Re: ping^2: [patchv2] Fix 100x slowdown regression on DWZ files

[Doug Evans <dje@google.com>]

Jan Kratochvil writes:
 > On Thu, 02 Oct 2014 17:56:53 +0200, Jan Kratochvil wrote:
 > 
 > On Thu, 02 Oct 2014 01:51:38 +0200, Doug Evans wrote:
 > > I tested this patch with --target_board=dwarf4-gdb-index
 > > and got a failure in m-static.exp:
 > 
 > That is particularly with -fdebug-types-section.
 > 
 > 
 > > Type units read the line table in a separate path,
 > 
 > OK, therefore I dropped that separate struct dwarf2_lineinfo
 > and reused struct line_header instead.
 > 
 > 
 > > OTOH, I do want to avoid any confusion that this patch may inadvertently
 > > introduce. For example, IIUC with your patch as is,
 > > if we read a partial_unit first, before a compile_unit
 > > that has the same stmt_list value, we'll do more processing in
 > > dwarf_decode_lines than we really need to since we only need a file
 > > number to symtab mapping. And if we later read in a compile_unit
 > > with the same stmt_value we'll call dwarf_decode_lines again,
 > > and this time we need the pc/line mapping it computes.
 > > Whereas if we process these in the opposite order we'll only call
 > > dwarf_decode_lines once. I'm sure this will be confusing at first
 > > to some later developer going through this code.
 > > [I could be missing something of course, and I'm happy for any corrections.]
 > 
 > Implemented (omitting some story why I did not include it before).
 > 
 > 
 > > The code that processes stmt_list for type_units is in setup_type_unit_groups.
 > > Note that this code goes to the trouble of re-initializing the buildsym
 > > machinery (see the calls to restart_symtab in dwarf2read.c) when we process
 > > the second and subsequent type units that share a stmt_list value.
 > > This is something that used to be done before your patch and will no
 > > longer be done with your patch (since if we get a cache hit we exit).
 > > It may be that the type_unit support is doing this unnecessarily,
 > > which would be great because we can then simplify it.
 > 
 > I hope this patch should no longer break -fdebug-types-section.
 > If it additionally enables some future optimization for -fdebug-types-section
 > the better.
 > 
 > 
 > >  > +  /* Offset of line number information in .debug_line section.  */
 > >  > +  sect_offset offset;
 > >  > +  unsigned offset_in_dwz : 1;
 > > 
 > > IWBN to document why offset_in_dwz is here.
 > > It's not obvious why it's needed.
 > +
 > On Thu, 02 Oct 2014 01:57:03 +0200, Doug Evans wrote:
 > > Ah, I guess the offset_in_dwz flag will ensure dwarf_decode_lines gets called
 > > twice regardless of order.  But is that the only reason for the flag?
 > 
 > I have added there now:
 > +  /* OFFSET is for struct dwz_file associated with dwarf2_per_objfile.  */
 > 
 > If one removes it regressions really happen.  What happens is that this
 > line_header_hash (former lineinfo_hash) is in struct dwarf2_per_objfile which
 > is common for both objfile and its objfile.dwz (that one is normally in
 > /usr/lib/debug/.dwz/ - common for multiple objfiles).  And there are two
 > different DIEs at offset 0xb - one in objfile and one in objfile.dwz - which
 > would match single line_header if offset_in_dwz was not there.
 > 
 > Also existing dwarf2read.c code usually transfers "dwz flag" together with DIE
 > offset, such as:
 > 	dwarf2_find_containing_comp_unit (sect_offset offset,
 > 					  unsigned int offset_in_dwz,
 > 					  struct objfile *objfile)
 > This reminds me - why doesn't similar ambiguity happen also for dwp_file?
 > I am unfortunately not much aware of the dwp implementation details.
 > 
 > 
 > >  > -      struct line_header *line_header
 > >  > -	= dwarf_decode_line_header (line_offset, cu);
 > >  > +      dwarf2_per_objfile->lineinfo_hash =
 > > 
 > > As much as I prefer "=" going here, convention says to put it on the
 > > next line.
 > 
 > I have changed it but this was just blind copy from existing line 21818.
 > 
 > 
 > >  > +	htab_create_alloc_ex (127, dwarf2_lineinfo_hash, dwarf2_lineinfo_eq,
 > > 
 > > I don't have any data, but 127 seems high.
 > 
 > I have not changed it but this was just blind copy from existing line 21818.
 > 
 > 
 > > I wouldn't change it, I just wanted to ask if you have any data
 > > guiding this choice.
 > 
 > Tuning some constants really makes no sense when GDB has missing + insanely
 > complicated data structures and in consequence GDB is using inappropriate data
 > structures with bad algorithmic complexity.  One needs to switch GDB to C++
 > and its STL before one can start talking about data structures performance.
 > 
 > 
 > No regressions on {x86_64,x86_64-m32,i686}-fedora20-linux-gnu in DWZ mode and
 > in -fdebug-types-section mode.
 > 
 > 
 > Thanks,
 > Jan
 > gdb/
 > 2014-10-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
 > 
 > 	Fix 100x slowdown regression on DWZ files.
 > 	* dwarf2read.c (struct dwarf2_per_objfile): Add line_header_hash.
 > 	(struct line_header): Add offset and offset_in_dwz.
 > 	(dwarf_decode_lines): Add parameter decode_mapping to the declaration.
 > 	(free_line_header_voidp): New declaration.
 > 	(line_header_hash, line_header_eq): New functions.
 > 	(dwarf2_build_include_psymtabs): Update dwarf_decode_lines caller.
 > 	(handle_DW_AT_stmt_list): Use dwarf2_per_objfile->line_header_hash.
 > 	(free_line_header_voidp): New function.
 > 	(dwarf_decode_line_header): Initialize offset and offset_in_dwz.
 > 	(dwarf_decode_lines): New parameter decode_mapping, use it.

Hi.

Sorry for the delay.

A few comments inline.

@@ -8994,20 +9028,33 @@ static void
 handle_DW_AT_stmt_list (struct die_info *die, struct dwarf2_cu *cu,
 			const char *comp_dir, CORE_ADDR lowpc) /* ARI: editCase function */
 {
+  struct objfile *objfile = dwarf2_per_objfile->objfile;
   struct attribute *attr;
+  unsigned int line_offset;
+  struct line_header *line_header, line_header_local;
+  unsigned u;
+  void **slot;
+  int decode_mapping;
 
   gdb_assert (! cu->per_cu->is_debug_types);
 
   attr = dwarf2_attr (die, DW_AT_stmt_list, cu);
-  if (attr)
+  if (attr == NULL)
+    return;
+
+  line_offset = DW_UNSND (attr);
+
+  if (dwarf2_per_objfile->line_header_hash == NULL)
     {
-      unsigned int line_offset = DW_UNSND (attr);
-      struct line_header *line_header
-	= dwarf_decode_line_header (line_offset, cu);
+      dwarf2_per_objfile->line_header_hash
+	= htab_create_alloc_ex (127, line_header_hash, line_header_eq,
+				free_line_header_voidp,
+				&objfile->objfile_obstack,
+				hashtab_obstack_allocate,
+				dummy_obstack_deallocate);
+    }
 
-      if (line_header)
-	{
-	  cu->line_header = line_header;
-	  make_cleanup (free_cu_line_header, cu);
-	  dwarf_decode_lines (line_header, comp_dir, cu, NULL, lowpc);
-	}
+  line_header_local.offset.sect_off = line_offset;
+  line_header_local.offset_in_dwz = cu->per_cu->is_dwz;
+  slot = htab_find_slot (dwarf2_per_objfile->line_header_hash,
+			 &line_header_local, NO_INSERT);

Do hashtables support calling htab_find_slot with INSERT but then
not assigning the slot a value if it was empty?
I could be wrong but I think it does.
If so, we can remove one call to htab_find_slot here.

+
+  /* For DW_TAG_compile_unit we need info like symtab::linetable which
+     is not present in *SLOT.  */
+  if (die->tag == DW_TAG_partial_unit && slot != NULL)
+    {
+      gdb_assert (*slot != NULL);
+      cu->line_header = *slot;
+      return;
+    }
+
+  line_header = dwarf_decode_line_header (line_offset, cu);
+  if (line_header == NULL)
+    return;
+  cu->line_header = line_header;
+
+  slot = htab_find_slot (dwarf2_per_objfile->line_header_hash,
+			 &line_header_local, INSERT);
+  gdb_assert (slot != NULL);
+  if (*slot == NULL)
+    *slot = line_header;
+  else
+    {
+      gdb_assert (die->tag != DW_TAG_partial_unit);
+      make_cleanup (free_cu_line_header, cu);
     }
+  decode_mapping = (die->tag != DW_TAG_partial_unit);
+  dwarf_decode_lines (line_header, comp_dir, cu, NULL, lowpc,
+		      decode_mapping);

This is a bit confusing to follow.
If the slot was empty we save line_header in it (and don't record a cleanup),
but if wasn't empty we don't update *slot but do record a cleanup.
Presumably there's a reason, but it's hard to follow.
It would be simpler to just free any previous entry and conditionally
update *slot.  Is there a reason to not do that?
Can you add a clarifying comment?

Plus I'm worried about increased memory usage in the non-dwz case.
IIUC, the non-dwz case will always have *slot == NULL, and thus we'll
always be saving line header entries we'll never need again.

Also, it looks like line_header_hash (and its entries) aren't
deleted when the objfile goes away.  Missing call to htab_delete.

 }
 
 /* Process DW_TAG_compile_unit or DW_TAG_partial_unit.  */

....

@@ -17665,17 +17752,22 @@ dwarf_decode_lines_1 (struct line_header *lh, struct dwarf2_cu *cu,
    E.g. expand_line_sal requires this when finding psymtabs to expand.
    A good testcase for this is mb-inline.exp.
 
-   LOWPC is the lowest address in CU (or 0 if not known).  */
+   LOWPC is the lowest address in CU (or 0 if not known).
+
+   Boolean DECODE_MAPPING specifies we need to fully decode .debug_line
+   for its PC<->lines mapping information.  Otherwise only filenames

*the filenames

+   tables is read in.  */

s/tables/table/
 
 static void
 dwarf_decode_lines (struct line_header *lh, const char *comp_dir,
 		    struct dwarf2_cu *cu, struct partial_symtab *pst,
-		    CORE_ADDR lowpc)
+		    CORE_ADDR lowpc, int decode_mapping)
 {
   struct objfile *objfile = cu->objfile;
   const int decode_for_pst_p = (pst != NULL);
 
-  dwarf_decode_lines_1 (lh, cu, decode_for_pst_p, lowpc);
+  if (decode_mapping)
+    dwarf_decode_lines_1 (lh, cu, decode_for_pst_p, lowpc);
 
   if (decode_for_pst_p)
     {