Re: David Taylor: [RFA] insight gdb_stdlog bug

Fernando Nasser
2001-01-02T11:23:00Z

David Taylor wrote:
>
> Just a ping -- I never saw a response to this.
>
> I believe that I need approvals from:
>
> . ezannoni for the change to main.c
>

Elena is on vacations. I believe your change fall in the "obvious
simple fix"
category though.

> . spolk (backup: fnasser, jingham) for the change to gdbtk-hooks.c

The gdbtk part is approved. Please note that the ChangeLog to use now
is the one at gdb/gdbtk

>
> . some blanket write priv's maintainer for the tui-file.c change (my
> understanding is that Jimmy Guo has left HP and has no interest in
> continuing GDB TUI maintainership -- please correct me if you know
> otherwise).
>

The tui-file.c is still actively used by GDB (there is a cleanup item in
the TODO file to stop using it), so we are maintaining it.

I guess your change here is another simple fix one.

Fernando

> ------- Forwarded Message
>
> To: insight@sources.redhat.com
> cc: gdb-patches@sourceware.cygnus.com
> Subject: [RFA] insight gdb_stdlog bug
> Date: Wed, 20 Dec 2000 17:52:45 -0500
> From: David Taylor <taylor@texas.cygnus.com>
>
> When GDBTK_TO_RESULT is set, insight gobbles all output written to
> gdb_stdlog. But, the stuff written to gdb_stdlog isn't meant to be
> parsed by insight -- it's meant to be read by a person.
>
> While it might be desired -- when GDBTK_TO_RESULT is not set -- that
> gdb_stdlog go the same place as gdb_stdout, it cannot have the same
> pointer value as gdb_stdout or the code won't be able to distinguish
> output meant for gdb_stdout vs output meant for gdb_stdlog when
> GDBTK_TO_RESULT is set.
>
> The following patch fixes that. (The result is that output written to
> gdb_stdlog appears in the insight console window if it is active.)
>
> ChangeLog entries (3 separate ChangeLog files):
>
> * main.c (captured_main): Initialize gdb_stdlog to a copy of
> gdb_stdout rather than to gdb_stdout, so that code can distinguish
> them.
>
> * tui/tui-file.c (tui_file_fputs): Handle gdb_stdlog the same
> as gdb_stdout.
>
> * gdbtk/generic/gdbtk-hooks.c (gdbtk_fputs): Distinguish between
> gdb_stdlog and gdb_stdout.
>
> Index: main.c
> ===================================================================
> RCS file: /cvs/cvsfiles/devo/gdb/main.c,v
> retrieving revision 1.207.12.1
> diff -c -r1.207.12.1 main.c
> *** main.c 2000/11/13 02:10:59 1.207.12.1
> - --- main.c 2000/12/20 22:23:25
> ***************
> *** 203,209 ****
> within its own _initialize function. */
> gdb_stdout = tui_fileopen (stdout);
> gdb_stderr = tui_fileopen (stderr);
> ! gdb_stdlog = gdb_stdout; /* for moment */
> gdb_stdtarg = gdb_stderr; /* for moment */
> #else
> gdb_stdout = stdio_fileopen (stdout);
> - --- 203,209 ----
> within its own _initialize function. */
> gdb_stdout = tui_fileopen (stdout);
> gdb_stderr = tui_fileopen (stderr);
> ! gdb_stdlog = tui_fileopen (stdout); /* for moment */
> gdb_stdtarg = gdb_stderr; /* for moment */
> #else
> gdb_stdout = stdio_fileopen (stdout);
> Index: tui/tui-file.c
> ===================================================================
> RCS file: /cvs/cvsfiles/devo/gdb/tui/tui-file.c,v
> retrieving revision 1.5
> diff -c -r1.5 tui-file.c
> *** tui-file.c 2000/07/30 01:50:07 1.5
> - --- tui-file.c 2000/12/20 22:23:25
> ***************
> *** 181,187 ****
> also tui_file_flush(). */
> if (fputs_unfiltered_hook
> && (file == gdb_stdout
> ! || file == gdb_stderr))
> fputs_unfiltered_hook (linebuffer, file);
> else
> {
> - --- 181,188 ----
> also tui_file_flush(). */
> if (fputs_unfiltered_hook
> && (file == gdb_stdout
> ! || file == gdb_stderr
> ! || file == gdb_stdlog))
> fputs_unfiltered_hook (linebuffer, file);
> else
> {
> Index: gdbtk/generic/gdbtk-hooks.c
> ===================================================================
> RCS file: /cvs/cvsfiles/devo/gdb/gdbtk/generic/gdbtk-hooks.c,v
> retrieving revision 1.7
> diff -c -r1.7 gdbtk-hooks.c
> *** gdbtk-hooks.c 2000/10/23 22:42:01 1.7
> - --- gdbtk-hooks.c 2000/12/20 22:23:29
> ***************
> *** 250,256 ****
>
> if (result_ptr != NULL)
> {
> ! if (result_ptr->flags & GDBTK_TO_RESULT)
> {
> if (result_ptr->flags & GDBTK_MAKES_LIST)
> Tcl_ListObjAppendElement (NULL, result_ptr->obj_ptr,
> - --- 250,258 ----
>
> if (result_ptr != NULL)
> {
> ! if (stream == gdb_stdlog)
> ! gdbtk_two_elem_cmd ("gdbtk_tcl_fputs", (char *) ptr);
> ! else if (result_ptr->flags & GDBTK_TO_RESULT)
> {
> if (result_ptr->flags & GDBTK_MAKES_LIST)
> Tcl_ListObjAppendElement (NULL, result_ptr->obj_ptr,
>
> ------- End of Forwarded Message
From msnyder@redhat.com Tue Jan 02 11:40:00 2001
From: Michael Snyder <msnyder@redhat.com>
To: Mark Kettenis <kettenis@wins.uva.nl>
Cc: gdb-patches@sources.redhat.com
Subject: Re: [PATCH] Fix setting function return values for x86 targets
Date: Tue, 02 Jan 2001 11:40:00 -0000
Message-id: <3A522E9E.6D99@redhat.com>
References: <200012221054.eBMAsWt04034@debye.wins.uva.nl>
X-SW-Source: 2001-01/msg00003.html
Content-length: 550

Mark Kettenis wrote:
>
> FYI, this patch fixes some problems uncovered by Michaels new
> gdb.base/return2.exp tests for the x86. STORE_RETURN_VALUE didn't
> handle long long's and floating point values correctly. There are
> still some problems with floating point values (similar to the
> problems with extracting return values, such that some of the new
> tests still fail. I'll try to come up with a fix, which should be
> possible for native GDB (or x86 x x86 cross).
>
> Tested on i586-pc-linux-gnu & checked in.

Looks good. Thanks Mark.
From msnyder@redhat.com Tue Jan 02 12:22:00 2001
From: Michael Snyder <msnyder@redhat.com>
To: gdb-patches@sources.redhat.com
Subject: Re: [PATCH]: New default method for multi-arch
Date: Tue, 02 Jan 2001 12:22:00 -0000
Message-id: <3A52388A.2CFE48DA@redhat.com>
References: <3A41597F.18314006@redhat.com>
X-SW-Source: 2001-01/msg00004.html
Content-length: 8371

Committed.

Michael Snyder wrote:
>
> This is an example of a multi-arched method that should have a default
> impl.
> (because many architectures do it the same way).
>
> ------------------------------------------------------------------------
> 2000-12-20 Michael Snyder <msnyder@mvstp600e.cygnus.com>
>
> * arch-utils.c (default_frame_address): New function. Default
> implementation of frame_args_address and frame_locals_address.
> * arch-utils.h (default_frame_address): Export.
> * d10v-tdep.c (d10v_gdbarch_init): Use default_frame_address.
> (d10v_frame_args_address, d10v_frame_locals_address): Delete.
> * sh-tdep.c (sh_gdbarch_init): Use default_frame_address.
> (sh_frame_args_address, sh_frame_locals_address): Delete.
> * sparc-tdep.c (sparc_gdbarch_init): Use default_frame_address.
> (sparc_frame_address): Delete.
>
> Index: arch-utils.c
> ===================================================================
> RCS file: /cvs/src/src/gdb/arch-utils.c,v
> retrieving revision 1.18
> diff -c -3 -p -r1.18 arch-utils.c
> *** arch-utils.c 2000/12/15 01:01:45 1.18
> --- arch-utils.c 2000/12/20 23:44:23
> *************** no_op_reg_to_regnum (int reg)
> *** 239,244 ****
> --- 239,251 ----
> return reg;
> }
>
> + /* For use by frame_args_address and frame_locals_address. */
> + CORE_ADDR
> + default_frame_address (struct frame_info *fi)
> + {
> + return fi->frame;
> + }
> +
> /* Functions to manipulate the endianness of the target. */
>
> #ifdef TARGET_BYTE_ORDER_SELECTABLE
> Index: arch-utils.h
> ===================================================================
> RCS file: /cvs/src/src/gdb/arch-utils.h,v
> retrieving revision 1.11
> diff -c -3 -p -r1.11 arch-utils.h
> *** arch-utils.h 2000/12/04 04:01:15 1.11
> --- arch-utils.h 2000/12/20 23:44:23
> *************** extern CORE_ADDR default_convert_from_fu
> *** 101,104 ****
> --- 101,109 ----
>
> extern int no_op_reg_to_regnum (int reg);
>
> + /* Default frame_args_address and frame_locals_address. */
> +
> + extern CORE_ADDR default_frame_address (struct frame_info *);
> +
> +
> #endif
> Index: d10v-tdep.c
> ===================================================================
> RCS file: /cvs/src/src/gdb/d10v-tdep.c,v
> retrieving revision 1.13
> diff -c -3 -p -r1.13 d10v-tdep.c
> *** d10v-tdep.c 2000/12/15 01:01:46 1.13
> --- d10v-tdep.c 2000/12/20 23:44:23
> *************** d10v_frame_saved_pc (struct frame_info *
> *** 438,455 ****
> return ((frame)->extra_info->return_pc);
> }
>
> - CORE_ADDR
> - d10v_frame_args_address (struct frame_info *fi)
> - {
> - return (fi)->frame;
> - }
> -
> - CORE_ADDR
> - d10v_frame_locals_address (struct frame_info *fi)
> - {
> - return (fi)->frame;
> - }
> -
> /* Immediately after a function call, return the saved pc. We can't
> use frame->return_pc beause that is determined by reading R13 off
> the stack and that may not be written yet. */
> --- 438,443 ----
> *************** d10v_gdbarch_init (struct gdbarch_info i
> *** 1592,1599 ****
> set_gdbarch_frame_chain (gdbarch, d10v_frame_chain);
> set_gdbarch_frame_chain_valid (gdbarch, d10v_frame_chain_valid);
> set_gdbarch_frame_saved_pc (gdbarch, d10v_frame_saved_pc);
> ! set_gdbarch_frame_args_address (gdbarch, d10v_frame_args_address);
> ! set_gdbarch_frame_locals_address (gdbarch, d10v_frame_locals_address);
> set_gdbarch_saved_pc_after_call (gdbarch, d10v_saved_pc_after_call);
> set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
> set_gdbarch_stack_align (gdbarch, d10v_stack_align);
> --- 1580,1587 ----
> set_gdbarch_frame_chain (gdbarch, d10v_frame_chain);
> set_gdbarch_frame_chain_valid (gdbarch, d10v_frame_chain_valid);
> set_gdbarch_frame_saved_pc (gdbarch, d10v_frame_saved_pc);
> ! set_gdbarch_frame_args_address (gdbarch, default_frame_address);
> ! set_gdbarch_frame_locals_address (gdbarch, default_frame_address);
> set_gdbarch_saved_pc_after_call (gdbarch, d10v_saved_pc_after_call);
> set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
> set_gdbarch_stack_align (gdbarch, d10v_stack_align);
> Index: sh-tdep.c
> ===================================================================
> RCS file: /cvs/src/src/gdb/sh-tdep.c,v
> retrieving revision 1.25
> diff -c -3 -p -r1.25 sh-tdep.c
> *** sh-tdep.c 2000/12/19 23:20:45 1.25
> --- sh-tdep.c 2000/12/20 23:44:23
> *************** sh_frame_saved_pc (struct frame_info *fr
> *** 850,867 ****
> return ((frame)->extra_info->return_pc);
> }
>
> - static CORE_ADDR
> - sh_frame_args_address (struct frame_info *fi)
> - {
> - return (fi)->frame;
> - }
> -
> - static CORE_ADDR
> - sh_frame_locals_address (struct frame_info *fi)
> - {
> - return (fi)->frame;
> - }
> -
> /* Discard from the stack the innermost frame,
> restoring all saved registers. */
> static void
> --- 850,855 ----
> *************** sh_gdbarch_init (struct gdbarch_info inf
> *** 2116,2123 ****
> set_gdbarch_frame_chain (gdbarch, sh_frame_chain);
> set_gdbarch_frame_chain_valid (gdbarch, generic_file_frame_chain_valid);
> set_gdbarch_frame_saved_pc (gdbarch, sh_frame_saved_pc);
> ! set_gdbarch_frame_args_address (gdbarch, sh_frame_args_address);
> ! set_gdbarch_frame_locals_address (gdbarch, sh_frame_locals_address);
> set_gdbarch_saved_pc_after_call (gdbarch, sh_saved_pc_after_call);
> set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
> set_gdbarch_believe_pcc_promotion (gdbarch, 1);
> --- 2104,2111 ----
> set_gdbarch_frame_chain (gdbarch, sh_frame_chain);
> set_gdbarch_frame_chain_valid (gdbarch, generic_file_frame_chain_valid);
> set_gdbarch_frame_saved_pc (gdbarch, sh_frame_saved_pc);
> ! set_gdbarch_frame_args_address (gdbarch, default_frame_address);
> ! set_gdbarch_frame_locals_address (gdbarch, default_frame_address);
> set_gdbarch_saved_pc_after_call (gdbarch, sh_saved_pc_after_call);
> set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
> set_gdbarch_believe_pcc_promotion (gdbarch, 1);
> Index: sparc-tdep.c
> ===================================================================
> RCS file: /cvs/src/src/gdb/sparc-tdep.c,v
> retrieving revision 1.9
> diff -c -3 -p -r1.9 sparc-tdep.c
> *** sparc-tdep.c 2000/10/24 20:05:35 1.9
> --- sparc-tdep.c 2000/12/20 23:44:24
> *************** sparc_frame_init_saved_regs (struct fram
> *** 2810,2823 ****
> { /* no-op */
> }
>
> - /* The frame address: stored in the 'frame' field of the frame_info. */
> -
> - static CORE_ADDR
> - sparc_frame_address (struct frame_info *fi)
> - {
> - return fi->frame;
> - }
> -
> /* gdbarch fix call dummy:
> All this function does is rearrange the arguments before calling
> sparc_fix_call_dummy (which does the real work). */
> --- 2810,2815 ----
> *************** sparc_gdbarch_init (struct gdbarch_info
> *** 2957,2966 ****
> set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
> set_gdbarch_fp_regnum (gdbarch, SPARC_FP_REGNUM);
> set_gdbarch_fp0_regnum (gdbarch, SPARC_FP0_REGNUM);
> ! set_gdbarch_frame_args_address (gdbarch, sparc_frame_address);
> set_gdbarch_frame_chain (gdbarch, sparc_frame_chain);
> set_gdbarch_frame_init_saved_regs (gdbarch, sparc_frame_init_saved_regs);
> ! set_gdbarch_frame_locals_address (gdbarch, sparc_frame_address);
> set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
> set_gdbarch_frame_saved_pc (gdbarch, sparc_frame_saved_pc);
> set_gdbarch_frameless_function_invocation (gdbarch,
> --- 2949,2958 ----
> set_gdbarch_float_bit (gdbarch, 4 * TARGET_CHAR_BIT);
> set_gdbarch_fp_regnum (gdbarch, SPARC_FP_REGNUM);
> set_gdbarch_fp0_regnum (gdbarch, SPARC_FP0_REGNUM);
> ! set_gdbarch_frame_args_address (gdbarch, default_frame_address);
> set_gdbarch_frame_chain (gdbarch, sparc_frame_chain);
> set_gdbarch_frame_init_saved_regs (gdbarch, sparc_frame_init_saved_regs);
> ! set_gdbarch_frame_locals_address (gdbarch, default_frame_address);
> set_gdbarch_frame_num_args (gdbarch, frame_num_args_unknown);
> set_gdbarch_frame_saved_pc (gdbarch, sparc_frame_saved_pc);
> set_gdbarch_frameless_function_invocation (gdbarch,
From msnyder@cygnus.com Tue Jan 02 12:32:00 2001
From: Michael Snyder <msnyder@cygnus.com>
To: gdb-patches@sources.redhat.com
Subject: [PATCH] fix comment typo in sparc-tdep.c
Date: Tue, 02 Jan 2001 12:32:00 -0000
Message-id: <200101022032.MAA10139@cleaver.cygnus.com>
X-SW-Source: 2001-01/msg00005.html
Content-length: 951

2001-01-02 Michael Snyder <msnyder@cleaver.cygnus.com>

* sparc-tdep.c (sparc-frame-chain): Fix typo in comment.

Index: sparc-tdep.c
===================================================================
RCS file: /cvs/src/src/gdb/sparc-tdep.c,v
retrieving revision 1.10
diff -c -3 -p -r1.10 sparc-tdep.c
*** sparc-tdep.c 2001/01/02 20:21:53 1.10
--- sparc-tdep.c 2001/01/02 20:31:44
*************** CORE_ADDR
*** 425,431 ****
sparc_frame_chain (struct frame_info *frame)
{
/* Value that will cause FRAME_CHAIN_VALID to not worry about the chain
! value. If it realy is zero, we detect it later in
sparc_init_prev_frame. */
return (CORE_ADDR) 1;
}
--- 425,431 ----
sparc_frame_chain (struct frame_info *frame)
{
/* Value that will cause FRAME_CHAIN_VALID to not worry about the chain
! value. If it really is zero, we detect it later in
sparc_init_prev_frame. */
return (CORE_ADDR) 1;
}
From msnyder@cygnus.com Tue Jan 02 12:36:00 2001
From: Michael Snyder <msnyder@cygnus.com>
To: gdb-patches@sources.redhat.com
Subject: [PATCH] Update copyright notice.
Date: Tue, 02 Jan 2001 12:36:00 -0000
Message-id: <200101022036.MAA10155@cleaver.cygnus.com>
X-SW-Source: 2001-01/msg00006.html
Content-length: 764

Index: sparc-tdep.c
===================================================================
RCS file: /cvs/src/src/gdb/sparc-tdep.c,v
retrieving revision 1.11
diff -c -3 -p -r1.11 sparc-tdep.c
*** sparc-tdep.c 2001/01/02 20:32:50 1.11
--- sparc-tdep.c 2001/01/02 20:36:04
***************
*** 1,6 ****
/* Target-dependent code for the SPARC for GDB, the GNU debugger.
! Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997
! Free Software Foundation, Inc.

This file is part of GDB.

--- 1,6 ----
/* Target-dependent code for the SPARC for GDB, the GNU debugger.
! Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
! 1998, 1999, 2000, 2001 Free Software Foundation, Inc.

This file is part of GDB.

From fche@redhat.com Tue Jan 02 13:31:00 2001
From: fche@redhat.com (Frank Ch. Eigler)
To: Michael Snyder <msnyder@cygnus.com>
Cc: gdb-patches@sources.redhat.com
Subject: Re: [PATCH] Update copyright notice.
Date: Tue, 02 Jan 2001 13:31:00 -0000
Message-id: <o5ofxptzcp.fsf@toenail.toronto.redhat.com>
References: <200101022036.MAA10155@cleaver.cygnus.com>
X-SW-Source: 2001-01/msg00007.html
Content-length: 326

msnyder wrote:

: ! Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
: ! 1998, 1999, 2000, 2001 Free Software Foundation, Inc.

Will the decree that requires this eyesore instead of the equivalent

# ! Copyright 1986-1987, 1989, 1991-2001 Free Software Foundation, Inc.

ever be lifted?

- FChE
From msnyder@redhat.com Tue Jan 02 15:52:00 2001
From: Michael Snyder <msnyder@redhat.com>
To: Elena Zannoni <ezannoni@cygnus.com>
Cc: gdb-patches@sources.redhat.com, ezannoni@redhat.com
Subject: Re: [RFA]: Fix for sh function return value
Date: Tue, 02 Jan 2001 15:52:00 -0000
Message-id: <3A52699E.2C3D@redhat.com>
References: <3A3E4B9A.4B4CA060@redhat.com> <14910.21011.584602.600871@kwikemart.cygnus.com>
X-SW-Source: 2001-01/msg00008.html
Content-length: 2515

Elena Zannoni wrote:
>
> Thanks Michael.
> Go ahead.

Committed.

>
> Elena
>
> Michael Snyder writes:
> > This will fix two testsuite failures in return2.exp, wherein the
> > function's return type is smaller than the register size.2000-12-18 Michael Snyder <msnyder@mvstp600e.cygnus.com>
> >
> > * sh-tdep.c (sh_extract_return_value): Allow for small return type.
> > (sh_sh4_extract_return_value): Call sh_extract_return_value
> > for non-float types.
> >
> > Index: sh-tdep.c
> > ===================================================================
> > RCS file: /cvs/cvsfiles/devo/gdb/sh-tdep.c,v
> > retrieving revision 2.71
> > diff -c -3 -p -r2.71 sh-tdep.c
> > *** sh-tdep.c 2000/12/18 05:32:59 2.71
> > --- sh-tdep.c 2000/12/18 17:33:32
> > *************** sh_extract_return_value (struct type *ty
> > *** 1246,1253 ****
> > static void
> > sh_default_store_return_value (struct type *type, char *valbuf)
> > {
> > ! write_register_bytes (REGISTER_BYTE (0),
> > ! valbuf, TYPE_LENGTH (type));
> > }
> >
> > static void
> > --- 1246,1263 ----
> > static void
> > sh_default_store_return_value (struct type *type, char *valbuf)
> > {
> > ! char buf[32]; /* more than enough... */
> > !
> > ! if (TYPE_LENGTH (type) < REGISTER_RAW_SIZE (0))
> > ! {
> > ! /* Add leading zeros to the value. */
> > ! memset (buf, 0, REGISTER_RAW_SIZE (0));
> > ! memcpy (buf + REGISTER_RAW_SIZE (0) - TYPE_LENGTH (type),
> > ! valbuf, TYPE_LENGTH (type));
> > ! write_register_bytes (REGISTER_BYTE (0), buf, REGISTER_RAW_SIZE (0));
> > ! }
> > ! else
> > ! write_register_bytes (REGISTER_BYTE (0), valbuf, TYPE_LENGTH (type));
> > }
> >
> > static void
> > *************** sh3e_sh4_store_return_value (struct type
> > *** 1257,1264 ****
> > write_register_bytes (REGISTER_BYTE (FP0_REGNUM),
> > valbuf, TYPE_LENGTH (type));
> > else
> > ! write_register_bytes (REGISTER_BYTE (0),
> > ! valbuf, TYPE_LENGTH (type));
> > }
> >
> > /* Print the registers in a form similar to the E7000 */
> > --- 1267,1273 ----
> > write_register_bytes (REGISTER_BYTE (FP0_REGNUM),
> > valbuf, TYPE_LENGTH (type));
> > else
> > ! sh_default_store_return_value (type, valbuf);
> > }
> >
> > /* Print the registers in a form similar to the E7000 */
From fnasser@redhat.com Tue Jan 02 21:45:00 2001
From: Fernando Nasser <fnasser@redhat.com>
To: gdb-patches@sources.redhat.com
Subject: Some new files in the gdbtk/library subdirectories; use cvs -d
Date: Tue, 02 Jan 2001 21:45:00 -0000
Message-id: <3A52BC39.D8342633@redhat.com>
X-SW-Source: 2001-01/msg00009.html
Content-length: 354

In case you do not follow the GUI list, there are a few new files in the
gdb/gdbtk/library subdirectory.

If you use the Insight GUI, please make sure you use cvs -d in that
directory to grab the new files.

--
Fernando Nasser
Red Hat Canada Ltd. E-Mail: fnasser@redhat.com
2323 Yonge Street, Suite #300
Toronto, Ontario M4P 2C9
From spolk@redhat.com Wed Jan 03 11:38:00 2001
From: Syd Polk <spolk@redhat.com>
To: Fernando Nasser <fnasser@redhat.com>, gdb-patches@sources.redhat.com
Subject: Re: Some new files in the gdbtk/library subdirectories; use cvs -d
Date: Wed, 03 Jan 2001 11:38:00 -0000
Message-id: <4.2.0.58.20010103113732.019d2b10@pop.cygnus.com>
References: <3A52BC39.D8342633@redhat.com>
X-SW-Source: 2001-01/msg00010.html
Content-length: 473

At 12:44 AM 1/3/01 -0500, Fernando Nasser wrote:
>In case you do not follow the GUI list, there are a few new files in the
>gdb/gdbtk/library subdirectory.
>
>If you use the Insight GUI, please make sure you use cvs -d in that
>directory to grab the new files.

This should only be necessary if there are new directories.

cvs update

should get all new files in existing directories.

Syd Polk spolk@redhat.com
Engineering Manager +1 415 777 9810 x 241
Red Hat, Inc.