From: Guinevere Larsen <guinevere@redhat.com>
To: "Schimpe, Christina" <christina.schimpe@intel.com>,
"gdb-patches@sourceware.org" <gdb-patches@sourceware.org>
Cc: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Subject: Re: [PATCH v4 1/8] gdb/record: Refactor record history
Date: Fri, 12 Jun 2026 15:07:07 -0300 [thread overview]
Message-ID: <4427ceac-8d8b-44ec-a8eb-a284de60ce96@redhat.com> (raw)
In-Reply-To: <SN7PR11MB76381C85B703BBA2071E284CF91A2@SN7PR11MB7638.namprd11.prod.outlook.com>
On 6/10/26 11:39 AM, Schimpe, Christina wrote:
> Hi Guinevere,
>
> I only have one further comment and found one nit. Please see below.
>
>> -----Original Message-----
>> From: Guinevere Larsen <guinevere@redhat.com>
>> Sent: Dienstag, 2. Juni 2026 16:34
>> To: gdb-patches@sourceware.org
>> Cc: Guinevere Larsen <guinevere@redhat.com>; Thiago Jung Bauermann
>> <thiago.bauermann@linaro.org>
>> Subject: [PATCH v4 1/8] gdb/record: Refactor record history
>>
>> This is the first step in a large refactor in how GDB keeps execution
>> history. Rather than using a linked list where multiple entries can
>> describe a single instruction, the history will now be stored in an
>> std::deque, each instruction being one entry in the deque.
>>
>> The choice was initially to use an std::vector, but it would become
>> unwieldy because it needs all the memory to be consecutive, which is
>> hard for 200 thousand entries. Deque was picked because it was a nice
>> midpoint between vector (maximum cache cohesion) and linked list
>> (maximum ease of finding space to store more).
>>
>> Each instruction in memory will be now one record_full_instruction
>> entry, which for this commit just contains a vector of
>> record_full_entry for the effects of the instruction, and the data that
>> was stored in the record_full_end entry (that is, the instruction number
>> and the signal, if any).
>>
>> This change introduced a minimal performance improvement (what's
>> important is that it isn't a degradation) and a reduction in the total
>> memory footprint of roughly 20% if the entire history is used.
>>
>> Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
>> ---
>> gdb/aarch64-tdep.c | 2 -
>> gdb/amd64-linux-tdep.c | 3 -
>> gdb/arm-tdep.c | 2 -
>> gdb/i386-linux-tdep.c | 3 -
>> gdb/i386-tdep.c | 4 -
>> gdb/loongarch-tdep.c | 2 -
>> gdb/moxie-tdep.c | 2 -
>> gdb/ppc-linux-tdep.c | 3 -
>> gdb/record-full.c | 1068 ++++++++++++++++------------------------
>> gdb/record-full.h | 1 -
>> gdb/riscv-tdep.c | 3 -
>> gdb/rs6000-tdep.c | 4 -
>> gdb/s390-linux-tdep.c | 3 -
>> gdb/s390-tdep.c | 2 -
>> 14 files changed, 422 insertions(+), 680 deletions(-)
>>
>> diff --git a/gdb/aarch64-tdep.c b/gdb/aarch64-tdep.c
>> index 673815c2763..2b767565b2f 100644
>> --- a/gdb/aarch64-tdep.c
>> +++ b/gdb/aarch64-tdep.c
>> @@ -6232,8 +6232,6 @@ aarch64_process_record (struct gdbarch *gdbarch,
>> struct regcache *regcache,
>> aarch64_record.aarch64_mems[rec_no].len))
>> ret = -1;
>>
>> - if (record_full_arch_list_add_end ())
>> - ret = -1;
>> }
>>
>> deallocate_reg_mem (&aarch64_record);
>> diff --git a/gdb/amd64-linux-tdep.c b/gdb/amd64-linux-tdep.c
>> index a5ac26654cf..9b23db72bbe 100644
>> --- a/gdb/amd64-linux-tdep.c
>> +++ b/gdb/amd64-linux-tdep.c
>> @@ -1591,9 +1591,6 @@ amd64_linux_record_signal (struct gdbarch
>> *gdbarch,
>> + AMD64_LINUX_frame_size))
>> return -1;
>>
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> -
>> return 0;
>> }
>>
>> diff --git a/gdb/arm-tdep.c b/gdb/arm-tdep.c
>> index 08cce9dbad8..1ce0927f26b 100644
>> --- a/gdb/arm-tdep.c
>> +++ b/gdb/arm-tdep.c
>> @@ -14911,8 +14911,6 @@ arm_process_record (struct gdbarch *gdbarch,
>> struct regcache *regcache,
>> }
>> }
>>
>> - if (record_full_arch_list_add_end ())
>> - ret = -1;
>> }
>>
>>
>> diff --git a/gdb/i386-linux-tdep.c b/gdb/i386-linux-tdep.c
>> index 23aeccac9fc..4f33766fcdd 100644
>> --- a/gdb/i386-linux-tdep.c
>> +++ b/gdb/i386-linux-tdep.c
>> @@ -949,9 +949,6 @@ i386_linux_record_signal (struct gdbarch *gdbarch,
>> I386_LINUX_xstate +
>> I386_LINUX_frame_size))
>> return -1;
>>
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> -
>> return 0;
>> }
>>
>> diff --git a/gdb/i386-tdep.c b/gdb/i386-tdep.c
>> index fa935b5fcdb..fee36b46a73 100644
>> --- a/gdb/i386-tdep.c
>> +++ b/gdb/i386-tdep.c
>> @@ -5201,8 +5201,6 @@ i386_record_vex (struct i386_record_s *ir, uint8_t
>> vex_w, uint8_t vex_r,
>> }
>>
>> record_full_arch_list_add_reg (ir->regcache, ir-
>>> regmap[X86_RECORD_REIP_REGNUM]);
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>>
>> return 0;
>> }
>> @@ -8359,8 +8357,6 @@ Do you want to stop the program?"),
>>
>> /* In the future, maybe still need to deal with need_dasm. */
>> I386_RECORD_FULL_ARCH_LIST_ADD_REG (X86_RECORD_REIP_REGNUM);
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>>
>> return 0;
>>
>> diff --git a/gdb/loongarch-tdep.c b/gdb/loongarch-tdep.c
>> index 225b1abb703..5ec6b2a48d0 100644
>> --- a/gdb/loongarch-tdep.c
>> +++ b/gdb/loongarch-tdep.c
>> @@ -2789,8 +2789,6 @@ loongarch_process_record (struct gdbarch
>> *gdbarch, struct regcache *regcache,
>> LOONGARCH_PC_REGNUM))
>> return -1;
>>
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> }
>>
>> return ret;
>> diff --git a/gdb/moxie-tdep.c b/gdb/moxie-tdep.c
>> index c8a04d21f59..2f8f0186488 100644
>> --- a/gdb/moxie-tdep.c
>> +++ b/gdb/moxie-tdep.c
>> @@ -1040,8 +1040,6 @@ moxie_process_record (struct gdbarch *gdbarch,
>> struct regcache *regcache,
>>
>> if (record_full_arch_list_add_reg (regcache, MOXIE_PC_REGNUM))
>> return -1;
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> return 0;
>> }
>>
>> diff --git a/gdb/ppc-linux-tdep.c b/gdb/ppc-linux-tdep.c
>> index 19698eaacbe..e2f53551709 100644
>> --- a/gdb/ppc-linux-tdep.c
>> +++ b/gdb/ppc-linux-tdep.c
>> @@ -1565,9 +1565,6 @@ ppc_linux_record_signal (struct gdbarch *gdbarch,
>> struct regcache *regcache,
>> if (record_full_arch_list_add_mem (sp, SIGNAL_FRAMESIZE +
>> sizeof_rt_sigframe))
>> return -1;
>>
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> -
>> return 0;
>> }
>>
>> diff --git a/gdb/record-full.c b/gdb/record-full.c
>> index 69d2c100e57..a6dfecd7d1f 100644
>> --- a/gdb/record-full.c
>> +++ b/gdb/record-full.c
>> @@ -47,6 +47,9 @@
>> #include "interps.h"
>> #include "cli/cli-style.h"
>>
>> +#include <vector>
>> +#include <optional>
>> +#include <deque>
>> #include <signal.h>
>>
>> /* This module implements "target record-full", also known as "process
>> @@ -72,20 +75,17 @@
>> #define DEFAULT_RECORD_FULL_INSN_MAX_NUM 200000
>>
>> #define RECORD_FULL_IS_REPLAY \
>> - (record_full_list->next || ::execution_direction == EXEC_REVERSE)
>> + ((record_full_next_insn != record_full_list.size ()) \
>> + || ::execution_direction == EXEC_REVERSE)
>>
>> #define RECORD_FULL_FILE_MAGIC netorder32(0x20091016)
>>
>> /* These are the core structs of the process record functionality.
>>
>> A record_full_entry is a record of the value change of a register
>> - ("record_full_reg") or a part of memory ("record_full_mem"). And each
>> - instruction must have a struct record_full_entry ("record_full_end")
>> - that indicates that this is the last struct record_full_entry of this
>> - instruction.
>> -
>> - Each struct record_full_entry is linked to "record_full_list" by "prev"
>> - and "next" pointers. */
>> + ("record_full_reg") or a part of memory ("record_full_mem").
>> + These are saved on the record_full_instruction struct, which also
>> + contains some extra information, such as delivered signals. */
>>
>> struct record_full_mem_entry
>> {
>> @@ -112,47 +112,14 @@ struct record_full_reg_entry
>> } u;
>> };
>>
>> -struct record_full_end_entry
>> -{
>> - enum gdb_signal sigval;
>> - ULONGEST insn_num;
>> -};
>> -
>> enum record_full_type
>> {
>> - record_full_end = 0,
>> record_full_reg,
>> record_full_mem
>> };
>>
>> -/* This is the data structure that makes up the execution log.
>> -
>> - The execution log consists of a single linked list of entries
>> - of type "struct record_full_entry". It is doubly linked so that it
>> - can be traversed in either direction.
>> -
>> - The start of the list is anchored by a struct called
>> - "record_full_first". The pointer "record_full_list" either points
>> - to the last entry that was added to the list (in record mode), or to
>> - the next entry in the list that will be executed (in replay mode).
>> -
>> - Each list element (struct record_full_entry), in addition to next
>> - and prev pointers, consists of a union of three entry types: mem,
>> - reg, and end. A field called "type" determines which entry type is
>> - represented by a given list element.
>> -
>> - Each instruction that is added to the execution log is represented
>> - by a variable number of list elements ('entries'). The instruction
>> - will have one "reg" entry for each register that is changed by
>> - executing the instruction (including the PC in every case). It
>> - will also have one "mem" entry for each memory change. Finally,
>> - each instruction will have an "end" entry that separates it from
>> - the changes associated with the next instruction. */
>> -
>> struct record_full_entry
>> {
>> - struct record_full_entry *prev;
>> - struct record_full_entry *next;
>> enum record_full_type type;
>> union
>> {
>> @@ -160,11 +127,31 @@ struct record_full_entry
>> struct record_full_reg_entry reg;
>> /* mem */
>> struct record_full_mem_entry mem;
>> - /* end */
>> - struct record_full_end_entry end;
>> } u;
>> };
>>
>> +/* This is the main structure that comprises the execution log.
>> + Each instruction is comprised of:
>> + * The instruction number: How many instructions were recorded before
>> + this one;
>> + * sigval: Whether the inferior received a signal while the following
>> + instruction was being recorded;
>> + * effects: A list of record_full_entry structures, each of which
>> + describing one effect that the instruction has on the inferior.
>> +
>> + Note, the signal is stored in the previous instruction for historical
>> + reasons. This is how it was first implemented, and no one has gotten
>> + around to changing it yet. */
>> +
>> +struct record_full_instruction
>> +{
>> + /* This might be different from the index if
>> + we had to remove the first few instructions. */
>> + uint32_t insn_num;
>> + std::optional<gdb_signal> sigval;
>> + std::vector<record_full_entry> effects;
>> +};
>> +
>> /* If true, query if PREC cannot record memory
>> change of next instruction. */
>> bool record_full_memory_query = false;
>> @@ -181,27 +168,25 @@ static detached_regcache
>> *record_full_core_regbuf = NULL;
>> static std::vector<target_section> record_full_core_sections;
>> static struct record_full_core_buf_entry *record_full_core_buf_list = NULL;
>>
>> -/* The following variables are used for managing the linked list that
>> - represents the execution log.
>> +/* The following variables are used for managing the history of executed
>> + instructions from the inferior.
>>
>> - record_full_first is the anchor that holds down the beginning of
>> - the list.
>> + record_full_list contains all instructions that were fully executed and
>> + saved to the log, so that we can replay the execution.
>>
>> - record_full_list serves two functions:
>> - 1) In record mode, it anchors the end of the list.
>> - 2) In replay mode, it traverses the list and points to
>> - the next instruction that must be emulated.
>> + record_full_next_insn always points to the next instruction that would
>> + be executed if the inferior executes forward. In the special case when
>> + the inferior is not replaying, record_full_next_insn points past the
>> + end of the history.
>>
>> - record_full_arch_list_head and record_full_arch_list_tail are used
>> - to manage a separate list, which is used to build up the change
>> - elements of the currently executing instruction during record mode.
>> - When this instruction has been completely annotated in the "arch
>> - list", it will be appended to the main execution log. */
>> + record_full_incomplete_instruction holds a partial instruction, while
>> + the lower target is disassembling the instruction, or as partial xfers are
>> + happening. It is manipulated by the "arch list" functions for historical
>> + reasons. */
>>
>> -static struct record_full_entry record_full_first;
>> -static struct record_full_entry *record_full_list = &record_full_first;
>> -static struct record_full_entry *record_full_arch_list_head = NULL;
>> -static struct record_full_entry *record_full_arch_list_tail = NULL;
>> +static std::deque<record_full_instruction> record_full_list;
>> +static record_full_instruction record_full_incomplete_instruction;
>> +static int record_full_next_insn;
>>
>> /* true ask user. false auto delete the last struct record_full_entry. */
>> static bool record_full_stop_at_limit = true;
>> @@ -361,6 +346,16 @@ record_full_target::kill ()
>> record_kill (this);
>> }
>>
>> +/* Reset the incomplete instruction. */
>> +
>> +static void
>> +record_full_reset_incomplete ()
>> +{
>> + record_full_incomplete_instruction.effects.clear ();
>> + record_full_incomplete_instruction.sigval.reset ();
>> + record_full_incomplete_instruction.insn_num = 0;
>> +}
>> +
>> /* See record-full.h. */
>>
>> int
>> @@ -390,156 +385,126 @@ static struct cmd_list_element
>> *show_record_full_cmdlist;
>> /* Command list for "record full". */
>> static struct cmd_list_element *record_full_cmdlist;
>>
>> -static void record_full_goto_insn (struct record_full_entry *entry,
>> +static void record_full_goto_insn (size_t target_insn,
>> enum exec_direction_kind dir);
>>
>> -/* Alloc and free functions for record_full_reg, record_full_mem, and
>> - record_full_end entries. */
>> +/* Initialization and cleanup functions for record_full_reg and
>> + record_full_mem entries. */
>>
>> -/* Alloc a record_full_reg record entry. */
>> +/* Init a record_full_reg record entry. */
>>
>> -static inline struct record_full_entry *
>> -record_full_reg_alloc (struct regcache *regcache, int regnum)
>> +static inline record_full_entry
>> +record_full_reg_init (struct regcache *regcache, int regnum)
>> {
>> - struct record_full_entry *rec;
>> + record_full_entry rec;
>> struct gdbarch *gdbarch = regcache->arch ();
>>
>> - rec = XCNEW (struct record_full_entry);
>> - rec->type = record_full_reg;
>> - rec->u.reg.num = regnum;
>> - rec->u.reg.len = register_size (gdbarch, regnum);
>> - if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
>> - rec->u.reg.u.ptr = (gdb_byte *) xmalloc (rec->u.reg.len);
>> + rec.type = record_full_reg;
>> + rec.u.reg.num = regnum;
>> + rec.u.reg.len = register_size (gdbarch, regnum);
>> + if (rec.u.reg.len > sizeof (rec.u.reg.u.buf))
>> + rec.u.reg.u.ptr = (gdb_byte *) xmalloc (rec.u.reg.len);
>>
>> return rec;
>> }
>>
>> -/* Free a record_full_reg record entry. */
>> +/* Cleanup a record_full_reg record entry. */
>>
>> static inline void
>> -record_full_reg_release (struct record_full_entry *rec)
>> +record_full_reg_cleanup (record_full_entry rec)
>> {
>> - gdb_assert (rec->type == record_full_reg);
>> - if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
>> - xfree (rec->u.reg.u.ptr);
>> - xfree (rec);
>> + gdb_assert (rec.type == record_full_reg);
>> + if (rec.u.reg.len > sizeof (rec.u.reg.u.buf))
>> + xfree (rec.u.reg.u.ptr);
>> }
>>
>> -/* Alloc a record_full_mem record entry. */
>> +/* Init a record_full_mem record entry. */
>>
>> -static inline struct record_full_entry *
>> -record_full_mem_alloc (CORE_ADDR addr, int len)
>> +static inline record_full_entry
>> +record_full_mem_init (CORE_ADDR addr, int len)
>> {
>> - struct record_full_entry *rec;
>> + record_full_entry rec;
>>
>> - rec = XCNEW (struct record_full_entry);
>> - rec->type = record_full_mem;
>> - rec->u.mem.addr = addr;
>> - rec->u.mem.len = len;
>> - if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
>> - rec->u.mem.u.ptr = (gdb_byte *) xmalloc (len);
>> + rec.type = record_full_mem;
>> + rec.u.mem.addr = addr;
>> + rec.u.mem.len = len;
>> + if (rec.u.mem.len > sizeof (rec.u.mem.u.buf))
>> + rec.u.mem.u.ptr = (gdb_byte *) xmalloc (len);
>> + rec.u.mem.mem_entry_not_accessible = 0;
>>
>> return rec;
>> }
>>
>> -/* Free a record_full_mem record entry. */
>> +/* Cleanup a record_full_mem record entry. */
>>
>> static inline void
>> -record_full_mem_release (struct record_full_entry *rec)
>> +record_full_mem_cleanup (record_full_entry rec)
>> {
>> - gdb_assert (rec->type == record_full_mem);
>> - if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
>> - xfree (rec->u.mem.u.ptr);
>> - xfree (rec);
>> + gdb_assert (rec.type == record_full_mem);
>> + if (rec.u.mem.len > sizeof (rec.u.mem.u.buf))
>> + xfree (rec.u.mem.u.ptr);
>> }
>>
>> -/* Alloc a record_full_end record entry. */
>> -
>> -static inline struct record_full_entry *
>> -record_full_end_alloc (void)
>> -{
>> - struct record_full_entry *rec;
>> -
>> - rec = XCNEW (struct record_full_entry);
>> - rec->type = record_full_end;
>> -
>> - return rec;
>> -}
>> -
>> -/* Free a record_full_end record entry. */
>> +/* Free one record entry, any type. */
>>
>> static inline void
>> -record_full_end_release (struct record_full_entry *rec)
>> -{
>> - xfree (rec);
>> -}
>> -
>> -/* Free one record entry, any type.
>> - Return entry->type, in case caller wants to know. */
>> -
>> -static inline enum record_full_type
>> -record_full_entry_release (struct record_full_entry *rec)
>> +record_full_entry_cleanup (record_full_entry rec)
>> {
>> - enum record_full_type type = rec->type;
>>
>> - switch (type) {
>> + switch (rec.type) {
>> case record_full_reg:
>> - record_full_reg_release (rec);
>> + record_full_reg_cleanup (rec);
>> break;
>> case record_full_mem:
>> - record_full_mem_release (rec);
>> - break;
>> - case record_full_end:
>> - record_full_end_release (rec);
>> + record_full_mem_cleanup (rec);
>> break;
>> }
>> - return type;
>> }
>>
>> -/* Free all record entries in list pointed to by REC. */
>> -
>> static void
>> -record_full_list_release (struct record_full_entry *rec)
>> +record_full_reset_history ()
>> {
>> - if (!rec)
>> - return;
>> -
>> - while (rec->next)
>> - rec = rec->next;
>> + record_full_insn_num = 0;
>> + record_full_insn_count = 0;
>> + record_full_next_insn = 0;
>>
>> - while (rec->prev)
>> + for (auto &insn : record_full_list)
>> {
>> - rec = rec->prev;
>> - record_full_entry_release (rec->next);
>> + for (auto &entry : insn.effects)
>> + record_full_entry_cleanup (entry);
>> }
>>
>> - if (rec == &record_full_first)
>> + record_full_list.clear ();
>> +}
>> +
>> +/* Release all record entries after the INDEXth entry in the log. */
>> +
>> +static void
>> +record_full_list_release_following (int index)
>> +{
>> + for (int i = record_full_list.size () - 1; i > index; i--)
> Can we get here with an empty list ? Then we should add a guard here, too.
> Otherwise, if that shouldn't happen maybe an assert would make sense?
We might be able to reach this call with an empty list, yeah. I've added
a guard here, just to be safe.
>
>> {
>> - record_full_insn_num = 0;
>> - record_full_first.next = NULL;
>> + for (auto &entry : record_full_list[i].effects)
>> + record_full_entry_cleanup (entry);
>> + record_full_list.pop_back ();
>> }
>> - else
>> - record_full_entry_release (rec);
>> + /* Set the next instruction to be past the end of the log so we
>> + start recording if the user moves forward again. */
>> + record_full_next_insn = index;
>> }
>>
>> -/* Free all record entries forward of the given list position. */
>> +/* Save the incomplete instruction in the log. */
>>
>> static void
>> -record_full_list_release_following (struct record_full_entry *rec)
>> +record_full_save_instruction ()
>> {
>> - struct record_full_entry *tmp = rec->next;
>> + ++record_full_insn_count;
>> + record_full_incomplete_instruction.insn_num = record_full_insn_count;
>> + record_full_incomplete_instruction.effects.shrink_to_fit ();
>> + record_full_list.push_back (std::move (record_full_incomplete_instruction));
>> + record_full_next_insn++;
>>
>> - rec->next = NULL;
>> - while (tmp)
>> - {
>> - rec = tmp->next;
>> - if (record_full_entry_release (tmp) == record_full_end)
>> - {
>> - record_full_insn_num--;
>> - record_full_insn_count--;
>> - }
>> - tmp = rec;
>> - }
>> + record_full_reset_incomplete ();
>> }
>>
>> /* Delete the first instruction from the beginning of the log, to make
>> @@ -550,52 +515,22 @@ record_full_list_release_following (struct
>> record_full_entry *rec)
>> static void
>> record_full_list_release_first (void)
>> {
>> - struct record_full_entry *tmp;
>> -
>> - if (!record_full_first.next)
>> + if (record_full_list.empty ())
>> return;
>>
>> - /* Loop until a record_full_end. */
>> - while (1)
>> - {
>> - /* Cut record_full_first.next out of the linked list. */
>> - tmp = record_full_first.next;
>> - record_full_first.next = tmp->next;
>> - tmp->next->prev = &record_full_first;
>> -
>> - /* tmp is now isolated, and can be deleted. */
>> - if (record_full_entry_release (tmp) == record_full_end)
>> - break; /* End loop at first record_full_end. */
>> + for (auto &entry : record_full_list[0].effects)
>> + record_full_entry_cleanup (entry);
>>
>> - if (!record_full_first.next)
>> - {
>> - gdb_assert (record_full_insn_num == 1);
>> - break; /* End loop when list is empty. */
>> - }
>> - }
>> + record_full_list.pop_front ();
>> + --record_full_next_insn;
>> }
>>
>> /* Add a struct record_full_entry to record_full_arch_list. */
>>
>> static void
>> -record_full_arch_list_add (struct record_full_entry *rec)
>> +record_full_arch_list_add (record_full_entry &rec)
>> {
>> - if (record_debug > 1)
>> - gdb_printf (gdb_stdlog,
>> - "Process record: record_full_arch_list_add %s.\n",
>> - host_address_to_string (rec));
>> -
>> - if (record_full_arch_list_tail)
>> - {
>> - record_full_arch_list_tail->next = rec;
>> - rec->prev = record_full_arch_list_tail;
>> - record_full_arch_list_tail = rec;
>> - }
>> - else
>> - {
>> - record_full_arch_list_head = rec;
>> - record_full_arch_list_tail = rec;
>> - }
>> + record_full_incomplete_instruction.effects.push_back (rec);
>> }
>>
>> /* Return the value storage location of a record entry. */
>> @@ -613,7 +548,6 @@ record_full_get_loc (struct record_full_entry *rec)
>> return rec->u.reg.u.ptr;
>> else
>> return rec->u.reg.u.buf;
>> - case record_full_end:
>> default:
>> gdb_assert_not_reached ("unexpected record_full_entry type");
>> return NULL;
>> @@ -625,7 +559,7 @@ record_full_get_loc (struct record_full_entry *rec)
>> int
>> record_full_arch_list_add_reg (struct regcache *regcache, int regnum)
>> {
>> - struct record_full_entry *rec;
>> + record_full_entry rec;
>>
>> if (record_debug > 1)
>> gdb_printf (gdb_stdlog,
>> @@ -633,9 +567,9 @@ record_full_arch_list_add_reg (struct regcache
>> *regcache, int regnum)
>> "record list.\n",
>> regnum);
>>
>> - rec = record_full_reg_alloc (regcache, regnum);
>> + rec = record_full_reg_init (regcache, regnum);
>>
>> - regcache->cooked_read (regnum, record_full_get_loc (rec));
>> + regcache->cooked_read (regnum, record_full_get_loc (&rec));
>>
>> record_full_arch_list_add (rec);
>>
>> @@ -648,7 +582,7 @@ record_full_arch_list_add_reg (struct regcache
>> *regcache, int regnum)
>> int
>> record_full_arch_list_add_mem (CORE_ADDR addr, int len)
>> {
>> - struct record_full_entry *rec;
>> + record_full_entry rec;
>>
>> if (record_debug > 1)
>> gdb_printf (gdb_stdlog,
>> @@ -659,12 +593,12 @@ record_full_arch_list_add_mem (CORE_ADDR addr,
>> int len)
>> if (!addr) /* FIXME: Why? Some arch must permit it... */
>> return 0;
>>
>> - rec = record_full_mem_alloc (addr, len);
>> + rec = record_full_mem_init (addr, len);
>>
>> if (record_read_memory (current_inferior ()->arch (), addr,
>> - record_full_get_loc (rec), len))
>> + record_full_get_loc (&rec), len))
>> {
>> - record_full_mem_release (rec);
>> + record_full_mem_cleanup (rec);
>> return -1;
>> }
>>
>> @@ -673,27 +607,6 @@ record_full_arch_list_add_mem (CORE_ADDR addr,
>> int len)
>> return 0;
>> }
>>
>> -/* Add a record_full_end type struct record_full_entry to
>> - record_full_arch_list. */
>> -
>> -int
>> -record_full_arch_list_add_end (void)
>> -{
>> - struct record_full_entry *rec;
>> -
>> - if (record_debug > 1)
>> - gdb_printf (gdb_stdlog,
>> - "Process record: add end to arch list.\n");
>> -
>> - rec = record_full_end_alloc ();
>> - rec->u.end.sigval = GDB_SIGNAL_0;
>> - rec->u.end.insn_num = ++record_full_insn_count;
>> -
>> - record_full_arch_list_add (rec);
>> -
>> - return 0;
>> -}
>> -
>> static void
>> record_full_check_insn_num (void)
>> {
>> @@ -725,8 +638,7 @@ record_full_message (struct regcache *regcache,
>> enum gdb_signal signal)
>>
>> try
>> {
>> - record_full_arch_list_head = NULL;
>> - record_full_arch_list_tail = NULL;
>> + record_full_reset_incomplete ();
>>
>> /* Check record_full_insn_num. */
>> record_full_check_insn_num ();
>> @@ -746,20 +658,16 @@ record_full_message (struct regcache *regcache,
>> enum gdb_signal signal)
>> the user says something different, like "deliver this signal"
>> during the replay mode).
>>
>> - User should understand that nothing he does during the replay
>> - mode will change the behavior of the child. If he tries,
>> + User should understand that nothing they do during the replay
>> + mode will change the behavior of the child. If they try,
>> then that is a user error.
>>
>> But we should still deliver the signal to gdb during the replay,
>> if we delivered it during the recording. Therefore we should
>> record the signal during record_full_wait, not
>> record_full_resume. */
>> - if (record_full_list != &record_full_first) /* FIXME better way
>> - to check */
>> - {
>> - gdb_assert (record_full_list->type == record_full_end);
>> - record_full_list->u.end.sigval = signal;
>> - }
>> + if (signal != GDB_SIGNAL_0 && !record_full_list.empty ())
>> + record_full_list[record_full_next_insn - 1].sigval = signal;
>>
>> if (signal == GDB_SIGNAL_0
>> || !gdbarch_process_record_signal_p (gdbarch))
>> @@ -778,13 +686,11 @@ record_full_message (struct regcache *regcache,
>> enum gdb_signal signal)
>> }
>> catch (const gdb_exception &ex)
>> {
>> - record_full_list_release (record_full_arch_list_tail);
>> + record_full_reset_incomplete ();
>> throw;
>> }
>>
>> - record_full_list->next = record_full_arch_list_head;
>> - record_full_arch_list_head->prev = record_full_list;
>> - record_full_list = record_full_arch_list_tail;
>> + record_full_save_instruction ();
>>
>> if (record_full_insn_num == record_full_insn_max_num)
>> record_full_list_release_first ();
>> @@ -829,9 +735,9 @@ static enum target_stop_reason
>> record_full_stop_reason
>> entries and memory entries, followed by an 'end' entry. */
>>
>> static inline void
>> -record_full_exec_insn (struct regcache *regcache,
>> - struct gdbarch *gdbarch,
>> - struct record_full_entry *entry)
>> +record_full_exec_entry (regcache *regcache,
>> + gdbarch *gdbarch,
>> + record_full_entry *entry)
>> {
>> switch (entry->type)
>> {
>> @@ -909,6 +815,17 @@ record_full_exec_insn (struct regcache *regcache,
>> }
>> }
>>
>> +/* Execute one entry in the log by executing all the effects. */
>> +
>> +static inline void
>> +record_full_exec_insn (regcache *regcache,
>> + gdbarch *gdbarch,
>> + record_full_instruction &insn)
>> +{
>> + for (auto &entry : insn.effects)
>> + record_full_exec_entry (regcache, gdbarch, &entry);
>> +}
>> +
>> static void record_full_restore (struct bfd &cbfd);
>>
>> /* Asynchronous signal handle registered as event loop source for when
>> @@ -983,10 +900,7 @@ record_full_open (const char *args, int from_tty)
>> record_preopen ();
>>
>> /* Reset */
>> - record_full_insn_num = 0;
>> - record_full_insn_count = 0;
>> - record_full_list = &record_full_first;
>> - record_full_list->next = NULL;
>> + record_full_reset_history ();
>>
>> bfd *cbfd = get_inferior_core_bfd (current_inferior ());
>> if (cbfd != nullptr)
>> @@ -1014,7 +928,7 @@ record_full_base_target::close ()
>> if (record_debug)
>> gdb_printf (gdb_stdlog, "Process record: record_full_close\n");
>>
>> - record_full_list_release (record_full_list);
>> + record_full_reset_history ();
>>
>> /* Release record_full_core_regbuf. */
>> if (record_full_core_regbuf)
>> @@ -1313,7 +1227,6 @@ record_full_wait_1 (struct target_ops *ops,
>> struct gdbarch *gdbarch = regcache->arch ();
>> const address_space *aspace = current_inferior ()->aspace.get ();
>> int continue_flag = 1;
>> - int first_record_full_end = 1;
>>
>> try
>> {
>> @@ -1322,7 +1235,6 @@ record_full_wait_1 (struct target_ops *ops,
>> record_full_stop_reason = TARGET_STOPPED_BY_NO_REASON;
>> status->set_stopped (GDB_SIGNAL_0);
>>
>> - /* Check breakpoint when forward execute. */
>> if (execution_direction == EXEC_FORWARD)
>> {
>> tmp_pc = regcache_read_pc (regcache);
>> @@ -1344,10 +1256,10 @@ record_full_wait_1 (struct target_ops *ops,
>> the signal. */
>> target_terminal::ours ();
>>
>> - /* In EXEC_FORWARD mode, record_full_list points to the tail of prev
>> - instruction. */
>> - if (execution_direction == EXEC_FORWARD && record_full_list->next)
>> - record_full_list = record_full_list->next;
>> + /* In EXEC_FORWARD mode, record_full_next_insn is the next
>> + instruction to be executed. */
>> + if (execution_direction == EXEC_REVERSE)
>> + record_full_next_insn--;
>>
>> /* Loop over the record_full_list, looking for the next place to
>> stop. */
>> @@ -1355,108 +1267,92 @@ record_full_wait_1 (struct target_ops *ops,
>> {
>> /* Check for beginning and end of log. */
>> if (execution_direction == EXEC_REVERSE
>> - && record_full_list == &record_full_first)
>> + && record_full_next_insn < 0)
>> {
>> /* Hit beginning of record log in reverse. */
>> status->set_no_history ();
>> + record_full_next_insn = 0;
>> break;
>> }
>> if (execution_direction != EXEC_REVERSE
>> - && !record_full_list->next)
>> + && record_full_next_insn == record_full_list.size ())
>> {
>> /* Hit end of record log going forward. */
>> status->set_no_history ();
>> break;
>> }
>>
>> - record_full_exec_insn (regcache, gdbarch, record_full_list);
>> + record_full_exec_insn
>> + (regcache, gdbarch,
>> + record_full_list[record_full_next_insn]);
>>
>> - if (record_full_list->type == record_full_end)
>> + /* step */
>> + if (record_full_resume_step)
>> {
>> if (record_debug > 1)
>> - gdb_printf
>> - (gdb_stdlog,
>> - "Process record: record_full_end %s to "
>> - "inferior.\n",
>> - host_address_to_string (record_full_list));
>> -
>> - if (first_record_full_end
>> - && execution_direction == EXEC_REVERSE)
>> - {
>> - /* When reverse execute, the first
>> - record_full_end is the part of current
>> - instruction. */
>> - first_record_full_end = 0;
>> - }
>> - else
>> - {
>> - /* In EXEC_REVERSE mode, this is the
>> - record_full_end of prev instruction. In
>> - EXEC_FORWARD mode, this is the
>> - record_full_end of current instruction. */
>> - /* step */
>> - if (record_full_resume_step)
>> - {
>> - if (record_debug > 1)
>> - gdb_printf (gdb_stdlog,
>> - "Process record: step.\n");
>> - continue_flag = 0;
>> - }
>> -
>> - /* check breakpoint */
>> - tmp_pc = regcache_read_pc (regcache);
>> - if (record_check_stopped_by_breakpoint
>> - (aspace, tmp_pc, &record_full_stop_reason))
>> - {
>> - if (record_debug)
>> - gdb_printf (gdb_stdlog,
>> - "Process record: break "
>> - "at %s.\n",
>> - paddress (gdbarch, tmp_pc));
>> + gdb_printf (gdb_stdlog,
>> + "Process record: step.\n");
>> + continue_flag = 0;
>> + }
>>
>> - continue_flag = 0;
>> - }
>> + /* check breakpoint */
>> + tmp_pc = regcache_read_pc (regcache);
>> + if (record_check_stopped_by_breakpoint
>> + (aspace, tmp_pc, &record_full_stop_reason))
>> + {
>> + if (record_debug)
>> + gdb_printf (gdb_stdlog,
>> + "Process record: break "
>> + "at %s.\n",
>> + paddress (gdbarch, tmp_pc));
>>
>> - if (record_full_stop_reason
>> - == TARGET_STOPPED_BY_WATCHPOINT)
>> - {
>> - if (record_debug)
>> - gdb_printf (gdb_stdlog,
>> - "Process record: hit hw "
>> - "watchpoint.\n");
>> - continue_flag = 0;
>> - }
>> - /* Check target signal */
>> - if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
>> - /* FIXME: better way to check */
>> - continue_flag = 0;
>> - }
>> + continue_flag = 0;
>> }
>>
>> - if (continue_flag)
>> + if (record_full_stop_reason
>> + == TARGET_STOPPED_BY_WATCHPOINT)
>> {
>> - if (execution_direction == EXEC_REVERSE)
>> - {
>> - if (record_full_list->prev)
>> - record_full_list = record_full_list->prev;
>> - }
>> - else
>> - {
>> - if (record_full_list->next)
>> - record_full_list = record_full_list->next;
>> - }
>> + if (record_debug)
>> + gdb_printf (gdb_stdlog,
>> + "Process record: hit hw "
>> + "watchpoint.\n");
>> + continue_flag = 0;
>> }
>> + if (record_full_list[record_full_next_insn].sigval.has_value ())
>> + continue_flag = 0;
>> +
>> + if (execution_direction == EXEC_REVERSE)
>> + record_full_next_insn--;
>> + else
>> + record_full_next_insn++;
>> }
>> while (continue_flag);
>>
>> + if (record_full_next_insn < 0)
>> + {
>> + gdb_assert (execution_direction == EXEC_REVERSE);
>> + record_full_next_insn = 0;
>> + }
>> + else if (record_full_next_insn > record_full_list.size ())
>> + {
>> + gdb_assert (execution_direction == EXEC_FORWARD);
>> + record_full_next_insn = record_full_list.size ();
>> + }
>> + /* Reset the current instruction to point to the one to be replayed
>> + moving forward. */
>> + else if (execution_direction == EXEC_REVERSE)
>> + record_full_next_insn++;
>> +
>> replay_out:
>> if (status->kind () == TARGET_WAITKIND_STOPPED)
>> {
>> + int insn = (execution_direction == EXEC_FORWARD)
>> + ? record_full_next_insn - 1 : record_full_next_insn;
>> if (record_full_get_sig)
>> status->set_stopped (GDB_SIGNAL_INT);
>> - else if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
>> - /* FIXME: better way to check */
>> - status->set_stopped (record_full_list->u.end.sigval);
>> + else if (record_full_list[insn].sigval.has_value ())
>> + status->set_stopped
>> + (record_full_list[insn].sigval.value ());
>> else
>> status->set_stopped (GDB_SIGNAL_TRAP);
>> }
>> @@ -1464,12 +1360,9 @@ record_full_wait_1 (struct target_ops *ops,
>> catch (const gdb_exception &ex)
>> {
>> if (execution_direction == EXEC_REVERSE)
>> - {
>> - if (record_full_list->next)
>> - record_full_list = record_full_list->next;
>> - }
>> + record_full_next_insn++;
>> else
>> - record_full_list = record_full_list->prev;
>> + record_full_next_insn--;
>>
>> throw;
>> }
>> @@ -1557,8 +1450,7 @@ record_full_registers_change (struct regcache
>> *regcache, int regnum)
>> /* Check record_full_insn_num. */
>> record_full_check_insn_num ();
>>
>> - record_full_arch_list_head = NULL;
>> - record_full_arch_list_tail = NULL;
>> + record_full_reset_incomplete ();
>>
>> if (regnum < 0)
>> {
>> @@ -1568,7 +1460,7 @@ record_full_registers_change (struct regcache
>> *regcache, int regnum)
>> {
>> if (record_full_arch_list_add_reg (regcache, i))
>> {
>> - record_full_list_release (record_full_arch_list_tail);
>> + record_full_reset_incomplete ();
>> error (_("Process record: failed to record execution log."));
>> }
>> }
>> @@ -1577,18 +1469,11 @@ record_full_registers_change (struct regcache
>> *regcache, int regnum)
>> {
>> if (record_full_arch_list_add_reg (regcache, regnum))
>> {
>> - record_full_list_release (record_full_arch_list_tail);
>> + record_full_reset_incomplete ();
>> error (_("Process record: failed to record execution log."));
>> }
>> }
>> - if (record_full_arch_list_add_end ())
>> - {
>> - record_full_list_release (record_full_arch_list_tail);
>> - error (_("Process record: failed to record execution log."));
>> - }
>> - record_full_list->next = record_full_arch_list_head;
>> - record_full_arch_list_head->prev = record_full_list;
>> - record_full_list = record_full_arch_list_tail;
>> + record_full_save_instruction ();
>>
>> if (record_full_insn_num == record_full_insn_max_num)
>> record_full_list_release_first ();
>> @@ -1607,7 +1492,7 @@ record_full_target::store_registers (struct
>> regcache *regcache, int regno)
>> {
>> int n;
>>
>> - /* Let user choose if he wants to write register or not. */
>> + /* Let user choose if they want to write register or not. */
>> if (regno < 0)
>> n =
>> query (_("Because GDB is in replay mode, changing the "
>> @@ -1642,7 +1527,7 @@ record_full_target::store_registers (struct
>> regcache *regcache, int regno)
>> }
>>
>> /* Destroy the record from here forward. */
>> - record_full_list_release_following (record_full_list);
>> + record_full_list_release_following (record_full_next_insn);
>> }
>>
>> record_full_registers_change (regcache, regno);
>> @@ -1675,36 +1560,24 @@ record_full_target::xfer_partial (enum
>> target_object object,
>> error (_("Process record canceled the operation."));
>>
>> /* Destroy the record from here forward. */
>> - record_full_list_release_following (record_full_list);
>> + record_full_list_release_following (record_full_next_insn);
>> }
>>
>> /* Check record_full_insn_num */
>> record_full_check_insn_num ();
>>
>> /* Record registers change to list as an instruction. */
>> - record_full_arch_list_head = NULL;
>> - record_full_arch_list_tail = NULL;
>> + record_full_reset_incomplete ();
>> if (record_full_arch_list_add_mem (offset, len))
>> {
>> - record_full_list_release (record_full_arch_list_tail);
>> + record_full_reset_incomplete ();
>> if (record_debug)
>> gdb_printf (gdb_stdlog,
>> "Process record: failed to record "
>> "execution log.");
>> return TARGET_XFER_E_IO;
>> }
>> - if (record_full_arch_list_add_end ())
>> - {
>> - record_full_list_release (record_full_arch_list_tail);
>> - if (record_debug)
>> - gdb_printf (gdb_stdlog,
>> - "Process record: failed to record "
>> - "execution log.");
>> - return TARGET_XFER_E_IO;
>> - }
>> - record_full_list->next = record_full_arch_list_head;
>> - record_full_arch_list_head->prev = record_full_list;
>> - record_full_list = record_full_arch_list_tail;
>> + record_full_save_instruction ();
>>
>> if (record_full_insn_num == record_full_insn_max_num)
>> record_full_list_release_first ();
>> @@ -1865,9 +1738,11 @@ record_full_base_target::get_bookmark (const
>> char *args, int from_tty)
>> {
>> char *ret = NULL;
>>
>> + if (record_full_list.empty ())
>> + return (gdb_byte *) ret;
>> +
>> /* Return stringified form of instruction count. */
>> - if (record_full_list && record_full_list->type == record_full_end)
>> - ret = xstrdup (pulongest (record_full_list->u.end.insn_num));
>> + ret = xstrdup (pulongest (record_full_list[record_full_next_insn].insn_num));
>>
>> if (record_debug)
>> {
>> @@ -1923,30 +1798,22 @@ record_full_base_target::record_method (ptid_t
>> ptid)
>> void
>> record_full_base_target::info_record ()
>> {
>> - struct record_full_entry *p;
>> -
>> if (RECORD_FULL_IS_REPLAY)
>> gdb_printf (_("Replay mode:\n"));
>> else
>> gdb_printf (_("Record mode:\n"));
>>
>> - /* Find entry for first actual instruction in the log. */
>> - for (p = record_full_first.next;
>> - p != NULL && p->type != record_full_end;
>> - p = p->next)
>> - ;
>> -
>> /* Do we have a log at all? */
>> - if (p != NULL && p->type == record_full_end)
>> + if (!record_full_list.empty ())
>> {
>> /* Display instruction number for first instruction in the log. */
>> - gdb_printf (_("Lowest recorded instruction number is %s.\n"),
>> - pulongest (p->u.end.insn_num));
>> + gdb_printf (_("Lowest recorded instruction number is %u.\n"),
>> + record_full_list[0].insn_num);
>>
>> /* If in replay mode, display where we are in the log. */
>> if (RECORD_FULL_IS_REPLAY)
>> - gdb_printf (_("Current instruction number is %s.\n"),
>> - pulongest (record_full_list->u.end.insn_num));
>> + gdb_printf (_("Current instruction number is %u.\n"),
>> + record_full_list[record_full_next_insn].insn_num);
>>
>> /* Display instruction number for last instruction in the log. */
>> gdb_printf (_("Highest recorded instruction number is %s.\n"),
>> @@ -1975,7 +1842,7 @@ record_full_base_target::supports_delete_record ()
>> void
>> record_full_base_target::delete_record ()
>> {
>> - record_full_list_release_following (record_full_list);
>> + record_full_reset_history ();
>> }
>>
>> /* The "record_is_replaying" target method. */
>> @@ -2001,23 +1868,23 @@ record_full_base_target::record_will_replay
>> (ptid_t ptid, int dir)
>> /* Go to a specific entry. */
>>
>> static void
>> -record_full_goto_entry (struct record_full_entry *p)
>> +record_full_goto_entry (size_t target_insn)
>> {
>> - if (p == NULL)
>> + if (target_insn >= record_full_list.size ())
>> error (_("Target insn not found."));
>> - else if (p == record_full_list)
>> + else if (target_insn == record_full_next_insn)
>> error (_("Already at target insn."));
>> - else if (p->u.end.insn_num > record_full_list->u.end.insn_num)
>> + else if (target_insn > record_full_next_insn)
>> {
>> gdb_printf (_("Go forward to insn number %s\n"),
>> - pulongest (p->u.end.insn_num));
>> - record_full_goto_insn (p, EXEC_FORWARD);
>> + pulongest (record_full_list[target_insn].insn_num));
>> + record_full_goto_insn (target_insn, EXEC_FORWARD);
>> }
>> else
>> {
>> gdb_printf (_("Go backward to insn number %s\n"),
>> - pulongest (p->u.end.insn_num));
>> - record_full_goto_insn (p, EXEC_REVERSE);
>> + pulongest (target_insn));
>> + record_full_goto_insn (target_insn, EXEC_REVERSE);
>> }
>>
>> registers_changed ();
>> @@ -2033,13 +1900,7 @@ record_full_goto_entry (struct record_full_entry
>> *p)
>> void
>> record_full_base_target::goto_record_begin ()
>> {
>> - struct record_full_entry *p = NULL;
>> -
>> - for (p = &record_full_first; p != NULL; p = p->next)
>> - if (p->type == record_full_end)
>> - break;
>> -
>> - record_full_goto_entry (p);
>> + record_full_goto_entry (0);
>> }
>>
>> /* The "goto_record_end" target method. */
>> @@ -2047,15 +1908,7 @@ record_full_base_target::goto_record_begin ()
>> void
>> record_full_base_target::goto_record_end ()
>> {
>> - struct record_full_entry *p = NULL;
>> -
>> - for (p = record_full_list; p->next != NULL; p = p->next)
>> - ;
>> - for (; p!= NULL; p = p->prev)
>> - if (p->type == record_full_end)
>> - break;
>> -
>> - record_full_goto_entry (p);
>> + record_full_goto_entry (record_full_list.size () - 1);
>> }
>>
>> /* The "goto_record" target method. */
>> @@ -2063,13 +1916,7 @@ record_full_base_target::goto_record_end ()
>> void
>> record_full_base_target::goto_record (ULONGEST target_insn)
>> {
>> - struct record_full_entry *p = NULL;
>> -
>> - for (p = &record_full_first; p != NULL; p = p->next)
>> - if (p->type == record_full_end && p->u.end.insn_num == target_insn)
>> - break;
>> -
>> - record_full_goto_entry (p);
>> + record_full_goto_entry (target_insn);
>> }
>>
>> /* The "record_stop_replaying" target method. */
>> @@ -2345,13 +2192,12 @@ static void
>> record_full_restore (struct bfd &cbfd)
>> {
>> uint32_t magic;
>> - struct record_full_entry *rec;
>> asection *osec;
>> uint32_t osec_size;
>> int bfd_offset = 0;
>>
>> /* "record_full_restore" can only be called when record list is empty. */
>> - gdb_assert (record_full_first.next == NULL);
>> + gdb_assert (record_full_list.empty ());
>>
>> if (record_debug)
>> gdb_printf (gdb_stdlog, "Restoring recording from core file.\n");
>> @@ -2379,124 +2225,118 @@ record_full_restore (struct bfd &cbfd)
>> "RECORD_FULL_FILE_MAGIC (0x%s)\n",
>> phex_nz (netorder32 (magic), 4));
>>
>> - /* Restore the entries in recfd into record_full_arch_list_head and
>> - record_full_arch_list_tail. */
>> - record_full_arch_list_head = NULL;
>> - record_full_arch_list_tail = NULL;
>> record_full_insn_num = 0;
>>
>> try
>> {
>> regcache *regcache = get_thread_regcache (inferior_thread ());
>>
>> - while (1)
>> + while (bfd_offset < osec_size)
>> {
>> - uint8_t rectype;
>> - uint32_t regnum, len, signal, count;
>> + uint8_t rectype, sigval;
>> + uint32_t regnum, len, eff_count, insn_num;
>> uint64_t addr;
>>
>> - /* We are finished when offset reaches osec_size. */
>> - if (bfd_offset >= osec_size)
>> - break;
>> - bfdcore_read (&cbfd, osec, &rectype, sizeof (rectype), &bfd_offset);
>> + record_full_reset_incomplete ();
>> +
>> + /* Frst read the generic information for an instruction. */
>> + bfdcore_read (&cbfd, osec, &sigval, sizeof (uint8_t), &bfd_offset);
>> + bfdcore_read (&cbfd, osec, &eff_count, sizeof (uint32_t),
>> + &bfd_offset);
>> + bfdcore_read (&cbfd, osec, &insn_num, sizeof (uint32_t),
>> + &bfd_offset);
>> +
>> + record_full_incomplete_instruction.insn_num = netorder32
>> (insn_num);
>> + if (sigval != GDB_SIGNAL_0)
>> + record_full_incomplete_instruction.sigval = (gdb_signal) sigval;
>> + eff_count = netorder32 (eff_count);
>>
>> - switch (rectype)
>> + /* This deals with all the side effects. */
>> + while (eff_count > 0)
>> {
>> - case record_full_reg: /* reg */
>> - /* Get register number to regnum. */
>> - bfdcore_read (&cbfd, osec, ®num, sizeof (regnum),
>> - &bfd_offset);
>> - regnum = netorder32 (regnum);
>> + eff_count--;
>>
>> - rec = record_full_reg_alloc (regcache, regnum);
>> + bfdcore_read (&cbfd, osec, &rectype, sizeof (rectype),
>> &bfd_offset);
>>
>> - /* Get val. */
>> - bfdcore_read (&cbfd, osec, record_full_get_loc (rec),
>> - rec->u.reg.len, &bfd_offset);
>> + switch (rectype)
>> + {
>> + case record_full_reg: /* reg */
>> + {
>> + /* Get register number to regnum. */
>> + bfdcore_read (&cbfd, osec, ®num, sizeof (regnum),
>> + &bfd_offset);
>> + regnum = netorder32 (regnum);
>>
>> - if (record_debug)
>> - gdb_printf (gdb_stdlog,
>> - " Reading register %d (1 "
>> - "plus %lu plus %d bytes)\n",
>> - rec->u.reg.num,
>> - (unsigned long) sizeof (regnum),
>> - rec->u.reg.len);
>> - break;
>> + record_full_entry rec;
>>
>> - case record_full_mem: /* mem */
>> - /* Get len. */
>> - bfdcore_read (&cbfd, osec, &len, sizeof (len), &bfd_offset);
>> - len = netorder32 (len);
>> + rec = record_full_reg_init (regcache, regnum);
>>
>> - /* Get addr. */
>> - bfdcore_read (&cbfd, osec, &addr, sizeof (addr), &bfd_offset);
>> - addr = netorder64 (addr);
>> + /* Get val. */
>> + bfdcore_read (&cbfd, osec, record_full_get_loc (&rec),
>> + rec.u.reg.len, &bfd_offset);
>>
>> - rec = record_full_mem_alloc (addr, len);
>> + if (record_debug)
>> + gdb_printf (gdb_stdlog,
>> + " Reading register %d (1 "
>> + "plus %lu plus %d bytes)\n",
>> + rec.u.reg.num,
>> + (unsigned long) sizeof (regnum),
>> + rec.u.reg.len);
>> +
>> + record_full_arch_list_add (rec);
>> + break;
>> + }
>>
>> - /* Get val. */
>> - bfdcore_read (&cbfd, osec, record_full_get_loc (rec),
>> - rec->u.mem.len, &bfd_offset);
>> + case record_full_mem: /* mem */
>> + {
>> + /* Get len. */
>> + bfdcore_read (&cbfd, osec, &len, sizeof (len),
>> + &bfd_offset);
>> + len = netorder32 (len);
>>
>> - if (record_debug)
>> - gdb_printf (gdb_stdlog,
>> - " Reading memory %s (1 plus "
>> - "%lu plus %lu plus %d bytes)\n",
>> - paddress (get_current_arch (),
>> - rec->u.mem.addr),
>> - (unsigned long) sizeof (addr),
>> - (unsigned long) sizeof (len),
>> - rec->u.mem.len);
>> - break;
>> + /* Get addr. */
>> + bfdcore_read (&cbfd, osec, &addr, sizeof (addr),
>> + &bfd_offset);
>> + addr = netorder64 (addr);
>>
>> - case record_full_end: /* end */
>> - rec = record_full_end_alloc ();
>> - record_full_insn_num ++;
>> -
>> - /* Get signal value. */
>> - bfdcore_read (&cbfd, osec, &signal, sizeof (signal),
>> - &bfd_offset);
>> - signal = netorder32 (signal);
>> - rec->u.end.sigval = (enum gdb_signal) signal;
>> -
>> - /* Get insn count. */
>> - bfdcore_read (&cbfd, osec, &count, sizeof (count), &bfd_offset);
>> - count = netorder32 (count);
>> - rec->u.end.insn_num = count;
>> - record_full_insn_count = count + 1;
>> - if (record_debug)
>> - gdb_printf (gdb_stdlog,
>> - " Reading record_full_end (1 + "
>> - "%lu + %lu bytes), offset == %s\n",
>> - (unsigned long) sizeof (signal),
>> - (unsigned long) sizeof (count),
>> - paddress (get_current_arch (),
>> - bfd_offset));
>> - break;
>> + record_full_entry rec;
>> + rec = record_full_mem_init (addr, len);
>>
>> - default:
>> - error (_("Bad entry type in core file %ps."),
>> - styled_string (file_name_style.style (),
>> - bfd_get_filename (&cbfd)));
>> - break;
>> + /* Get val. */
>> + bfdcore_read (&cbfd, osec, record_full_get_loc (&rec),
>> + len, &bfd_offset);
>> +
>> + if (record_debug)
>> + gdb_printf (gdb_stdlog,
>> + " Reading memory %s (1 plus "
>> + "%lu plus %lu plus %d bytes)\n",
>> + paddress (get_current_arch (),
>> + rec.u.mem.addr),
>> + (unsigned long) sizeof (addr),
>> + (unsigned long) sizeof (len),
>> + rec.u.mem.len);
>> +
>> + record_full_arch_list_add (rec);
>> + break;
>> + }
>> +
>> + default:
>> + error (_("Bad entry type in core file %ps."),
>> + styled_string (file_name_style.style (),
>> + bfd_get_filename (&cbfd)));
>> + break;
>> + }
>> }
>>
>> - /* Add rec to record arch list. */
>> - record_full_arch_list_add (rec);
>> + record_full_save_instruction ();
>> }
>> }
>> catch (const gdb_exception &ex)
>> {
>> - record_full_list_release (record_full_arch_list_tail);
>> + record_full_reset_incomplete ();
>> throw;
>> }
>>
>> - /* Add record_full_arch_list_head to the end of record list. */
>> - record_full_first.next = record_full_arch_list_head;
>> - record_full_arch_list_head->prev = &record_full_first;
>> - record_full_arch_list_tail->next = NULL;
>> - record_full_list = &record_full_first;
>> -
>> /* Update record_full_insn_max_num. */
>> if (record_full_insn_num > record_full_insn_max_num)
>> {
>> @@ -2505,6 +2345,10 @@ record_full_restore (struct bfd &cbfd)
>> record_full_insn_max_num);
>> }
>>
>> + /* When loading a recording, we'll always start at the oldest possible
>> + instruction, no matter where the original recording was stopped. */
>> + record_full_next_insn = 0;
>> +
>> /* Succeeded. */
>> gdb_printf (_("Restored records from core file %s.\n"),
>> bfd_get_filename (&cbfd));
>> @@ -2544,7 +2388,6 @@ cmd_record_full_restore (const char *args, int
>> from_tty)
>> void
>> record_full_base_target::save_record (const char *recfilename)
>> {
>> - struct record_full_entry *cur_record_full_list;
>> uint32_t magic;
>> struct gdbarch *gdbarch;
>> int save_size = 0;
>> @@ -2562,9 +2405,6 @@ record_full_base_target::save_record (const char
>> *recfilename)
>> /* Arrange to remove the output file on failure. */
>> gdb::unlinker unlink_file (recfilename);
>>
>> - /* Save the current record entry to "cur_record_full_list". */
>> - cur_record_full_list = record_full_list;
>> -
>> /* Get the values of regcache and gdbarch. */
>> regcache *regcache = get_thread_regcache (inferior_thread ());
>> gdbarch = regcache->arch ();
>> @@ -2574,34 +2414,27 @@ record_full_base_target::save_record (const
>> char *recfilename)
>> = record_full_gdb_operation_disable_set ();
>>
>> /* Reverse execute to the begin of record list. */
>> - while (1)
>> - {
>> - /* Check for beginning and end of log. */
>> - if (record_full_list == &record_full_first)
>> - break;
>> -
>> - record_full_exec_insn (regcache, gdbarch, record_full_list);
>> -
>> - if (record_full_list->prev)
>> - record_full_list = record_full_list->prev;
>> - }
>> + for (int i = record_full_next_insn - 1; i >= 0; i--)
>> + record_full_exec_insn (regcache, gdbarch,
>> + record_full_list[i]);
>>
>> /* Compute the size needed for the extra bfd section. */
>> save_size = 4; /* magic cookie */
>> - for (record_full_list = record_full_first.next; record_full_list;
>> - record_full_list = record_full_list->next)
>> - switch (record_full_list->type)
>> - {
>> - case record_full_end:
>> - save_size += 1 + 4 + 4;
>> - break;
>> - case record_full_reg:
>> - save_size += 1 + 4 + record_full_list->u.reg.len;
>> - break;
>> - case record_full_mem:
>> - save_size += 1 + 4 + 8 + record_full_list->u.mem.len;
>> - break;
>> - }
>> + for (int i = record_full_list.size () - 1; i >= 0; i--)
>> + {
>> + /* Number of effects of an instruction. */
>> + save_size += sizeof (uint32_t) + sizeof (uint8_t) + sizeof (uint32_t);
>> + for (auto &entry : record_full_list[i].effects)
>> + switch (entry.type)
>> + {
>> + case record_full_reg:
>> + save_size += 1 + 4 + entry.u.reg.len;
>> + break;
>> + case record_full_mem:
>> + save_size += 1 + 4 + 8 + entry.u.mem.len;
>> + break;
>> + }
>> + }
>>
>> /* Make the new bfd section. */
>> osec = bfd_make_section_anyway_with_flags (obfd.get (), "precord",
>> @@ -2630,39 +2463,54 @@ record_full_base_target::save_record (const
>> char *recfilename)
>>
>> /* Save the entries to recfd and forward execute to the end of
>> record list. */
>> - record_full_list = &record_full_first;
>> - while (1)
>> + for (int i = 0; i < record_full_list.size (); i++)
>> {
>> - /* Save entry. */
>> - if (record_full_list != &record_full_first)
>> + uint32_t eff_count = (uint32_t) record_full_list[i].effects.size ();
>> + uint32_t insn_num = record_full_list[i].insn_num;
>> + uint8_t sigval = (record_full_list[i].sigval.has_value ())
>> + ? record_full_list[i].sigval.value ()
>> + : GDB_SIGNAL_0;
>> +
>> + /* Signal. */
>> + bfdcore_write (obfd.get (), osec, &sigval, sizeof (sigval), &bfd_offset);
>> + /* Number of effects. */
>> + eff_count = netorder32 (eff_count);
>> + bfdcore_write (obfd.get (), osec, &eff_count, sizeof (eff_count),
>> + &bfd_offset);
>> + /* Instructio number. */
> Nit: there is an n missing.
Fixed
>
>> + bfdcore_write (obfd.get (), osec, &insn_num, sizeof (insn_num),
>> + &bfd_offset);
>> +
>> + for (auto &entry : record_full_list[i].effects)
>> {
>> + /* Save entry. */
>> uint8_t type;
>> - uint32_t regnum, len, signal, count;
>> + uint32_t regnum, len;
>> uint64_t addr;
>>
>> - type = record_full_list->type;
>> + type = entry.type;
>> bfdcore_write (obfd.get (), osec, &type, sizeof (type), &bfd_offset);
>>
>> - switch (record_full_list->type)
>> + switch (entry.type)
>> {
>> case record_full_reg: /* reg */
>> if (record_debug)
>> gdb_printf (gdb_stdlog,
>> " Writing register %d (1 "
>> "plus %lu plus %d bytes)\n",
>> - record_full_list->u.reg.num,
>> + entry.u.reg.num,
>> (unsigned long) sizeof (regnum),
>> - record_full_list->u.reg.len);
>> + entry.u.reg.len);
>>
>> /* Write regnum. */
>> - regnum = netorder32 (record_full_list->u.reg.num);
>> + regnum = netorder32 (entry.u.reg.num);
>> bfdcore_write (obfd.get (), osec, ®num,
>> sizeof (regnum), &bfd_offset);
>>
>> /* Write regval. */
>> bfdcore_write (obfd.get (), osec,
>> - record_full_get_loc (record_full_list),
>> - record_full_list->u.reg.len, &bfd_offset);
>> + record_full_get_loc (&entry),
>> + entry.u.reg.len, &bfd_offset);
>> break;
>>
>> case record_full_mem: /* mem */
>> @@ -2671,67 +2519,31 @@ record_full_base_target::save_record (const
>> char *recfilename)
>> " Writing memory %s (1 plus "
>> "%lu plus %lu plus %d bytes)\n",
>> paddress (gdbarch,
>> - record_full_list->u.mem.addr),
>> + entry.u.mem.addr),
>> (unsigned long) sizeof (addr),
>> (unsigned long) sizeof (len),
>> - record_full_list->u.mem.len);
>> + entry.u.mem.len);
>>
>> /* Write memlen. */
>> - len = netorder32 (record_full_list->u.mem.len);
>> + len = netorder32 (entry.u.mem.len);
>> bfdcore_write (obfd.get (), osec, &len, sizeof (len),
>> &bfd_offset);
>>
>> /* Write memaddr. */
>> - addr = netorder64 (record_full_list->u.mem.addr);
>> + addr = netorder64 (entry.u.mem.addr);
>> bfdcore_write (obfd.get (), osec, &addr,
>> sizeof (addr), &bfd_offset);
>>
>> /* Write memval. */
>> bfdcore_write (obfd.get (), osec,
>> - record_full_get_loc (record_full_list),
>> - record_full_list->u.mem.len, &bfd_offset);
>> + record_full_get_loc (&entry),
>> + entry.u.mem.len, &bfd_offset);
>> break;
>> -
>> - case record_full_end:
>> - if (record_debug)
>> - gdb_printf (gdb_stdlog,
>> - " Writing record_full_end (1 + "
>> - "%lu + %lu bytes)\n",
>> - (unsigned long) sizeof (signal),
>> - (unsigned long) sizeof (count));
>> - /* Write signal value. */
>> - signal = netorder32 (record_full_list->u.end.sigval);
>> - bfdcore_write (obfd.get (), osec, &signal,
>> - sizeof (signal), &bfd_offset);
>> -
>> - /* Write insn count. */
>> - count = netorder32 (record_full_list->u.end.insn_num);
>> - bfdcore_write (obfd.get (), osec, &count,
>> - sizeof (count), &bfd_offset);
>> - break;
>> }
>> }
>>
>> - /* Execute entry. */
>> - record_full_exec_insn (regcache, gdbarch, record_full_list);
>> -
>> - if (record_full_list->next)
>> - record_full_list = record_full_list->next;
>> - else
>> - break;
>> - }
>> -
>> - /* Reverse execute to cur_record_full_list. */
>> - while (1)
>> - {
>> - /* Check for beginning and end of log. */
>> - if (record_full_list == cur_record_full_list)
>> - break;
>> -
>> - record_full_exec_insn (regcache, gdbarch, record_full_list);
>> -
>> - if (record_full_list->prev)
>> - record_full_list = record_full_list->prev;
>> + if (i < record_full_next_insn)
>> + record_full_exec_insn (regcache, gdbarch, record_full_list[i]);
>> }
>>
>> unlink_file.keep ();
>> @@ -2742,11 +2554,11 @@ record_full_base_target::save_record (const
>> char *recfilename)
>> }
>>
>> /* record_full_goto_insn -- rewind the record log (forward or backward,
>> - depending on DIR) to the given entry, changing the program state
>> - correspondingly. */
>> + depending on DIR) to the entry in position TARGET_INSN in the history,
>> + changing the program state correspondingly. */
>>
>> static void
>> -record_full_goto_insn (struct record_full_entry *entry,
>> +record_full_goto_insn (size_t target_insn,
>> enum exec_direction_kind dir)
>> {
>> scoped_restore restore_operation_disable
>> @@ -2757,17 +2569,12 @@ record_full_goto_insn (struct record_full_entry
>> *entry,
>> /* Assume everything is valid: we will hit the entry,
>> and we will not hit the end of the recording. */
>>
>> - if (dir == EXEC_FORWARD)
>> - record_full_list = record_full_list->next;
>> -
>> - do
>> - {
>> - record_full_exec_insn (regcache, gdbarch, record_full_list);
>> - if (dir == EXEC_REVERSE)
>> - record_full_list = record_full_list->prev;
>> - else
>> - record_full_list = record_full_list->next;
>> - } while (record_full_list != entry);
>> + if (dir == EXEC_REVERSE)
>> + for (int i = record_full_next_insn; i > target_insn; i--)
>> + record_full_exec_insn (regcache, gdbarch, record_full_list[i - 1]);
>> + else
>> + for (int i = record_full_next_insn; i < target_insn; i++)
>> + record_full_exec_insn (regcache, gdbarch, record_full_list[i]);
>> }
>>
>> /* Alias for "target record-full". */
>> @@ -2798,61 +2605,36 @@ set_record_full_insn_max_num (const char
>> *args, int from_tty,
>> static void
>> maintenance_print_record_instruction (const char *args, int from_tty)
>> {
>> - struct record_full_entry *to_print = record_full_list;
>> + if (record_full_list.empty ())
>> + error (_("Not enough recorded history"));
>>
>> + int offset = record_full_next_insn - 1;
>> + /* Reduce the offset by 1 if the record_full_next_insn is after the end
>> + so that we show the last recorded instruction instead of crashing. */
>> + if (offset == record_full_list.size ())
>> + offset--;
>> if (args != nullptr)
>> {
>> - int offset = value_as_long (parse_and_eval (args));
>> - if (offset > 0)
>> - {
>> - /* Move forward OFFSET instructions. We know we found the
>> - end of an instruction when to_print->type is record_full_end. */
>> - while (to_print->next != nullptr && offset > 0)
>> - {
>> - to_print = to_print->next;
>> - if (to_print->type == record_full_end)
>> - offset--;
>> - }
>> - if (offset != 0)
>> - error (_("Not enough recorded history"));
>> - }
>> - else
>> - {
>> - while (to_print->prev != nullptr && offset < 0)
>> - {
>> - to_print = to_print->prev;
>> - if (to_print->type == record_full_end)
>> - offset++;
>> - }
>> - if (offset != 0)
>> - error (_("Not enough recorded history"));
>> - }
>> + offset += value_as_long (parse_and_eval (args));
>> + if (offset >= record_full_list.size () || offset < 0)
>> + error (_("Not enough recorded history"));
>> }
>> - gdb_assert (to_print != nullptr);
>> + auto to_print = record_full_list.begin () + offset;
>>
>> gdbarch *arch = current_inferior ()->arch ();
>>
>> - /* Go back to the start of the instruction. */
>> - while (to_print->prev != nullptr && to_print->prev->type != record_full_end)
>> - to_print = to_print->prev;
>> -
>> - /* if we're in the first record, there are no actual instructions
>> - recorded. Warn the user and leave. */
>> - if (to_print == &record_full_first)
>> - error (_("Not enough recorded history"));
>> -
>> - while (to_print->type != record_full_end)
>> + for (auto entry : to_print->effects)
>> {
>> - switch (to_print->type)
>> + switch (entry.type)
>> {
>> case record_full_reg:
>> {
>> - type *regtype = gdbarch_register_type (arch, to_print-
>>> u.reg.num);
>> + type *regtype = gdbarch_register_type (arch, entry.u.reg.num);
>> value *val
>> = value_from_contents (regtype,
>> - record_full_get_loc (to_print));
>> + record_full_get_loc (&entry));
>> gdb_printf ("Register %s changed: ",
>> - gdbarch_register_name (arch, to_print-
>>> u.reg.num));
>> + gdbarch_register_name (arch, entry.u.reg.num));
>> struct value_print_options opts;
>> get_user_print_options (&opts);
>> opts.raw = true;
>> @@ -2862,17 +2644,16 @@ maintenance_print_record_instruction (const
>> char *args, int from_tty)
>> }
>> case record_full_mem:
>> {
>> - gdb_byte *b = record_full_get_loc (to_print);
>> + gdb_byte *b = record_full_get_loc (&entry);
>> gdb_printf ("%d bytes of memory at address %s changed from:",
>> - to_print->u.mem.len,
>> - print_core_address (arch, to_print->u.mem.addr));
>> - for (int i = 0; i < to_print->u.mem.len; i++)
>> + entry.u.mem.len,
>> + print_core_address (arch, entry.u.mem.addr));
>> + for (int i = 0; i < entry.u.mem.len; i++)
>> gdb_printf (" %02x", b[i]);
>> gdb_printf ("\n");
>> break;
>> }
>> }
>> - to_print = to_print->next;
>> }
>> }
>>
>> @@ -2880,11 +2661,6 @@ INIT_GDB_FILE (record_full)
>> {
>> struct cmd_list_element *c;
>>
>> - /* Init record_full_first. */
>> - record_full_first.prev = NULL;
>> - record_full_first.next = NULL;
>> - record_full_first.type = record_full_end;
>> -
>> add_target (record_full_target_info, record_full_open);
>> add_deprecated_target_alias (record_full_target_info, "record");
>> add_target (record_full_core_target_info, record_full_open);
>> diff --git a/gdb/record-full.h b/gdb/record-full.h
>> index 51effe74560..c327d879a8a 100644
>> --- a/gdb/record-full.h
>> +++ b/gdb/record-full.h
>> @@ -41,7 +41,6 @@ enum record_result
>>
>> extern int record_full_arch_list_add_reg (struct regcache *regcache, int
>> num);
>> extern int record_full_arch_list_add_mem (CORE_ADDR addr, int len);
>> -extern int record_full_arch_list_add_end (void);
>>
>> /* Returns true if the process record target is open. */
>> extern int record_full_is_used (void);
>> diff --git a/gdb/riscv-tdep.c b/gdb/riscv-tdep.c
>> index 6b5c9c02d46..f5b1f66844c 100644
>> --- a/gdb/riscv-tdep.c
>> +++ b/gdb/riscv-tdep.c
>> @@ -5466,8 +5466,5 @@ riscv_process_record (struct gdbarch *gdbarch,
>> struct regcache *regcache,
>> if (res != RECORD_SUCCESS)
>> return res;
>>
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> -
>> return 0;
>> }
>> diff --git a/gdb/rs6000-tdep.c b/gdb/rs6000-tdep.c
>> index e135df94a40..f964889a49f 100644
>> --- a/gdb/rs6000-tdep.c
>> +++ b/gdb/rs6000-tdep.c
>> @@ -7138,8 +7138,6 @@ ppc_process_prefix_instruction (int insn_prefix, int
>> insn_suffix,
>> if (record_full_arch_list_add_reg (regcache, PPC_PC_REGNUM))
>> return -1;
>>
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> return 0;
>> }
>>
>> @@ -7447,8 +7445,6 @@ ppc_process_record (struct gdbarch *gdbarch,
>> struct regcache *regcache,
>>
>> if (record_full_arch_list_add_reg (regcache, PPC_PC_REGNUM))
>> return -1;
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> return 0;
>> }
>>
>> diff --git a/gdb/s390-linux-tdep.c b/gdb/s390-linux-tdep.c
>> index 3cd6b359d13..6bea30f08dc 100644
>> --- a/gdb/s390-linux-tdep.c
>> +++ b/gdb/s390-linux-tdep.c
>> @@ -910,9 +910,6 @@ s390_linux_record_signal (struct gdbarch *gdbarch,
>> struct regcache *regcache,
>> if (record_full_arch_list_add_mem (sp, sizeof_rt_sigframe))
>> return -1;
>>
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> -
>> return 0;
>> }
>>
>> diff --git a/gdb/s390-tdep.c b/gdb/s390-tdep.c
>> index f9d7bdd04e4..36ce659ea15 100644
>> --- a/gdb/s390-tdep.c
>> +++ b/gdb/s390-tdep.c
>> @@ -7019,8 +7019,6 @@ s390_process_record (struct gdbarch *gdbarch,
>> struct regcache *regcache,
>>
>> if (record_full_arch_list_add_reg (regcache, S390_PSWA_REGNUM))
>> return -1;
>> - if (record_full_arch_list_add_end ())
>> - return -1;
>> return 0;
>> }
>>
>> --
>> 2.54.0
>>
> There are still some code areas that I could not follow completely but I don’t think I’ll get there
> anytime soon.:)
>
> So please take my review with a grain of salt.
don't sell yourself short, I think you've done a phenomenal job! The
patch series is much better thanks to your thorough look through it!
I will leave the newest version on the list for a couple of weeks before
pushing, just in case anyone has further comments.
>
> Reviewed-By: Christina Schimpe <christina.schimpe@intel.com>
>
> Christina
> Intel Deutschland GmbH
>
> Registered Address: Dornacher Strasse 1, 85622 Feldkirchen, Germany
> Tel: +49 89 991 430, www.intel.de
> Managing Directors: Harry Demas, Jeffrey Schneiderman, Yin Chong Sorrell
> Chairperson of the Supervisory Board: Nicole Lau
> Registered Seat: Munich
> Commercial Register: Amtsgericht Muenchen HRB 186928
>
--
Cheers,
Guinevere Larsen
it/its
she/her (deprecated)
next prev parent reply other threads:[~2026-06-12 18:08 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-02 14:33 [PATCH v4 0/8] refactor the internals of record-full Guinevere Larsen
2026-06-02 14:33 ` [PATCH v4 1/8] gdb/record: Refactor record history Guinevere Larsen
2026-06-10 14:39 ` Schimpe, Christina
2026-06-12 18:07 ` Guinevere Larsen [this message]
2026-06-02 14:33 ` [PATCH v4 2/8] gdb/record: factor out reading and writing the execution log to corefile Guinevere Larsen
2026-06-10 14:40 ` Schimpe, Christina
2026-06-02 14:33 ` [PATCH v4 3/8] gdb/record: remove record_full_insn_num Guinevere Larsen
2026-06-02 14:33 ` [PATCH v4 4/8] gdb/record: c++ify internal structures of record-full.c Guinevere Larsen
2026-06-10 14:46 ` Schimpe, Christina
2026-06-10 19:07 ` Guinevere Larsen
2026-06-11 7:21 ` Schimpe, Christina
2026-06-11 17:16 ` Guinevere Larsen
2026-06-15 7:49 ` Schimpe, Christina
2026-06-25 20:41 ` Guinevere Larsen
2026-07-06 8:35 ` Schimpe, Christina
2026-06-02 14:33 ` [PATCH v4 5/8] gdb/record: make record_full_history more c++-like Guinevere Larsen
2026-06-02 14:33 ` [PATCH v4 6/8] gdb/record: extract the PC to record_full_instruction Guinevere Larsen
2026-06-02 14:33 ` [PATCH v4 7/8] gdb/record: Define new version of the record-save section Guinevere Larsen
2026-06-10 14:49 ` Schimpe, Christina
2026-06-02 14:33 ` [PATCH v4 8/8] gdb/record: rename record_full_list to record_full_log Guinevere Larsen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4427ceac-8d8b-44ec-a8eb-a284de60ce96@redhat.com \
--to=guinevere@redhat.com \
--cc=christina.schimpe@intel.com \
--cc=gdb-patches@sourceware.org \
--cc=thiago.bauermann@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox