Mirror of the gdb-patches mailing list
 help / color / mirror / Atom feed
From: Mark Shinwell <shinwell@codesourcery.com>
To: gdb-patches@sourceware.org
Subject: Debugging of signal handlers on m68k targets
Date: Fri, 20 Apr 2007 11:04:00 -0000	[thread overview]
Message-ID: <4627E7F5.2020706@codesourcery.com> (raw)

This patch fixes a problem that manifests itself primarily when
debugging m68k uClinux targets.  If debugging a signal handler or
a callee thereof, failure can occur during backtracing since gdb's
description of the sigcontext structure does not match up with that
provided by the kernel.

This also fixes debugging on regular m68k Linux targets; there was
a typo in the sigcontext description there.

OK?

Mark

--


2007-04-19  Mark Shinwell  <shinwell@codesourcery.com>

	gdb/
	* Makefile.in: Adjust dependencies of m68klinux-tdep.c.
	* m68klinux-tdep.c (m68k_uclinux_sigcontext_reg_offset): New.
	(m68k_linux_sigcontext_reg_offset): Fix typo.
	(target_is_uclinux): New.
	(m68k_linux_inferior_created): New.
	(m68k_linux_get_sigtramp_info):  Check for uClinux or
	normal Linux.  Use m68k_uclinux_sigcontext_reg_offset for
   	uClinux.
	(_initialize_m68k_linux_tdep): Register
	m68k_linux_inferior_created.


=== gdb/Makefile.in
==================================================================
--- gdb/Makefile.in     (revision 169301)
+++ gdb/Makefile.in     (local)
@@ -2285,7 +2285,7 @@
         $(floatformat_h) $(frame_h) $(target_h) $(gdb_string_h) \
         $(gdbtypes_h) $(osabi_h) $(regcache_h) $(objfiles_h) $(symtab_h) \
         $(m68k_tdep_h) $(trad_frame_h) $(frame_unwind_h) $(glibc_tdep_h) \
-       $(solib_svr4_h)
+       $(solib_svr4_h) $(observer_h) $(elf_common_h)
  m68k-stub.o: m68k-stub.c
  m68k-tdep.o: m68k-tdep.c $(defs_h) $(dwarf2_frame_h) $(frame_h) \
         $(frame_base_h) $(frame_unwind_h) $(gdbtypes_h) $(symtab_h) \
=== gdb/m68klinux-tdep.c
==================================================================
--- gdb/m68klinux-tdep.c        (revision 169301)
+++ gdb/m68klinux-tdep.c        (local)
@@ -37,6 +37,9 @@
  #include "frame-unwind.h"
  #include "glibc-tdep.h"
  #include "solib-svr4.h"
+#include "auxv.h"
+#include "observer.h"
+#include "elf/common.h"


  /* Offsets (in target ints) into jmp_buf.  */

@@ -112,7 +115,7 @@
    -1,                          /* %a5 */
    -1,                          /* %fp */
    1 * 4,                       /* %sp */
-  5 * 4 + 2,                   /* %sr */
+  6 * 4,                       /* %sr */
    6 * 4 + 2,                   /* %pc */
    8 * 4,                       /* %fp0 */
    11 * 4,                      /* %fp1 */
@@ -127,6 +130,39 @@
    16 * 4                       /* %fpiaddr */
  };

+static int m68k_uclinux_sigcontext_reg_offset[M68K_NUM_REGS] =
+{
+  2 * 4,                       /* %d0 */
+  3 * 4,                       /* %d1 */
+  -1,                          /* %d2 */
+  -1,                          /* %d3 */
+  -1,                          /* %d4 */
+  -1,                          /* %d5 */
+  -1,                          /* %d6 */
+  -1,                          /* %d7 */
+  4 * 4,                       /* %a0 */
+  5 * 4,                       /* %a1 */
+  -1,                          /* %a2 */
+  -1,                          /* %a3 */
+  -1,                          /* %a4 */
+  6 * 4,                       /* %a5 */
+  -1,                          /* %fp */
+  1 * 4,                       /* %sp */
+  7 * 4,                       /* %sr */
+  7 * 4 + 2,                   /* %pc */
+  -1,                          /* %fp0 */
+  -1,                          /* %fp1 */
+  -1,                          /* %fp2 */
+  -1,                          /* %fp3 */
+  -1,                          /* %fp4 */
+  -1,                          /* %fp5 */
+  -1,                          /* %fp6 */
+  -1,                          /* %fp7 */
+  -1,                          /* %fpcr */
+  -1,                          /* %fpsr */
+  -1                           /* %fpiaddr */
+};
+
  /* From <asm/ucontext.h>.  */
  static int m68k_linux_ucontext_reg_offset[M68K_NUM_REGS] =
  {
@@ -173,6 +209,17 @@
    int *sc_reg_offset;
  };

+/* Nonzero if running on uClinux.  */
+static int target_is_uclinux;
+
+static void
+m68k_linux_inferior_created (struct target_ops *objfile, int from_tty)
+{
+  /* Record that we will need to re-evaluate whether we are running on
+     a uClinux or normal Linux target (see m68k_linux_get_sigtramp_info).  */
+  target_is_uclinux = -1;
+}
+
  static struct m68k_linux_sigtramp_info
  m68k_linux_get_sigtramp_info (struct frame_info *next_frame)
  {
@@ -180,6 +227,18 @@
    char buf[4];
    struct m68k_linux_sigtramp_info info;

+  if (target_is_uclinux == -1)
+    {
+      /* Determine whether we are running on a uClinux or normal Linux
+         target so we can use the correct sigcontext layouts.  */
+
+      CORE_ADDR dummy;
+
+      target_is_uclinux
+        = target_auxv_search (&current_target, AT_NULL, &dummy) > 0
+          && target_auxv_search (&current_target, AT_PAGESZ, &dummy) == 0;
+    }
+
    frame_unwind_register (next_frame, M68K_SP_REGNUM, buf);
    sp = extract_unsigned_integer (buf, 4);

@@ -189,7 +248,9 @@
    if (m68k_linux_pc_in_sigtramp (frame_pc_unwind (next_frame), 0) == 2)
      info.sc_reg_offset = m68k_linux_ucontext_reg_offset;
    else
-    info.sc_reg_offset = m68k_linux_sigcontext_reg_offset;
+    info.sc_reg_offset
+      = target_is_uclinux ? m68k_uclinux_sigcontext_reg_offset
+                         : m68k_linux_sigcontext_reg_offset;
    return info;
  }

@@ -319,4 +380,5 @@
  {
    gdbarch_register_osabi (bfd_arch_m68k, 0, GDB_OSABI_LINUX,
                           m68k_linux_init_abi);
+  observer_attach_inferior_created (m68k_linux_inferior_created);
  }


             reply	other threads:[~2007-04-19 22:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-04-20 11:04 Mark Shinwell [this message]
2007-04-20 12:19 ` Andreas Schwab
2007-04-20 23:33   ` Mark Shinwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4627E7F5.2020706@codesourcery.com \
    --to=shinwell@codesourcery.com \
    --cc=gdb-patches@sourceware.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox