run.exp
> @@ -42,7 +42,7 @@ if [istarget "*-*-vxworks*"] then {
>      set timeout 120
>      verbose "Timeout is now $timeout seconds" 2
>      gdb_expect {
> -        "Program exited normally" {
> +        "Inferior \[0-9\]+ exited normally" {
>             unresolved "run \"$testfile\" with no args"
>         }
>          -re "usage:  factorial <number>" {
> @@ -57,19 +57,19 @@ if [istarget "*-*-vxworks*"] then {
>      gdb_expect -re "$gdb_prompt $" {}
>  } else {
>      gdb_expect {
> -       -re ".*usage:  factorial <number>.*Program exited with code 01\.\r\n$gdb_prompt $" {
> +       -re ".*usage:  factorial <number>.*Inferior \[0-9\]+ exited with code 01.\r\n$gdb_prompt $" {
>             pass "run \"$testfile\" with no args"
>             pass "no spurious messages at program exit"
>         }
> -       -re ".*usage:  factorial <number>.*Program exited with code 01.*$gdb_prompt $" {
> +       -re ".*usage:  factorial <number>.*Inferior \[0-9\]+ exited with code 01.*$gdb_prompt $" {
>             pass "run \"$testfile\" with no args"
>             fail "no spurious messages at program exit"
>         }
> -       -re ".*usage:  factorial <number>.* EXIT code 1.*Program exited normally\.\r\n$gdb_prompt $" {
> +       -re ".*usage:  factorial <number>.* EXIT code 1.*Inferior \[0-9\]+ exited normally.\r\n$gdb_prompt $" {
>             pass "run \"$testfile\" with no args (exit wrapper)"
>             pass "no spurious messages at program exit"
>         }
> -       -re ".*usage:  factorial <number>.* EXIT code 1.*Program exited normally.*$gdb_prompt $" {
> +       -re ".*usage:  factorial <number>.* EXIT code 1.*Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>             pass "run \"$testfile\" with no args (exit wrapper)"
>             fail "no spurious messages at program exit"
>         }
> @@ -97,7 +97,7 @@ if [istarget "*-*-vxworks*"] then {
>      set timeout 120
>      verbose "Timeout is now $timeout seconds" 2
>      gdb_expect {
> -        "Program exited normally" {
> +        "Inferior \[0-9\]+ exited normally" {
>             unresolved "run \"$testfile\" with arg"
>         }
>          "120" {
> @@ -129,7 +129,7 @@ if [istarget "*-*-vxworks*"] then {
>      set timeout 120
>      verbose "Timeout is now $timeout seconds" 2
>      gdb_expect {
> -        "Program exited normally" {
> +        "Inferior \[0-9\]+ exited normally" {
>             unresolved "run \"$testfile\" again with same args"
>         }
>          "120" { pass "run \"$testfile\" again with same args" }
> @@ -161,7 +161,7 @@ if [istarget "*-*-vxworks*"] then {
>      set timeout 120
>      verbose "Timeout is now $timeout seconds" 2
>      gdb_expect {
> -        "Program exited normally" {
> +        "Inferior \[0-9\]+ exited normally" {
>             unresolved "run after setting args to nil"
>         }
>          "usage:  factorial <number>" {
> @@ -202,7 +202,7 @@ if [istarget "*-*-vxworks*"] then {
>      set timeout 120
>      verbose "Timeout is now $timeout seconds" 2
>      gdb_expect {
> -        "Program exited normally" {
> +        "Inferior \[0-9\]+ exited normally" {
>             unresolved "run \"$testfile\" again after setting args"
>         }
>          "720" {
> diff --git a/gdb/testsuite/gdb.base/attach.exp b/gdb/testsuite/gdb.base/attach.exp
> index 78df003..10656c0 100644
> --- a/gdb/testsuite/gdb.base/attach.exp
> +++ b/gdb/testsuite/gdb.base/attach.exp
> @@ -258,7 +258,7 @@ proc do_attach_tests {} {
> 
>      # Allow the test process to exit, to cleanup after ourselves.
> 
> -    gdb_test "continue" "Program exited normally." "after attach2, exit"
> +    gdb_continue_off_end "continue" "after attach2, exit"
> 
>      # Make sure we don't leave a process around to confuse
>      # the next test run (and prevent the compile by keeping
> @@ -365,7 +365,7 @@ proc do_call_attach_tests {} {
>      # Get rid of the process
> 
>      gdb_test "p should_exit = 1"
> -    gdb_test "c" "Program exited normally."
> +    gdb_continue_off_end
> 
>      # Be paranoid
> 
> diff --git a/gdb/testsuite/gdb.base/bang.exp b/gdb/testsuite/gdb.base/bang.exp
> index efe2295..cf953a1 100644
> --- a/gdb/testsuite/gdb.base/bang.exp
> +++ b/gdb/testsuite/gdb.base/bang.exp
> @@ -39,7 +39,7 @@ gdb_load ${binfile}
> 
>  gdb_run_cmd
>  gdb_expect {
> -    -re ".*Program exited normally.*$gdb_prompt $" {
> +    -re ".*Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>          pass "run program"
>      }
>      timeout {
> diff --git a/gdb/testsuite/gdb.base/break-interp.exp b/gdb/testsuite/gdb.base/break-interp.exp
> index 3df4dcb..fd1a768 100644
> --- a/gdb/testsuite/gdb.base/break-interp.exp
> +++ b/gdb/testsuite/gdb.base/break-interp.exp
> @@ -494,7 +494,7 @@ proc test_ld {file ifmain trynosym displacement} {
>                 }
>                 exp_continue
>             }
> -           -re "Program exited (normally|with code \[0-9\]+)\\.\r\n$gdb_prompt $" {
> +           -re "Inferior \[0-9\]+ exited (normally|with code \[0-9\]+).\r\n$gdb_prompt $" {
>                 # Do not check the binary filename as it may be truncated.
>                 pass $test
>             }
> diff --git a/gdb/testsuite/gdb.base/call-signal-resume.exp b/gdb/testsuite/gdb.base/call-signal-resume.exp
> index b85691c..c9b2176 100644
> --- a/gdb/testsuite/gdb.base/call-signal-resume.exp
> +++ b/gdb/testsuite/gdb.base/call-signal-resume.exp
> @@ -146,7 +146,6 @@ gdb_test "continue" "Breakpoint \[0-9\]*, handle_signal.*" \
> 
>  # Continue one last time, the program should exit normally.
> 
> -gdb_test "continue" "Program exited normally." \
> -    "continue to program exit"
> +gdb_continue_off_end
> 
>  return 0
> diff --git a/gdb/testsuite/gdb.base/catch-syscall.exp b/gdb/testsuite/gdb.base/catch-syscall.exp
> index d25df17..a8a5d54 100644
> --- a/gdb/testsuite/gdb.base/catch-syscall.exp
> +++ b/gdb/testsuite/gdb.base/catch-syscall.exp
> @@ -167,7 +167,7 @@ proc check_for_program_end {} {
>      delete_breakpoints
> 
>      set thistest "successful program end"
> -    gdb_test "continue" "Program exited normally.*" $thistest
> +    gdb_continue_off_end continue $thistest
> 
>  }
> 
> @@ -231,7 +231,7 @@ proc test_catch_syscall_with_wrong_args {} {
>      # If it doesn't, everything is right (since we don't have
>      # a syscall named "mlock" in it).  Otherwise, this is a failure.
>      set thistest "catch syscall with unused syscall ($syscall_name)"
> -    gdb_test "continue" "Program exited normally.*" $thistest
> +    gdb_continue_off_end "continue" $thistest
>  }
> 
>  proc test_catch_syscall_restarting_inferior {} {
> diff --git a/gdb/testsuite/gdb.base/checkpoint.exp b/gdb/testsuite/gdb.base/checkpoint.exp
> index f34b0d1..6f15fa9 100644
> --- a/gdb/testsuite/gdb.base/checkpoint.exp
> +++ b/gdb/testsuite/gdb.base/checkpoint.exp
> @@ -277,23 +277,23 @@ gdb_test "print ftell (out) > 100000" " = 1.*" "outfile still open 10"
> 
>  delete_breakpoints
>  gdb_test "continue" \
> -    "Deleting copy.*Program exited normally.*Switching to.*" \
> +    "Deleting copy.*Inferior \[0-9\]+ exited normally.*Switching to.*" \
>      "Exit, dropped into next fork one"
> 
>  gdb_test "continue" \
> -    "Deleting copy.*Program exited normally.*Switching to.*" \
> +    "Deleting copy.*Inferior \[0-9\]+ exited normally.*Switching to.*" \
>      "Exit, dropped into next fork two"
> 
>  gdb_test "continue" \
> -    "Deleting copy.*Program exited normally.*Switching to.*" \
> +    "Deleting copy.*Inferior \[0-9\]+ exited normally.*Switching to.*" \
>      "Exit, dropped into next fork three"
> 
>  gdb_test "continue" \
> -    "Deleting copy.*Program exited normally.*Switching to.*" \
> +    "Deleting copy.*Inferior \[0-9\]+ exited normally.*Switching to.*" \
>      "Exit, dropped into next fork four"
> 
>  gdb_test "continue" \
> -    "Deleting copy.*Program exited normally.*Switching to.*" \
> +    "Deleting copy.*Inferior \[0-9\]+ exited normally.*Switching to.*" \
>      "Exit, dropped into next fork five"
> 
>  #
> diff --git a/gdb/testsuite/gdb.base/chng-syms.exp b/gdb/testsuite/gdb.base/chng-syms.exp
> index d2567e7..aca075e 100644
> --- a/gdb/testsuite/gdb.base/chng-syms.exp
> +++ b/gdb/testsuite/gdb.base/chng-syms.exp
> @@ -100,7 +100,7 @@ if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {deb
> 
>      gdb_run_cmd
>      gdb_expect {
> -       -re ".*Program exited normally.*$gdb_prompt $" {
> +       -re ".*Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>             pass "running with invalidated bpt condition after executable changes"
>         }
>         -re ".*Breakpoint .*,( 0x.* in)? (\[^ \]*)exit .*$gdb_prompt $" {
> diff --git a/gdb/testsuite/gdb.base/ending-run.exp b/gdb/testsuite/gdb.base/ending-run.exp
> index 43c46f8..782c206 100644
> --- a/gdb/testsuite/gdb.base/ending-run.exp
> +++ b/gdb/testsuite/gdb.base/ending-run.exp
> @@ -146,7 +146,7 @@ gdb_test_multiple "next" "step out of main" {
>         # This is what happens on mingw32ce.
>         pass "step out of main"
>      }
> -    -re ".*Program exited normally.*$gdb_prompt $" {
> +    -re ".*Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>         # This is what happens on Linux i86 (and I would expect others)
>         set program_exited 1
>         pass "step out of main"
> @@ -209,21 +209,21 @@ if {! [target_info exists use_gdb_stub]
>      global program_exited;
>      if {[eval expr $program_exited == 0]} {
>         gdb_test_multiple "n" "step to end of run" {
> -           -re "Program exited normally.*$gdb_prompt $" {
> +           -re "Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>                 # If we actually have debug info for the start function,
>                 # then we won't get the "Single-stepping until function
>                 # exit" message.
>                 pass "step to end of run"
>                 set program_exited_normally 1
>             }
> -           -re "Single.*EXIT code 0\r\n.*Program exited normally.*$gdb_prompt $" {
> +           -re "Single.*EXIT code 0\r\n.*Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>                 pass "step to end of run (status wrapper)"
>                 set program_exited_normally 1
>             }
>             -re "Single.*EXIT code 0\r\n.*$gdb_prompt $" {
>                 pass "step to end of run (status wrapper)"
>             }
> -           -re ".*Single.*Program exited.*$gdb_prompt $" {
> +           -re ".*Single.*Inferior \[0-9\]+ exited.*$gdb_prompt $" {
>                 pass "step to end of run"
>                 set program_exited_normally 1
>             }
> diff --git a/gdb/testsuite/gdb.base/exe-lock.exp b/gdb/testsuite/gdb.base/exe-lock.exp
> index e4bbbbe..011b9d2 100644
> --- a/gdb/testsuite/gdb.base/exe-lock.exp
> +++ b/gdb/testsuite/gdb.base/exe-lock.exp
> @@ -50,9 +50,7 @@ if ![runto_main] then {
>      continue
>  }
> 
> -gdb_test "continue" \
> -         ".*Program exited normally\\." \
> -         "continue until program exits"
> +gdb_continue_off_end
> 
>  # Try deleting the executable file, now that the program has exited,
>  # and make sure that the deletion worked by verifying that the exe
> diff --git a/gdb/testsuite/gdb.base/gdb1555.exp b/gdb/testsuite/gdb.base/gdb1555.exp
> index 8c3e8ba..21891f8 100644
> --- a/gdb/testsuite/gdb.base/gdb1555.exp
> +++ b/gdb/testsuite/gdb.base/gdb1555.exp
> @@ -77,7 +77,7 @@ gdb_test_multiple "n" $name \
>      -re "\[0-9\]+.*return a;.*$gdb_prompt $" {
>         pass $name
>      }
> -    -re "Single stepping until exit from function .*, \r\nwhich has no line number information.\r\n\r\nProgram exited normally.*$gdb_prompt $" {
> +    -re "Single stepping until exit from function .*, \r\nwhich has no line number information.\r\n\r\nInferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>         kfail "gdb/1555" $name
>      }
>  }
> diff --git a/gdb/testsuite/gdb.base/interrupt.exp b/gdb/testsuite/gdb.base/interrupt.exp
> index cce7fca..aabc316 100644
> --- a/gdb/testsuite/gdb.base/interrupt.exp
> +++ b/gdb/testsuite/gdb.base/interrupt.exp
> @@ -201,7 +201,7 @@ if ![file exists $binfile] then {
> 
>         send_gdb "\004"
>         gdb_expect {
> -           -re "end of file.*Program exited normally.*$gdb_prompt $" {
> +           -re "end of file.*Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>                 pass "send end of file"
>             }
>             -re "$gdb_prompt $" { fail "send end of file" }
> diff --git a/gdb/testsuite/gdb.base/langs.exp b/gdb/testsuite/gdb.base/langs.exp
> index a42f2d8..e3c3847 100644
> --- a/gdb/testsuite/gdb.base/langs.exp
> +++ b/gdb/testsuite/gdb.base/langs.exp
> @@ -146,8 +146,7 @@ if [runto csub] then {
>         gdb_breakpoint "exit"
>         gdb_test "cont" "Breakpoint .*exit.*" "continue to exit in langs.exp"
>      } else {
> -       gdb_test "cont" "Program exited normally\\..*" \
> -               "continue to exit in langs.exp"
> +       gdb_continue_off_end
>      }
>  }
> 
> diff --git a/gdb/testsuite/gdb.base/reread.exp b/gdb/testsuite/gdb.base/reread.exp
> index e562285..8f499e7 100644
> --- a/gdb/testsuite/gdb.base/reread.exp
> +++ b/gdb/testsuite/gdb.base/reread.exp
> @@ -149,8 +149,7 @@ if [is_remote target] {
> 
>      # This time, let the program run to completion.  If GDB checks the
>      # executable file's timestamp now, it won't notice any change.
> -    gdb_test "continue" ".*Program exited.*" \
> -            "second pass: continue to completion"
> +    gdb_continue_off_end "continue" "second pass: continue to completion"
> 
>      # Now move the newer executable into place, and re-run.  GDB
>      # should still notice that the executable file has changed,
> diff --git a/gdb/testsuite/gdb.base/shlib-call.exp b/gdb/testsuite/gdb.base/shlib-call.exp
> index f8601c7..230942d 100644
> --- a/gdb/testsuite/gdb.base/shlib-call.exp
> +++ b/gdb/testsuite/gdb.base/shlib-call.exp
> @@ -182,12 +182,12 @@ if ![is_remote target] {
>    gdb_test "run" "Starting program:.*Breakpoint .,.*" \
>         "run to bp in shared library"
> 
> -  gdb_test "cont" ".*Program exited normally..*"
> +  gdb_continue_off_end
> 
>    gdb_test "run" "Starting program:.*Breakpoint .,.*" \
>         "re-run to bp in shared library (PR's 16495, 18213)"
> 
> -  gdb_test "cont" ".*Program exited normally..*"
> +  gdb_continue_off_end
>  }
> 
>  return 0
> diff --git a/gdb/testsuite/gdb.base/siginfo.exp b/gdb/testsuite/gdb.base/siginfo.exp
> index db9fd5c..8b4a233 100644
> --- a/gdb/testsuite/gdb.base/siginfo.exp
> +++ b/gdb/testsuite/gdb.base/siginfo.exp
> @@ -83,7 +83,7 @@ gdb_test_multiple "step" "${test}" {
>         send_gdb "step\n"
>         exp_continue
>      }
> -    -re "Program exited normally.*${gdb_prompt} $" {
> +    -re "Inferior \[0-9\]+ exited normally.*${gdb_prompt} $" {
>         kfail gdb/1613 "$test (program exited)"
>      }
>      -re "(while ..done|return 0).*${gdb_prompt} $" {
> diff --git a/gdb/testsuite/gdb.base/sigstep.exp b/gdb/testsuite/gdb.base/sigstep.exp
> index 98e0e3d..ae33330 100644
> --- a/gdb/testsuite/gdb.base/sigstep.exp
> +++ b/gdb/testsuite/gdb.base/sigstep.exp
> @@ -88,7 +88,7 @@ proc advance { i } {
>             send_gdb "$i\n"
>             exp_continue -continue_timer
>         }
> -       -re "Program exited normally.*${gdb_prompt} $" {
> +       -re "Inferior \[0-9\]+ exited normally.*${gdb_prompt} $" {
>             setup_kfail gdb/1639 powerpc-*-*bsd*
>             fail "$test (program exited)"
>         }
> @@ -144,7 +144,7 @@ proc advancei { i } {
>         -re "main .*${gdb_prompt} $" {
>             fail "$test (in main)"
>         }
> -       -re "Program exited normally.*${gdb_prompt} $" {
> +       -re "Inferior \[0-9\]+ exited normally.*${gdb_prompt} $" {
>             fail "$test (program exited)"
>             set program_exited 1
>         }
> @@ -170,7 +170,7 @@ proc advancei { i } {
>             send_gdb "y\n"
>             exp_continue -continue_timer
>         }
> -       -re "Program exited normally.*${gdb_prompt} $" {
> +       -re "Inferior \[0-9\]+ exited normally.*${gdb_prompt} $" {
>             kfail gdb/1639 "$test (program exited)"
>             set program_exited 1
>         }
> diff --git a/gdb/testsuite/gdb.base/step-test.exp b/gdb/testsuite/gdb.base/step-test.exp
> index 1c48812..6432e51 100644
> --- a/gdb/testsuite/gdb.base/step-test.exp
> +++ b/gdb/testsuite/gdb.base/step-test.exp
> @@ -150,7 +150,7 @@ gdb_test_multiple "finish" "$test" {
>      -re ".*${decimal}.*callee.*NEXTI.*$gdb_prompt $" {
>         pass "$test"
>      }
> -    -re ".*(Program received|Program exited).*$gdb_prompt $" {
> +    -re ".*(Program received|Inferior exited).*$gdb_prompt $" {
>         # Oops... We ran to the end of the program...  Better reset
>         if {![runto_main]} then {
>             fail "$test (Can't run to main)"
> diff --git a/gdb/testsuite/gdb.base/term.exp b/gdb/testsuite/gdb.base/term.exp
> index 049a88b..aca1f58 100644
> --- a/gdb/testsuite/gdb.base/term.exp
> +++ b/gdb/testsuite/gdb.base/term.exp
> @@ -47,7 +47,7 @@ gdb_test_no_output "set width 0"
>  gdb_test "info terminal" "No saved terminal information.*" "test info terminal"
>  gdb_run_cmd 5
>  gdb_expect {
> -    -re ".*120.*Program exited normally.*$gdb_prompt $" {
> +    -re ".*120.*Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>         gdb_test "info terminal" "No saved terminal information.*" "test info terminal #2"
>      }
>      default {
> diff --git a/gdb/testsuite/gdb.cell/fork.exp b/gdb/testsuite/gdb.cell/fork.exp
> index 3fdfc25..b3d40d5 100644
> --- a/gdb/testsuite/gdb.cell/fork.exp
> +++ b/gdb/testsuite/gdb.cell/fork.exp
> @@ -77,8 +77,7 @@ gdb_test_no_output "delete \$bpnum" "delete watchpoint"
>  gdb_test "continue" "Continuing\\..*Breakpoint \[0-9\]+, func \\(\\) at .*$spu_file.c:.*" \
>          "run until breakpoint hit"
> 
> -gdb_test "continue" "Continuing\\..*Program exited normally.*" \
> -        "run until end"
> +gdb_continue_off_end
> 
>  gdb_exit
> 
> diff --git a/gdb/testsuite/gdb.cp/annota2.exp b/gdb/testsuite/gdb.cp/annota2.exp
> index a48e2ea..390ff35 100644
> --- a/gdb/testsuite/gdb.cp/annota2.exp
> +++ b/gdb/testsuite/gdb.cp/annota2.exp
> @@ -116,7 +116,7 @@ gdb_test_multiple "print a" "print class" {
>  # `a.x is 1' is asynchronous regarding to `frames-invalid'.
>  #
>  gdb_test_multiple "continue" "continue until exit" {
> -    -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)*\r\na.x is 1\r\n\(\r\n\032\032frames-invalid\r\n\)*\r\n\032\032exited 0\r\n\r\nProgram exited normally.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
> +    -re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)*\r\na.x is 1\r\n\(\r\n\032\032frames-invalid\r\n\)*\r\n\032\032exited 0\r\n.Inferior \[0-9\]+ exited normally.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
>         pass "continue until exit"
>      }
>  }
> diff --git a/gdb/testsuite/gdb.cp/annota3.exp b/gdb/testsuite/gdb.cp/annota3.exp
> index 17021fb..2744d17 100644
> --- a/gdb/testsuite/gdb.cp/annota3.exp
> +++ b/gdb/testsuite/gdb.cp/annota3.exp
> @@ -122,8 +122,7 @@ gdb_expect_list "continue to exit" "$gdb_prompt$" {
>      "\r\n\032\032starting\r\n"
>      "a.x is 1\r\n"
>      "\r\n\032\032exited 0\r\n"
> -    "\r\n"
> -    "Program exited normally.\r\n"
> +    ".Inferior \[0-9\]+ exited normally.\r\n"
>      "\r\n\032\032stopped\r\n"
>  }
> 
> diff --git a/gdb/testsuite/gdb.cp/mb-inline.exp b/gdb/testsuite/gdb.cp/mb-inline.exp
> index 46d7cc2..bd8ea63 100644
> --- a/gdb/testsuite/gdb.cp/mb-inline.exp
> +++ b/gdb/testsuite/gdb.cp/mb-inline.exp
> @@ -101,9 +101,7 @@ gdb_expect {
>      }
>  }
> 
> -gdb_test "continue" \
> -    ".*Program exited normally.*" \
> -    "continue with disabled breakpoint 1.2"
> +gdb_continue_off_end "continue" "continue with disabled breakpoint 1.2"
> 
>  # Make sure we can set a breakpoint on a source statement that spans
>  # multiple lines.
> diff --git a/gdb/testsuite/gdb.cp/mb-templates.exp b/gdb/testsuite/gdb.cp/mb-templates.exp
> index 2f8f091..779918e 100644
> --- a/gdb/testsuite/gdb.cp/mb-templates.exp
> +++ b/gdb/testsuite/gdb.cp/mb-templates.exp
> @@ -129,7 +129,7 @@ gdb_test_no_output "disable 1" "disable breakpoint: disable"
> 
>  gdb_run_cmd
>  gdb_expect {
> -    -re "Program exited normally.*$gdb_prompt $" {
> +    -re "Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>         pass "disable breakpoint: run to breakpoint"
>      }
>      -re "$gdb_prompt $" {
> diff --git a/gdb/testsuite/gdb.cp/method.exp b/gdb/testsuite/gdb.cp/method.exp
> index 848a06d..ec000c7 100644
> --- a/gdb/testsuite/gdb.cp/method.exp
> +++ b/gdb/testsuite/gdb.cp/method.exp
> @@ -175,10 +175,10 @@ gdb_test_multiple "ptype A" "ptype A" {
>  }
> 
>  gdb_test_multiple "cont" "finish program" {
> -    -re "Continuing.\r\n\r\nProgram exited normally.*$gdb_prompt $" {
> +    -re "Continuing.\r\nInferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>         pass "finish program"
>      }
> -    -re "Continuing.* EXIT code 0.*Program exited normally.*$gdb_prompt $" {
> +    -re "Continuing.* EXIT code 0.*Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>         pass "finish program (exit wrapper)"
>      }
>  }
> diff --git a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp b/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp
> index 497f7de..6be6d44 100644
> --- a/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp
> +++ b/gdb/testsuite/gdb.hp/gdb.defects/solib-d.exp
> @@ -132,7 +132,7 @@ gdb_expect {
>      -re ".*solib-d1.*$gdb_prompt $" {
>          pass "Catch implicit load at startup"
>      }
> -    -re "Program exited.*$gdb_prompt $" {
> +    -re "Inferior \[0-9\]+ exited.*$gdb_prompt $" {
>          fail "CLLbs14756 || CLLbs16090 came back ???"
>      }
>      timeout { fail "(timeout) implicit library load" }
> @@ -228,7 +228,7 @@ gdb_expect {
>      -re "Stopped due to shared library event.*$gdb_prompt $" {
>          pass "stop for shlib event"
>      }
> -    -re "Program exited.*$gdb_prompt $" {
> +    -re "Inferior \[0-9\]+ exited.*$gdb_prompt $" {
>          fail "Bug CLLbs16090 came back ?"
>      }
>      timeout { fail "(timeout) stop for shlib event " }
> diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp
> index f743825..566ae26 100644
> --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp
> +++ b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg01.exp
> @@ -130,10 +130,10 @@ for {set filenum 0} {$filenum < 2} {incr filenum 1} {
>          gdb_test "s 1" ".*25.*"
>          if [istarget "hppa64-*-*"] {
>              gdb_test "s 1" "0x\[0-9a-f\]+ in .*"
> -            gdb_test "c" ".*Program exited normally.*"
> +           gdb_continue_off_end
>          } else {
>              gdb_test "s 1" "0x\[0-9a-f\]+ in _start .*"
> -            gdb_test "s 1" ".*Program exited normally.*"
> +            gdb_continue_off_end "s 1"
>          }
>      }
> 
> diff --git a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp
> index c336498..4c197f5 100644
> --- a/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp
> +++ b/gdb/testsuite/gdb.hp/gdb.objdbg/objdbg02.exp
> @@ -78,9 +78,9 @@ gdb_test "s 1" "main .*/x1.cc:15.*"
>  gdb_test "s 1" ".*16.*"
>  if [istarget "hppa64-*-*"] {
>      gdb_test "s 1" "0x\[0-9a-f\]+ in .*START.*"
> -    gdb_test "c" ".*Program exited normally.*"
> +    gdb_continue_off_end
>  } else {
>      gdb_test "s 1" "0x\[0-9a-f\]+ in _start .*"
> -    gdb_test "s 1" ".*Program exited normally.*"
> +    gdb_continue_off_end "s 1"
>  }
> 
> diff --git a/gdb/testsuite/gdb.python/py-prettyprint.exp b/gdb/testsuite/gdb.python/py-prettyprint.exp
> index 81de5a2..89c8791 100644
> --- a/gdb/testsuite/gdb.python/py-prettyprint.exp
> +++ b/gdb/testsuite/gdb.python/py-prettyprint.exp
> @@ -105,7 +105,7 @@ proc run_lang_tests {lang} {
>      gdb_test "print nstype" " = {.0. = 7, .1. = 42}" \
>         "print nstype on one line"
> 
> -    gdb_test "continue" "Program exited normally\."
> +    gdb_continue_off_end
> 
>      remote_file host delete ${remote_python_file}
>  }
> diff --git a/gdb/testsuite/gdb.threads/execl.exp b/gdb/testsuite/gdb.threads/execl.exp
> index 863c7cf..c2322ac 100644
> --- a/gdb/testsuite/gdb.threads/execl.exp
> +++ b/gdb/testsuite/gdb.threads/execl.exp
> @@ -71,5 +71,4 @@ gdb_test_multiple "info threads" "$test" {
>      }
>  }
> 
> -gdb_test "continue" ".*Program exited normally\\." \
> -    "continue to end"
> +gdb_continue_off_end
> diff --git a/gdb/testsuite/gdb.threads/interrupted-hand-call.exp b/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
> index cb0bc3d..e41326b 100644
> --- a/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
> +++ b/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
> @@ -86,7 +86,6 @@ gdb_test_multiple "maint print dummy-frames" "dummy frame popped" {
> 
>  # Continue one last time, the program should exit normally.
> 
> -gdb_test "continue" "Program exited normally." \
> -    "continue to program exit"
> +gdb_continue_off_end
> 
>  return 0
> diff --git a/gdb/testsuite/gdb.threads/print-threads.exp b/gdb/testsuite/gdb.threads/print-threads.exp
> index d221fbd..c715cc7 100644
> --- a/gdb/testsuite/gdb.threads/print-threads.exp
> +++ b/gdb/testsuite/gdb.threads/print-threads.exp
> @@ -80,7 +80,7 @@ proc test_all_threads { name kill } {
>             send_gdb "continue\n"
>             exp_continue
>         }
> -       -re "Program exited normally\\.\[\r\n\]+$gdb_prompt" {
> +       -re "Inferior \[0-9\]+ exited normally.\[\r\n\]+$gdb_prompt" {
>             pass "program exited normally"
>             if {$i == 5} {
>                 pass "all threads ran once ($name)"
> diff --git a/gdb/testsuite/gdb.threads/step.exp b/gdb/testsuite/gdb.threads/step.exp
> index c051196..20a4def 100644
> --- a/gdb/testsuite/gdb.threads/step.exp
> +++ b/gdb/testsuite/gdb.threads/step.exp
> @@ -62,7 +62,7 @@ proc step_it { cmd } {
>      gdb_expect {
>         -re "0x\[0-9A-Fa-f\]* *in.*\r\n$gdb_prompt $" { pass "step_it"; return 0 }
>         -re "0x\[0-9A-Fa-f\]* *\[0-9\]*.*\r\n$gdb_prompt $" { pass "step_it"; return 1 }
> -       -re "Program exited .*\n$gdb_prompt $" {
> +       -re "Inferior \[0-9\]+ exited .*\n$gdb_prompt $" {
>                 set program_exited 1
>                 return -1
>             }
> @@ -88,7 +88,7 @@ proc continue_all {} {
>             pass "continue_all"
>             return 0
>         }
> -       -re "Program exited .*\n$gdb_prompt $" {
> +       -re "Inferior \[0-9\]+ exited .*\n$gdb_prompt $" {
>             set program_exited 1
>             return 1;
>         }
> diff --git a/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp b/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
> index 6faabf5..232258e 100644
> --- a/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
> +++ b/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
> @@ -110,7 +110,6 @@ gdb_test_multiple "maint print dummy-frames" "dummy frame popped" {
> 
>  # Continue one last time, the program should exit normally.
> 
> -gdb_test "continue" "Program exited normally." \
> -    "continue to program exit"
> +gdb_continue_off_end
> 
>  return 0
> diff --git a/gdb/testsuite/gdb.threads/tls.exp b/gdb/testsuite/gdb.threads/tls.exp
> index 0e63120..ff294ff 100644
> --- a/gdb/testsuite/gdb.threads/tls.exp
> +++ b/gdb/testsuite/gdb.threads/tls.exp
> @@ -177,7 +177,7 @@ gdb_expect {
>          unsupported "continue to first thread: system does not support TLS"
>          return -1
>      }
> -    -re ".*Program exited normally.*$gdb_prompt $" {
> +    -re ".*Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>          fail "continue to first thread: program runaway"
>      }
>      -re ".*Pass 0 done.*Pass 1 done.*$gdb_prompt $" {
> diff --git a/gdb/testsuite/lib/cell.exp b/gdb/testsuite/lib/cell.exp
> index 4cc7ee0..86f77b2 100644
> --- a/gdb/testsuite/lib/cell.exp
> +++ b/gdb/testsuite/lib/cell.exp
> @@ -136,11 +136,11 @@ proc skip_cell_tests {} {
>      gdb_load "$exe"
>      gdb_run_cmd
>      gdb_expect {
> -        -re ".*Program exited normally.*${gdb_prompt} $" {
> +        -re ".*Inferior \[0-9\]+ exited normally.*${gdb_prompt} $" {
>              verbose -log "\n$me: Cell/B.E. hardware detected"
>              set skip_cell_tests_saved 0
>          }
> -        -re ".*Program exited with code.*${gdb_prompt} $" {
> +        -re ".*Inferior \[0-9\]+ exited with code.*${gdb_prompt} $" {
>              verbose -log "\n$me: Cell/B.E. hardware not detected"
>              set skip_cell_tests_saved 1
>          }
> diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp
> index 44d449a..91ddad5 100644
> --- a/gdb/testsuite/lib/gdb.exp
> +++ b/gdb/testsuite/lib/gdb.exp
> @@ -572,7 +572,7 @@ proc gdb_internal_error_resync {} {
>  #    }
>  # }
>  #
> -# The standard patterns, such as "Program exited..." and "A problem
> +# The standard patterns, such as "Inferior exited..." and "A problem
>  # ...", all being implicitly appended to that list.
>  #
>  proc gdb_test_multiple { command message user_code } {
> @@ -755,7 +755,7 @@ proc gdb_test_multiple { command message user_code } {
>              fail "$message"
>             set result 1
>         }
> -        -re "Program exited with code \[0-9\]+.*$gdb_prompt $" {
> +        -re "Inferior \[0-9\]+ exited with code \[0-9\]+.*$gdb_prompt $" {
>             if ![string match "" $message] then {
>                 set errmsg "$message (the program exited)"
>             } else {
> @@ -764,7 +764,7 @@ proc gdb_test_multiple { command message user_code } {
>             fail "$errmsg"
>             set result -1
>         }
> -        -re "Program exited normally.*$gdb_prompt $" {
> +        -re "Inferior \[0-9\]+ exited normally.*$gdb_prompt $" {
>             if ![string match "" $message] then {
>                 set errmsg "$message (the program exited)"
>             } else {
> @@ -1640,7 +1640,7 @@ proc skip_altivec_tests {} {
>              verbose -log "\n$me altivec hardware not detected"
>              set skip_vmx_tests_saved 1
>          }
> -        -re ".*Program exited normally.*${gdb_prompt} $" {
> +        -re ".*Inferior \[0-9\]+ exited normally.*${gdb_prompt} $" {
>              verbose -log "\n$me: altivec hardware detected"
>              set skip_vmx_tests_saved 0
>          }
> @@ -1727,7 +1727,7 @@ proc skip_vsx_tests {} {
>              verbose -log "\n$me VSX hardware not detected"
>              set skip_vsx_tests_saved 1
>          }
> -        -re ".*Program exited normally.*${gdb_prompt} $" {
> +        -re ".*Inferior \[0-9\]+ exited normally.*${gdb_prompt} $" {
>              verbose -log "\n$me: VSX hardware detected"
>              set skip_vsx_tests_saved 0
>          }
> @@ -3069,11 +3069,18 @@ proc gdb_continue_to_end {mssg} {
>      # Don't bother to check the output of the program, that may be
>      # extremely tough for some remote systems.
>      gdb_test "continue"\
> -      "Continuing.\[\r\n0-9\]+(... EXIT code 0\[\r\n\]+|Program exited normally\\.).*"\
> +      "Continuing.\[\r\n0-9\]+(... EXIT code 0\[\r\n\]+|Inferior \[0-9\]+ exited normally).*"\
>        "continue until exit at $mssg"
>    }
>  }
> 
> +# Invoke COMMAND, by default "continue", and expect GDB to exit
> +# normally.  TESTNAME is an optional test name.
> +proc gdb_continue_off_end {{command continue}
> +                          {testname "continue to program exit"}} {
> +    gdb_test $command "Inferior \[0-9\]+ exited normally." $testname
> +}
> +
>  proc rerun_to_main {} {
>    global gdb_prompt
> 
> diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp
> index 6b25f69..8d30a9f 100644
> --- a/gdb/testsuite/lib/mi-support.exp
> +++ b/gdb/testsuite/lib/mi-support.exp
> @@ -698,7 +698,7 @@ proc mi_gdb_test { args } {
>              fail "$message"
>             set result 1
>         }
> -        -re "Program exited with code \[0-9\]+.*$mi_gdb_prompt\[ \]*$" {
> +        -re "Inferior \[0-9\]+ exited with code \[0-9\]+.*$mi_gdb_prompt\[ \]*$" {
>             if ![string match "" $message] then {
>                 set errmsg "$message (the program exited)"
>             } else {
> diff --git a/gdb/testsuite/lib/opencl.exp b/gdb/testsuite/lib/opencl.exp
> index c1b5291..b722ba3 100644
> --- a/gdb/testsuite/lib/opencl.exp
> +++ b/gdb/testsuite/lib/opencl.exp
> @@ -59,11 +59,11 @@ proc skip_opencl_tests {} {
>      clean_restart "$executable"
>      gdb_run_cmd
>      gdb_expect 30 {
> -        -re ".*Program exited normally.*${gdb_prompt} $" {
> +        -re ".*Inferior \[0-9\]+ exited normally.*${gdb_prompt} $" {
>              verbose -log "\n$me: OpenCL support detected"
>              set skip_opencl_tests_saved($board) 0
>          }
> -        -re ".*Program exited with code.*${gdb_prompt} $" {
> +        -re ".*Inferior \[0-9\]+ exited code.*${gdb_prompt} $" {
>              verbose -log "\n$me: OpenCL support not detected"
>              set skip_opencl_tests_saved($board) 1
>          }