From: Andrew Cagney <ac131313@cygnus.com>
To: Jiri Smid <smid@suse.cz>
Cc: gdb-patches@sources.redhat.com
Subject: Re: [RFA]: config stuff for x86_64
Date: Wed, 25 Jul 2001 11:10:00 -0000 [thread overview]
Message-ID: <3B5F0BAB.8050607@cygnus.com> (raw)
In-Reply-To: <s8vn15to5b6.fsf@naga.suse.cz>
> Hello,
>
> I am working on new target - AMD 64 bit processor and I want to start
> with committing changes to mainline.
>
> Andrew Cagney <ac131313@cygnus.com> writes:
>
>
>> If you can then just submit a two line minimal patch (to config say?) I'll have
>> a reason to get you into the write after approval list.
FYI,
The patch itself is ok, the ChangeLog isn't. ChangeLogs need to be
extracted from the diff.
The rationale is simple, a ChangeLog diff never applies correctly. In
fact, it always applies incorrectly acting like a virus inserting its
self into the ChangeLog file at some random location.
almost,
Andrew
Hello,
I am working on new target - AMD 64 bit processor and I want to start
with committing changes to mainline.
Andrew Cagney <ac131313@cygnus.com> writes:
> If you can then just submit a two line minimal patch (to config say?)
I'll have
> a reason to get you into the write after approval list.
Here is the first patch to config files:
Index: gdb/ChangeLog
===================================================================
RCS file: /cvs/src/src/gdb/ChangeLog,v
retrieving revision 1.1511
diff -c -3 -p -r1.1511 ChangeLog
*** ChangeLog 2001/07/24 21:51:36 1.1511
--- ChangeLog 2001/07/25 07:03:48
***************
*** 1,3 ****
--- 1,8 ----
+ 2001-07-25 Jiri Smid <smid@suse.cz>
+
+ * configure.host: Recognize x86_64-*-linux*.
+ * configure.tgt: Likewise.
+
2001-07-24 Stephen P. Smith <ischis2@home.com>
* MAINTAINERS (Stephen P. Smith): Added to write after approval
Index: gdb/configure.host
===================================================================
RCS file: /cvs/src/src/gdb/configure.host,v
retrieving revision 1.23
diff -c -3 -p -r1.23 configure.host
*** configure.host 2001/07/10 20:41:54 1.23
--- configure.host 2001/07/25 07:03:48
*************** mips*) gdb_host_cpu=mips ;;
*** 20,25 ****
--- 20,26 ----
powerpc*) gdb_host_cpu=powerpc ;;
sparc64) gdb_host_cpu=sparc ;;
s390*) gdb_host_cpu=s390 ;;
+ x86_64*) gdb_host_cpu=i386 ;;
*) gdb_host_cpu=$host_cpu ;;
esac
*************** xscale-*-*) gdb_host=arm ;;
*** 162,166 ****
--- 163,169 ----
vax-*-bsd*) gdb_host=vaxbsd ;;
vax-*-ultrix2*) gdb_host=vaxult2 ;;
vax-*-ultrix*) gdb_host=vaxult ;;
+
+ x86_64-*-linux*) gdb_host=x86_64 ;;
esac
Index: gdb/configure.tgt
===================================================================
RCS file: /cvs/src/src/gdb/configure.tgt,v
retrieving revision 1.34
diff -c -3 -p -r1.34 configure.tgt
*** configure.tgt 2001/07/19 05:10:38 1.34
--- configure.tgt 2001/07/25 07:03:48
*************** s390*) gdb_target_cpu=s390 ;;
*** 27,32 ****
--- 27,33 ----
strongarm*) gdb_target_cpu=arm ;;
xscale*) gdb_target_cpu=arm ;;
v850*) gdb_target_cpu=v850 ;;
+ x86_64*) gdb_target_cpu=i386 ;;
*) gdb_target_cpu=$target_cpu ;;
esac
*************** v850*-*-*) gdb_target=v850
*** 312,317 ****
--- 313,321 ----
;;
# OBSOLETE w65-*-*) gdb_target=w65 ;;
+
+ x86_64-*-linux*) gdb_target=x86_64
+ configdirs="${configdirs} gdbserver" ;;
z8k-*-coff*) gdb_target=z8k ;;
> Here is the first patch to config files:
>
> Index: gdb/ChangeLog
> ===================================================================
> RCS file: /cvs/src/src/gdb/ChangeLog,v
> retrieving revision 1.1511
> diff -c -3 -p -r1.1511 ChangeLog
> *** ChangeLog 2001/07/24 21:51:36 1.1511
> --- ChangeLog 2001/07/25 07:03:48
> ***************
> *** 1,3 ****
> --- 1,8 ----
> + 2001-07-25 Jiri Smid <smid@suse.cz>
> +
> + * configure.host: Recognize x86_64-*-linux*.
> + * configure.tgt: Likewise.
> +
> 2001-07-24 Stephen P. Smith <ischis2@home.com>
> * MAINTAINERS (Stephen P. Smith): Added to write after approval
> Index: gdb/configure.host
> ===================================================================
> RCS file: /cvs/src/src/gdb/configure.host,v
> retrieving revision 1.23
> diff -c -3 -p -r1.23 configure.host
> *** configure.host 2001/07/10 20:41:54 1.23
> --- configure.host 2001/07/25 07:03:48
> *************** mips*) gdb_host_cpu=mips ;;
> *** 20,25 ****
> --- 20,26 ----
> powerpc*) gdb_host_cpu=powerpc ;;
> sparc64) gdb_host_cpu=sparc ;;
> s390*) gdb_host_cpu=s390 ;;
> + x86_64*) gdb_host_cpu=i386 ;;
> *) gdb_host_cpu=$host_cpu ;;
>
> esac
> *************** xscale-*-*) gdb_host=arm ;;
> *** 162,166 ****
> --- 163,169 ----
> vax-*-bsd*) gdb_host=vaxbsd ;;
> vax-*-ultrix2*) gdb_host=vaxult2 ;;
> vax-*-ultrix*) gdb_host=vaxult ;;
> +
> + x86_64-*-linux*) gdb_host=x86_64 ;;
>
> esac
> Index: gdb/configure.tgt
> ===================================================================
> RCS file: /cvs/src/src/gdb/configure.tgt,v
> retrieving revision 1.34
> diff -c -3 -p -r1.34 configure.tgt
> *** configure.tgt 2001/07/19 05:10:38 1.34
> --- configure.tgt 2001/07/25 07:03:48
> *************** s390*) gdb_target_cpu=s390 ;;
> *** 27,32 ****
> --- 27,33 ----
> strongarm*) gdb_target_cpu=arm ;;
> xscale*) gdb_target_cpu=arm ;;
> v850*) gdb_target_cpu=v850 ;;
> + x86_64*) gdb_target_cpu=i386 ;;
> *) gdb_target_cpu=$target_cpu ;;
>
> esac
> *************** v850*-*-*) gdb_target=v850
> *** 312,317 ****
> --- 313,321 ----
> ;;
>
> # OBSOLETE w65-*-*) gdb_target=w65 ;;
> +
> + x86_64-*-linux*) gdb_target=x86_64
> + configdirs="${configdirs} gdbserver" ;;
>
> z8k-*-coff*) gdb_target=z8k ;;
>
>
>
>
>
next prev parent reply other threads:[~2001-07-25 11:10 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-07-25 0:07 Jiri Smid
2001-07-25 11:10 ` Andrew Cagney [this message]
2001-07-25 11:44 ` Tom Tromey
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3B5F0BAB.8050607@cygnus.com \
--to=ac131313@cygnus.com \
--cc=gdb-patches@sources.redhat.com \
--cc=smid@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox