From: Sergio Durigan Junior <sergiodj@sergiodj.net>
To: GDB Patches <gdb-patches@sourceware.org>
Cc: Simon Marchi <simon.marchi@polymtl.ca>,
doko@debian.org, Michael Jeanson <mjeanson@debian.org>,
Sergio Durigan Junior <sergiodj@sergiodj.net>
Subject: [PATCH] Remove support for the Common Trace Format (CTF)
Date: Sat, 9 May 2026 22:28:13 -0400 [thread overview]
Message-ID: <20260510022813.2221582-1-sergiodj@sergiodj.net> (raw)
Hi there,
The Debian maintainer of babeltrace (Michael, in CC) is working
towards removing the version 1 package from the archive in favour of
version 2. This makes sense as version 1 is unsupported and projects
should move to version 2.
While digging through the archives I found PR buid/27142 (from
Matthias, also in Cc) which was filed 5 years ago requesting GDB to
support babeltrace v2. At the time Simon started a thread on gdb@
suggesting that we should actually remove the support for CTF (Common
Trace Format) altogether, since it's a niche feature (CTF) within a
niche feature (tracepoints) and apparently GDB itself records CTF data
in an unconventional way that might break other tools. You can see
the thread here:
https://inbox.sourceware.org/gdb/3fb1fbb6-836a-0e39-73a9-ef721630da88@polymtl.ca/
Long story short, the consensus seems to be that CTF support is ripe
to be removed, so that's what this patch does. I think I covered all
places that referred to either CTF or babeltrace; I recompiled GDB
here and things are still working as expected. I ran the tests I
touched and there are some failures, but they're unrelated to CTF and
I could reproduce them in a pristine tree as well.
I've been a bit distant from the community so I don't know whether we
have a specific procedure to remove features from GDB. I remember
that when we removed support for an architecture, we used to deprecate
it in release N and then proceed with the removal on release N+1. Not
sure if this is applicable here, but let me know.
Either way, I intend to disable support for babeltrace on Debian's GDB
soon.
WDYT?
Signed-off-by: Sergio Durigan Junior <sergiodj@sergiodj.net>
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27142
---
gdb/Makefile.in | 10 +-
gdb/NEWS | 22 +-
gdb/configure.ac | 43 -
gdb/doc/gdb.texinfo | 48 +-
gdb/mi/mi-main.c | 12 +-
gdb/testsuite/gdb.base/completion.exp | 10 -
gdb/testsuite/gdb.trace/actions.exp | 22 -
.../gdb.trace/mi-trace-frame-collected.exp | 23 -
.../gdb.trace/mi-trace-unavailable.exp | 23 -
gdb/testsuite/gdb.trace/report.exp | 14 -
gdb/testsuite/gdb.trace/tstatus.exp | 14 -
gdb/testsuite/gdb.trace/tsv.exp | 12 -
gdb/testsuite/gdb.trace/unavailable.exp | 22 -
gdb/testsuite/gdb.trace/while-stepping.exp | 22 -
gdb/top.c | 10 -
gdb/tracectf.c | 1728 -----------------
gdb/tracectf.h | 25 -
gdb/tracefile.c | 25 +-
gdb/tracepoint.h | 2 -
19 files changed, 31 insertions(+), 2056 deletions(-)
delete mode 100644 gdb/tracectf.c
delete mode 100644 gdb/tracectf.h
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index e38ba95eebd..a0c11f5eb57 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -197,10 +197,6 @@ LIBEXPAT = @LIBEXPAT@
# Where is lzma? This will be empty if lzma was not available.
LIBLZMA = @LIBLZMA@
-# Where is libbabeltrace? This will be empty if libbabeltrace was not
-# available.
-LIBBABELTRACE = @LIBBABELTRACE@
-
# Where is libxxhash? This will be empty if libxxhash was not
# available.
LIBXXHASH = @LIBXXHASH@
@@ -677,10 +673,10 @@ CLIBS = $(SIM) $(READLINE) $(OPCODES) $(LIBCTF) $(BFD) $(ZLIB) $(ZSTD_LIBS) \
$(LIBSUPPORT) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
$(XM_CLIBS) $(GDBTKLIBS) $(LIBBACKTRACE_LIB) \
@LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ $(AMD_DBGAPI_LIBS) \
- $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \
+ $(LIBEXPAT) $(LIBLZMA) $(LIBIPT) \
$(WIN32LIBS) $(LIBGNU) $(LIBGNU_EXTRA_LIBS) $(LIBICONV) \
$(GMPLIBS) $(SRCHIGH_LIBS) $(LIBXXHASH) $(PTHREAD_LIBS) \
- $(DEBUGINFOD_LIBS) $(LIBBABELTRACE_LIB)
+ $(DEBUGINFOD_LIBS)
CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) $(CTF_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) \
$(LIBSUPPORT)
@@ -1208,7 +1204,6 @@ COMMON_SFILES = \
thread-iter.c \
tid-parse.c \
top.c \
- tracectf.c \
tracefile.c \
tracefile-tfile.c \
tracepoint.c \
@@ -1697,7 +1692,6 @@ HFILES_NO_SRCDIR = \
tid-parse.h \
tilegx-tdep.h \
top.h \
- tracectf.h \
tracefile.h \
tracepoint.h \
trad-frame.h \
diff --git a/gdb/NEWS b/gdb/NEWS
index 480e1854002..48a80856aa1 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -3,6 +3,9 @@
*** Changes since GDB 17
+* Support for the Common Trace Format (CTF) has been removed. GDB now
+ saves trace information exclusively in its own "tfile" format.
+
* Support for .gdb_index sections with version less than 7 has been
removed.
@@ -78,6 +81,12 @@
* The Windows native target now supports non-stop mode. This feature
requires Windows 10 or later.
+* Configure changes
+
+** --with-babeltrace has been removed. The babeltrace library was
+ only used to help GDB parse Common Trace Format (CTF) data. The
+ support for CTF has also been removed.
+
* New targets
GNU/Linux/MicroBlaze (gdbserver) microblazeel-*linux*
@@ -112,7 +121,8 @@ show debug gnu-ifunc
set debug ctf on|off
show debug ctf
- Turn on or off debug messages about CTF reading.
+ Turn on or off debug messages about Compact C Type Format (CTF)
+ reading.
set progress-bars enabled on|off
show progress-bars enabled
@@ -130,8 +140,15 @@ disable skip
These are new aliases for 'skip delete', 'skip enable', and 'skip
disable' respectively.
+* MI changes
+
+** The "-trace-save" command no longer supports the "-ctf" flag.
+
* Changed commands
+tsave
+ This command no longer supports the "-ctf" flag.
+
maintenance info program-spaces
This command no longer displays the core file name.
@@ -147,6 +164,9 @@ New command class for help
* Removed commands
+target ctf
+ Support for the Common Trace Format (CTF) has been removed.
+
maint check psymtabs
maint info psymtabs
maint print psymbols
diff --git a/gdb/configure.ac b/gdb/configure.ac
index 56ab86d9356..2f05daf614f 100644
--- a/gdb/configure.ac
+++ b/gdb/configure.ac
@@ -2332,49 +2332,6 @@ fi
AC_SUBST(LIBBACKTRACE_INC)
AC_SUBST(LIBBACKTRACE_LIB)
-# Check for babeltrace and babeltrace-ctf
-AC_ARG_WITH(babeltrace,
- AS_HELP_STRING([--with-babeltrace], [include babeltrace support (auto/yes/no)]),
- [], [with_babeltrace=auto])
-AC_MSG_CHECKING([whether to use babeltrace])
-AC_MSG_RESULT([$with_babeltrace])
-
-if test "x$with_babeltrace" = "xno"; then
- AC_MSG_WARN([babeltrace support disabled; GDB is unable to read CTF data.])
-else
- # Append -Werror to CFLAGS so that configure can catch the warning
- # "assignment from incompatible pointer type", which is related to
- # the babeltrace change from 1.0.3 to 1.1.0. Babeltrace 1.1.0 works
- # in GDB, while babeltrace 1.0.3 is broken.
- # AC_LIB_HAVE_LINKFLAGS may modify CPPFLAGS in it, so it should be
- # safe to save and restore CFLAGS here.
- saved_CFLAGS=$CFLAGS
- CFLAGS="$CFLAGS -Werror"
- AC_LIB_HAVE_LINKFLAGS([babeltrace], [babeltrace-ctf],
- [#include <babeltrace/babeltrace.h>
- #include <babeltrace/ctf/events.h>
- #include <babeltrace/ctf/iterator.h>],
- [struct bt_iter_pos *pos = bt_iter_get_pos (bt_ctf_get_iter (NULL));
- struct bt_ctf_event *event = NULL;
- const struct bt_definition *scope;
-
- pos->type = BT_SEEK_BEGIN;
- bt_iter_set_pos (bt_ctf_get_iter (NULL), pos);
- scope = bt_ctf_get_top_level_scope (event,
- BT_STREAM_EVENT_HEADER);
- bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "id"));
- ])
- CFLAGS=$saved_CFLAGS
-
- if test "$HAVE_LIBBABELTRACE" != yes; then
- if test "$with_babeltrace" = yes; then
- AC_MSG_ERROR([babeltrace is missing or unusable])
- else
- AC_MSG_WARN([babeltrace is missing or unusable; GDB is unable to read CTF data.])
- fi
- fi
-fi
-
GCC_ENABLE([libctf], [yes], [], [Handle .ctf type-info sections])
if test "${enable_libctf}" = yes; then
AC_DEFINE(ENABLE_LIBCTF, 1, [Handle .ctf type-info sections])
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 68e760699bc..40f381f812d 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -16547,7 +16547,7 @@ of trace data, via the @code{target tfile} command.
@kindex tsave
@item tsave [ -r ] @var{filename}
-@itemx tsave [-ctf] @var{dirname}
+@itemx tsave @var{dirname}
Save the trace data to @var{filename}. By default, this command
assumes that @var{filename} refers to the host filesystem, so if
necessary @value{GDBN} will copy raw trace data up from the target and
@@ -16556,44 +16556,6 @@ optional argument @code{-r} (``remote'') to direct the target to save
the data directly into @var{filename} in its own filesystem, which may be
more efficient if the trace buffer is very large. (Note, however, that
@code{target tfile} can only read from files accessible to the host.)
-By default, this command will save trace frame in tfile format.
-You can supply the optional argument @code{-ctf} to save data in CTF
-format. The @dfn{Common Trace Format} (CTF) is proposed as a trace format
-that can be shared by multiple debugging and tracing tools. Please go to
-@indicateurl{http://www.efficios.com/ctf} to get more information.
-
-@kindex target tfile
-@kindex tfile
-@kindex target ctf
-@kindex ctf
-@item target tfile @var{filename}
-@itemx target ctf @var{dirname}
-Use the file named @var{filename} or directory named @var{dirname} as
-a source of trace data. Commands that examine data work as they do with
-a live target, but it is not possible to run any new trace experiments.
-@code{tstatus} will report the state of the trace run at the moment
-the data was saved, as well as the current trace frame you are examining.
-Both @var{filename} and @var{dirname} must be on a filesystem accessible to
-the host.
-
-The @var{filename} and @var{dirname} arguments supports escaping and
-quoting, see @ref{Filename Arguments,,Filenames As Command Arguments}.
-
-@smallexample
-(@value{GDBP}) target ctf ctf.ctf
-(@value{GDBP}) tfind
-Found trace frame 0, tracepoint 2
-39 ++a; /* set tracepoint 1 here */
-(@value{GDBP}) tdump
-Data collected at tracepoint 2, trace frame 0:
-i = 0
-a = 0
-b = 1 '\001'
-c = @{"123", "456", "789", "123", "456", "789"@}
-d = @{@{@{a = 1, b = 2@}, @{a = 3, b = 4@}@}, @{@{a = 5, b = 6@}, @{a = 7, b = 8@}@}@}
-(@value{GDBP}) p b
-$1 = 1
-@end smallexample
@end table
@@ -37487,7 +37449,7 @@ body=[variable=@{name="$trace_timestamp",initial="0"@}
@subsubheading Synopsis
@smallexample
- -trace-save [ -r ] [ -ctf ] @var{filename}
+ -trace-save [ -r ] @var{filename}
@end smallexample
Saves the collected trace data to @var{filename}. Without the
@@ -37495,10 +37457,6 @@ Saves the collected trace data to @var{filename}. Without the
in a local file. With the @samp{-r} option the target is asked
to perform the save.
-By default, this command will save the trace in the tfile format. You can
-supply the optional @samp{-ctf} argument to save it the CTF format. See
-@ref{Trace Files} for more information about CTF.
-
@subsubheading @value{GDBN} Command
The corresponding @value{GDBN} command is @samp{tsave}.
@@ -41411,7 +41369,7 @@ distribution; if it is not, you can get the latest version from
@url{http://zlib.net}.
@c FIXME: what about other optional libraries: debuginfod, zstd,
-@c libipt, babeltrace, xxhash, source-highlight?
+@c libipt, xxhash, source-highlight?
@end table
@node Running Configure
diff --git a/gdb/mi/mi-main.c b/gdb/mi/mi-main.c
index 4dd4a7f9a6c..52e642e1464 100644
--- a/gdb/mi/mi-main.c
+++ b/gdb/mi/mi-main.c
@@ -2395,19 +2395,17 @@ void
mi_cmd_trace_save (const char *command, const char *const *argv, int argc)
{
int target_saves = 0;
- int generate_ctf = 0;
const char *filename;
int oind = 0;
const char *oarg;
enum opt
{
- TARGET_SAVE_OPT, CTF_OPT
+ TARGET_SAVE_OPT,
};
static const struct mi_opt opts[] =
{
{"r", TARGET_SAVE_OPT, 0},
- {"ctf", CTF_OPT, 0},
{ 0, 0, 0 }
};
@@ -2423,9 +2421,6 @@ mi_cmd_trace_save (const char *command, const char *const *argv, int argc)
case TARGET_SAVE_OPT:
target_saves = 1;
break;
- case CTF_OPT:
- generate_ctf = 1;
- break;
}
}
@@ -2435,10 +2430,7 @@ mi_cmd_trace_save (const char *command, const char *const *argv, int argc)
filename = argv[oind];
- if (generate_ctf)
- trace_save_ctf (filename, target_saves);
- else
- trace_save_tfile (filename, target_saves);
+ trace_save_tfile (filename, target_saves);
}
void
diff --git a/gdb/testsuite/gdb.base/completion.exp b/gdb/testsuite/gdb.base/completion.exp
index e7407e75ee0..44cf649d5b6 100644
--- a/gdb/testsuite/gdb.base/completion.exp
+++ b/gdb/testsuite/gdb.base/completion.exp
@@ -90,16 +90,6 @@ gdb_test "complete set cp-abi aut" "set cp-abi auto"
# Test that completion of commands 'target FOO' works well.
set targets [list "core" "tfile" "exec"]
-# Test that completion of command 'target ctf' if GDB supports ctf
-# target.
-gdb_test_multiple "target ctf" "" {
- -re "Undefined target command: \"ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
- }
- -re "No CTF directory specified.*\r\n$gdb_prompt $" {
- lappend targets "ctf"
- }
-}
-
# Test artifacts are put in different locations depending on test
# is a parallel run or not. Firstly check file exists, and then
# do the test on file completion.
diff --git a/gdb/testsuite/gdb.trace/actions.exp b/gdb/testsuite/gdb.trace/actions.exp
index 07c5de664da..8a8a08d0f9e 100644
--- a/gdb/testsuite/gdb.trace/actions.exp
+++ b/gdb/testsuite/gdb.trace/actions.exp
@@ -318,9 +318,6 @@ set tracefile [standard_output_file ${testfile}]
gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'\." \
"tsave ${testfile}.tf"
-gdb_test "tsave -ctf ${tracefile}.ctf" \
- "Trace data saved to directory '${tracefile}.ctf'\\." \
- "save ctf trace file"
# Restart GDB and read the trace data in tfile target.
clean_restart
@@ -328,22 +325,3 @@ gdb_file_cmd $binfile
gdb_test "target tfile ${tracefile}.tf" ".*" \
"change to tfile target"
check_tracepoint "tfile"
-
-# Try to read ctf data if GDB supports.
-set gdb_can_read_ctf_data 0
-gdb_test_multiple "target ctf" "" {
- -re "Undefined target command: \"ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
- set gdb_can_read_ctf_data 0
- }
- -re "No CTF directory specified.*\r\n$gdb_prompt $" {
- set gdb_can_read_ctf_data 1
- }
-}
-
-if { $gdb_can_read_ctf_data } {
- clean_restart
- gdb_file_cmd $binfile
- gdb_test "target ctf ${tracefile}.ctf" ".*" \
- "change to ctf target"
- check_tracepoint "ctf"
-}
diff --git a/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp b/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
index 5ad8dabde47..78e8c942b57 100644
--- a/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
+++ b/gdb/testsuite/gdb.trace/mi-trace-frame-collected.exp
@@ -74,9 +74,6 @@ mi_gdb_test "-trace-stop" {.*\^done,stop-reason=.*} "trace stop"
set tracefile [standard_output_file ${testfile}]
mi_gdb_test "-trace-save ${tracefile}.tf" ".*\\^done" \
"save tfile trace file"
-# Save trace frames to ctf.
-mi_gdb_test "-trace-save -ctf ${tracefile}.ctf" ".*\\^done" \
- "save ctf trace file"
# Test the MI command '-trace-frame-collected' with DATA_SOURCE as
# trace data source.
@@ -138,26 +135,6 @@ proc test_trace_frame_collected { data_source } {
test_trace_frame_collected "live"
-# Change target to ctf if GDB supports it.
-set msg "-target-select ctf"
-send_gdb "-target-select ctf ${tracefile}.ctf\n"
-gdb_expect {
- -re ".*\\^connected.*${mi_gdb_prompt}$" {
- # GDB supports ctf, do the test.
- test_trace_frame_collected "ctf"
- }
- -re ".*\\^error,msg=\"Undefined target command.*${mi_gdb_prompt}$" {
- # GDB doesn't support ctf, skip the test.
- unsupported "gdb does not support ctf target"
- }
- -re ".*$mi_gdb_prompt$" {
- fail "$msg"
- }
- timeout {
- fail "$msg (timeout)"
- }
-}
-
# Change target to tfile.
mi_gdb_test "-target-select tfile ${tracefile}.tf" ".*\\^connected.*" \
"-target-select tfile"
diff --git a/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp b/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
index 58e41db1d51..9facc8dee17 100644
--- a/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
+++ b/gdb/testsuite/gdb.trace/mi-trace-unavailable.exp
@@ -68,9 +68,6 @@ mi_gdb_test "-trace-stop" {.*} "trace stop"
set tracefile [standard_output_file ${testfile}]
mi_gdb_test "-trace-save ${tracefile}.tf" ".*\\^done" \
"save tfile trace file"
-# Save trace frames to ctf.
-mi_gdb_test "-trace-save -ctf ${tracefile}.ctf" ".*\\^done" \
- "save ctf trace file"
proc test_trace_unavailable { data_source } {
global decimal
@@ -174,26 +171,6 @@ proc test_trace_unavailable { data_source } {
test_trace_unavailable "live"
-# Change target to ctf if GDB supports it.
-set msg "-target-select ctf"
-send_gdb "-target-select ctf ${tracefile}.ctf\n"
-gdb_expect {
- -re ".*\\^connected.*${mi_gdb_prompt}$" {
- # GDB supports ctf, do the test.
- test_trace_unavailable "ctf"
- }
- -re ".*\\^error,msg=\"Undefined target command.*${mi_gdb_prompt}$" {
- # GDB doesn't support ctf, skip the test.
- unsupported "gdb does not support ctf target"
- }
- -re ".*$mi_gdb_prompt$" {
- fail "$msg"
- }
- timeout {
- fail "$msg (timeout)"
- }
-}
-
# Change target to tfile.
mi_gdb_test "-target-select tfile ${tracefile}.tf" ".*\\^connected.*" \
"-target-select tfile"
diff --git a/gdb/testsuite/gdb.trace/report.exp b/gdb/testsuite/gdb.trace/report.exp
index 5ddffad076f..c67634e4ce7 100644
--- a/gdb/testsuite/gdb.trace/report.exp
+++ b/gdb/testsuite/gdb.trace/report.exp
@@ -399,11 +399,6 @@ gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'.*" \
"save tfile trace file"
-# Save trace frames to ctf.
-gdb_test "tsave -ctf ${tracefile}.ctf" \
- "Trace data saved to directory '${tracefile}.ctf'.*" \
- "save ctf trace file"
-
# Change target to tfile.
set test "change to tfile target"
gdb_test_multiple "target tfile ${tracefile}.tf" "$test" {
@@ -417,12 +412,3 @@ gdb_test_multiple "target tfile ${tracefile}.tf" "$test" {
}
# Test the collected trace frames from tfile.
use_collected_data "tfile"
-
-# Try to read ctf data if GDB supports.
-gdb_test_multiple "target ctf ${tracefile}.ctf" "" {
- -re "Undefined target command: \"ctf ${tracefile}.ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
- }
- -re ".*\r\n$gdb_prompt $" {
- use_collected_data "ctf"
- }
-}
diff --git a/gdb/testsuite/gdb.trace/tstatus.exp b/gdb/testsuite/gdb.trace/tstatus.exp
index 4ab6e2cbfc5..f8bc72e8cfc 100644
--- a/gdb/testsuite/gdb.trace/tstatus.exp
+++ b/gdb/testsuite/gdb.trace/tstatus.exp
@@ -142,10 +142,6 @@ set tracefile [standard_output_file ${testfile}]
gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'.*" \
"save tfile trace file"
-# Save trace frames to CTF.
-gdb_test "tsave -ctf ${tracefile}.ctf" \
- "Trace data saved to directory '${tracefile}.ctf'.*" \
- "save ctf trace file"
# Change target to tfile.
set test "change to tfile target"
@@ -166,13 +162,3 @@ set tstatus_output [string map {\) \\)} $tstatus_output]
# The status should be identical to the status of live inferior.
gdb_test "tstatus" "Using a trace file\.\r\n${tstatus_output}.*" \
"tstatus on tfile target"
-
-# Change target to ctf if GDB supports.
-gdb_test_multiple "target ctf ${tracefile}.ctf" "" {
- -re "Undefined target command: \"ctf ${tracefile}.ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
- }
- -re ".*\r\n$gdb_prompt $" {
- gdb_test "tstatus" "Using a trace file\.\r\n${tstatus_output}.*" \
- "tstatus on ctf target"
- }
-}
diff --git a/gdb/testsuite/gdb.trace/tsv.exp b/gdb/testsuite/gdb.trace/tsv.exp
index 60f59f9ab89..78527e2c767 100644
--- a/gdb/testsuite/gdb.trace/tsv.exp
+++ b/gdb/testsuite/gdb.trace/tsv.exp
@@ -150,10 +150,6 @@ set tracefile [standard_output_file ${testfile}]
gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'.*" \
"save tfile trace file"
-# Save trace frames to ctf.
-gdb_test "tsave -ctf ${tracefile}.ctf" \
- "Trace data saved to directory '${tracefile}.ctf'.*" \
- "save ctf trace file"
proc check_tsv { data_source } {
with_test_prefix "${data_source}" {
@@ -183,14 +179,6 @@ gdb_test_multiple "target tfile ${tracefile}.tf" "$test" {
# Check the tsv from tfile.
check_tsv "tfile"
-# Try to read ctf data if GDB supports.
-gdb_test_multiple "target ctf ${tracefile}.ctf" "" {
- -re "Undefined target command: \"ctf ${tracefile}.ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
- }
- -re ".*\r\n$gdb_prompt $" {
- check_tsv "ctf"
- }
-}
# Restart.
clean_restart $testfile
diff --git a/gdb/testsuite/gdb.trace/unavailable.exp b/gdb/testsuite/gdb.trace/unavailable.exp
index 295b0b42467..309ef2a8585 100644
--- a/gdb/testsuite/gdb.trace/unavailable.exp
+++ b/gdb/testsuite/gdb.trace/unavailable.exp
@@ -191,9 +191,6 @@ proc gdb_collect_args_test {} {
gdb_test "tsave ${tracefile}.args.tfile" \
"Trace data saved to file '${tracefile}.args.tfile'\\." \
"tsave ${testfile}.args.tfile"
- gdb_test "tsave -ctf ${tracefile}.args.ctf" \
- "Trace data saved to directory '${tracefile}.args.ctf'\\." \
- "save ctf trace file"
foreach target_name ${trace_file_targets} {
# Restart GDB and read the trace data in ${TARGET_NAME} target.
@@ -271,9 +268,6 @@ proc gdb_collect_locals_test { func msg } {
gdb_test "tsave ${tracefile}.locals.tfile" \
"Trace data saved to file '${tracefile}.locals.tfile'\\." \
"tsave ${testfile}.locals.tfile"
- gdb_test "tsave -ctf ${tracefile}.locals.ctf" \
- "Trace data saved to directory '${tracefile}.locals.ctf'\\." \
- "save ctf trace file"
foreach target_name ${trace_file_targets} {
# Restart GDB and read the trace data in ${TARGET_NAME} target.
@@ -352,9 +346,6 @@ proc gdb_unavailable_registers_test { } {
gdb_test "tsave ${tracefile}.registers.tfile" \
"Trace data saved to file '${tracefile}.registers.tfile'\\." \
"tsave ${testfile}.registers.tfile"
- gdb_test "tsave -ctf ${tracefile}.registers.ctf" \
- "Trace data saved to directory '${tracefile}.registers.ctf'\\." \
- "save ctf trace file"
foreach target_name ${trace_file_targets} {
# Restart GDB and read the trace data in ${TARGET_NAME} target.
@@ -414,9 +405,6 @@ proc gdb_unavailable_floats { } {
gdb_test "tsave ${tracefile}.floats.tfile" \
"Trace data saved to file '${tracefile}.floats.tfile'\\." \
"tsave ${testfile}.floats.tfile"
- gdb_test "tsave -ctf ${tracefile}.floats.ctf" \
- "Trace data saved to directory '${tracefile}.floats.ctf'\\." \
- "save ctf trace file"
foreach target_name ${trace_file_targets} {
# Restart GDB and read the trace data in ${TARGET_NAME} target.
@@ -679,9 +667,6 @@ proc gdb_collect_globals_test { } {
gdb_test "tsave ${tracefile}.globals.tfile" \
"Trace data saved to file '${tracefile}.globals.tfile'\\." \
"tsave ${testfile}.globals.tfile"
- gdb_test "tsave -ctf ${tracefile}.globals.ctf" \
- "Trace data saved to directory '${tracefile}.globals.ctf'\\." \
- "save ctf trace file"
foreach target_name ${trace_file_targets} {
# Restart GDB and read the trace data in ${TARGET_NAME} target.
@@ -719,13 +704,6 @@ if {![gdb_target_supports_trace]} {
}
set trace_file_targets [list "tfile"]
-gdb_test_multiple "target ctf" "" {
- -re "Undefined target command: \"ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
- }
- -re "No CTF directory specified.*\r\n$gdb_prompt $" {
- lappend trace_file_targets "ctf"
- }
-}
# Body of test encased in a proc so we can return prematurely.
gdb_trace_collection_test
diff --git a/gdb/testsuite/gdb.trace/while-stepping.exp b/gdb/testsuite/gdb.trace/while-stepping.exp
index 0dde1a83418..f96034391a2 100644
--- a/gdb/testsuite/gdb.trace/while-stepping.exp
+++ b/gdb/testsuite/gdb.trace/while-stepping.exp
@@ -139,9 +139,6 @@ set tracefile [standard_output_file ${testfile}]
gdb_test "tsave ${tracefile}.tf" \
"Trace data saved to file '${tracefile}.tf'\\." \
"save tfile trace file"
-gdb_test "tsave -ctf ${tracefile}.ctf" \
- "Trace data saved to directory '${tracefile}.ctf'\\." \
- "save ctf trace file"
# Restart GDB and read the trace data in tfile target.
clean_restart
@@ -149,22 +146,3 @@ gdb_file_cmd $binfile
gdb_test "target tfile ${tracefile}.tf" ".*" \
"change to tfile target"
check_tracepoint "tfile"
-
-# Try to read ctf data if GDB supports.
-set gdb_can_read_ctf_data 0
-gdb_test_multiple "target ctf" "" {
- -re "Undefined target command: \"ctf\"\. Try \"help target\"\.\r\n$gdb_prompt $" {
- set gdb_can_read_ctf_data 0
- }
- -re "No CTF directory specified.*\r\n$gdb_prompt $" {
- set gdb_can_read_ctf_data 1
- }
-}
-
-if { $gdb_can_read_ctf_data } {
- clean_restart
- gdb_file_cmd $binfile
- gdb_test "target ctf ${tracefile}.ctf" ".*" \
- "change to ctf target"
- check_tracepoint "ctf"
-}
diff --git a/gdb/top.c b/gdb/top.c
index 7526c07a87b..477c385da61 100644
--- a/gdb/top.c
+++ b/gdb/top.c
@@ -1658,16 +1658,6 @@ This GDB was configured as follows:\n\
"));
#endif
-#if HAVE_LIBBABELTRACE
- gdb_printf (stream, _("\
- --with-babeltrace\n\
-"));
-#else
- gdb_printf (stream, _("\
- --without-babeltrace\n\
-"));
-#endif
-
#if HAVE_LIBIPT
gdb_printf (stream, _("\
--with-intel-pt\n\
diff --git a/gdb/tracectf.c b/gdb/tracectf.c
deleted file mode 100644
index 9246022b517..00000000000
--- a/gdb/tracectf.c
+++ /dev/null
@@ -1,1728 +0,0 @@
-/* CTF format support.
-
- Copyright (C) 2012-2026 Free Software Foundation, Inc.
- Contributed by Hui Zhu <hui_zhu@mentor.com>
- Contributed by Yao Qi <yao@codesourcery.com>
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#include "tracectf.h"
-#include "tracepoint.h"
-#include "regcache.h"
-#include <sys/stat.h>
-#include "exec.h"
-#include "completer.h"
-#include "inferior.h"
-#include "gdbthread.h"
-#include "tracefile.h"
-#include <algorithm>
-#include "gdbsupport/filestuff.h"
-#include "gdbarch.h"
-#include "cli/cli-style.h"
-
-/* GDB saves trace buffers and other information (such as trace
- status) got from the remote target into Common Trace Format (CTF).
- The following types of information are expected to save in CTF:
-
- 1. The length (in bytes) of register cache. Event "register" will
- be defined in metadata, which includes the length.
-
- 2. Trace status. Event "status" is defined in metadata, which
- includes all aspects of trace status.
-
- 3. Uploaded trace variables. Event "tsv_def" is defined in
- metadata, which is about all aspects of a uploaded trace variable.
- Uploaded tracepoints. Event "tp_def" is defined in meta, which
- is about all aspects of an uploaded tracepoint. Note that the
- "sequence" (a CTF type, which is a dynamically-sized array.) is
- used for "actions" "step_actions" and "cmd_strings".
-
- 4. Trace frames. Each trace frame is composed by several blocks
- of different types ('R', 'M', 'V'). One trace frame is saved in
- one CTF packet and the blocks of this frame are saved as events.
- 4.1: The trace frame related information (such as the number of
- tracepoint associated with this frame) is saved in the packet
- context.
- 4.2: The block 'M', 'R' and 'V' are saved in event "memory",
- "register" and "tsv" respectively.
- 4.3: When iterating over events, babeltrace can't tell iterator
- goes to a new packet, so we need a marker or anchor to tell GDB
- that iterator goes into a new packet or frame. We define event
- "frame". */
-
-#define CTF_MAGIC 0xC1FC1FC1
-#define CTF_SAVE_MAJOR 1
-#define CTF_SAVE_MINOR 8
-
-#define CTF_METADATA_NAME "metadata"
-#define CTF_DATASTREAM_NAME "datastream"
-
-/* Reserved event id. */
-
-#define CTF_EVENT_ID_REGISTER 0
-#define CTF_EVENT_ID_TSV 1
-#define CTF_EVENT_ID_MEMORY 2
-#define CTF_EVENT_ID_FRAME 3
-#define CTF_EVENT_ID_STATUS 4
-#define CTF_EVENT_ID_TSV_DEF 5
-#define CTF_EVENT_ID_TP_DEF 6
-
-#define CTF_PID (2)
-
-/* The state kept while writing the CTF datastream file. */
-
-struct trace_write_handler
-{
- /* File descriptor of metadata. */
- FILE *metadata_fd;
- /* File descriptor of traceframes. */
- FILE *datastream_fd;
-
- /* This is the content size of the current packet. */
- size_t content_size;
-
- /* This is the start offset of current packet. */
- long packet_start;
-};
-
-/* Write metadata in FORMAT. */
-
-static void
-ctf_save_write_metadata (struct trace_write_handler *handler,
- const char *format, ...)
- ATTRIBUTE_PRINTF (2, 3);
-
-static void
-ctf_save_write_metadata (struct trace_write_handler *handler,
- const char *format, ...)
-{
- va_list args;
-
- va_start (args, format);
- if (vfprintf (handler->metadata_fd, format, args) < 0)
- error (_("Unable to write metadata file (%s)"),
- safe_strerror (errno));
- va_end (args);
-}
-
-/* Write BUF of length SIZE to datastream file represented by
- HANDLER. */
-
-static int
-ctf_save_write (struct trace_write_handler *handler,
- const gdb_byte *buf, size_t size)
-{
- if (fwrite (buf, size, 1, handler->datastream_fd) != 1)
- error (_("Unable to write file for saving trace data (%s)"),
- safe_strerror (errno));
-
- handler->content_size += size;
-
- return 0;
-}
-
-/* Write a unsigned 32-bit integer to datastream file represented by
- HANDLER. */
-
-#define ctf_save_write_uint32(HANDLER, U32) \
- ctf_save_write (HANDLER, (gdb_byte *) &U32, 4)
-
-/* Write a signed 32-bit integer to datastream file represented by
- HANDLER. */
-
-#define ctf_save_write_int32(HANDLER, INT32) \
- ctf_save_write ((HANDLER), (gdb_byte *) &(INT32), 4)
-
-/* Set datastream file position. Update HANDLER->content_size
- if WHENCE is SEEK_CUR. */
-
-static int
-ctf_save_fseek (struct trace_write_handler *handler, long offset,
- int whence)
-{
- gdb_assert (whence != SEEK_END);
- gdb_assert (whence != SEEK_SET
- || offset <= handler->content_size + handler->packet_start);
-
- if (fseek (handler->datastream_fd, offset, whence))
- error (_("Unable to seek file for saving trace data (%s)"),
- safe_strerror (errno));
-
- if (whence == SEEK_CUR)
- handler->content_size += offset;
-
- return 0;
-}
-
-/* Change the datastream file position to align on ALIGN_SIZE,
- and write BUF to datastream file. The size of BUF is SIZE. */
-
-static int
-ctf_save_align_write (struct trace_write_handler *handler,
- const gdb_byte *buf,
- size_t size, size_t align_size)
-{
- long offset
- = (align_up (handler->content_size, align_size)
- - handler->content_size);
-
- if (ctf_save_fseek (handler, offset, SEEK_CUR))
- return -1;
-
- if (ctf_save_write (handler, buf, size))
- return -1;
-
- return 0;
-}
-
-/* Write events to next new packet. */
-
-static void
-ctf_save_next_packet (struct trace_write_handler *handler)
-{
- handler->packet_start += (handler->content_size + 4);
- ctf_save_fseek (handler, handler->packet_start, SEEK_SET);
- handler->content_size = 0;
-}
-
-/* Write the CTF metadata header. */
-
-static void
-ctf_save_metadata_header (struct trace_write_handler *handler)
-{
- ctf_save_write_metadata (handler, "/* CTF %d.%d */\n",
- CTF_SAVE_MAJOR, CTF_SAVE_MINOR);
- ctf_save_write_metadata (handler,
- "typealias integer { size = 8; align = 8; "
- "signed = false; encoding = ascii;}"
- " := ascii;\n");
- ctf_save_write_metadata (handler,
- "typealias integer { size = 8; align = 8; "
- "signed = false; }"
- " := uint8_t;\n");
- ctf_save_write_metadata (handler,
- "typealias integer { size = 16; align = 16;"
- "signed = false; } := uint16_t;\n");
- ctf_save_write_metadata (handler,
- "typealias integer { size = 32; align = 32;"
- "signed = false; } := uint32_t;\n");
- ctf_save_write_metadata (handler,
- "typealias integer { size = 64; align = 64;"
- "signed = false; base = hex;}"
- " := uint64_t;\n");
- ctf_save_write_metadata (handler,
- "typealias integer { size = 32; align = 32;"
- "signed = true; } := int32_t;\n");
- ctf_save_write_metadata (handler,
- "typealias integer { size = 64; align = 64;"
- "signed = true; } := int64_t;\n");
- ctf_save_write_metadata (handler,
- "typealias string { encoding = ascii;"
- " } := chars;\n");
- ctf_save_write_metadata (handler, "\n");
-
- /* Get the byte order of the host and write CTF data in this byte
- order. */
-#if WORDS_BIGENDIAN
-#define HOST_ENDIANNESS "be"
-#else
-#define HOST_ENDIANNESS "le"
-#endif
-
- ctf_save_write_metadata (handler,
- "\ntrace {\n"
- " major = %u;\n"
- " minor = %u;\n"
- " byte_order = %s;\n"
- " packet.header := struct {\n"
- " uint32_t magic;\n"
- " };\n"
- "};\n"
- "\n"
- "stream {\n"
- " packet.context := struct {\n"
- " uint32_t content_size;\n"
- " uint32_t packet_size;\n"
- " uint16_t tpnum;\n"
- " };\n"
- " event.header := struct {\n"
- " uint32_t id;\n"
- " };\n"
- "};\n",
- CTF_SAVE_MAJOR, CTF_SAVE_MINOR,
- HOST_ENDIANNESS);
- ctf_save_write_metadata (handler, "\n");
-}
-
-/* CTF trace writer. */
-
-struct ctf_trace_file_writer
-{
- struct trace_file_writer base;
-
- /* States related to writing CTF trace file. */
- struct trace_write_handler tcs;
-};
-
-/* This is the implementation of trace_file_write_ops method
- dtor. */
-
-static void
-ctf_dtor (struct trace_file_writer *self)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
-
- if (writer->tcs.metadata_fd != NULL)
- fclose (writer->tcs.metadata_fd);
-
- if (writer->tcs.datastream_fd != NULL)
- fclose (writer->tcs.datastream_fd);
-
-}
-
-/* This is the implementation of trace_file_write_ops method
- target_save. */
-
-static int
-ctf_target_save (struct trace_file_writer *self,
- const char *dirname)
-{
- /* Don't support save trace file to CTF format in the target. */
- return 0;
-}
-
-/* This is the implementation of trace_file_write_ops method
- start. It creates the directory DIRNAME, metadata and datastream
- in the directory. */
-
-static void
-ctf_start (struct trace_file_writer *self, const char *dirname)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
- mode_t hmode = S_IRUSR | S_IWUSR | S_IXUSR | S_IRGRP | S_IXGRP | S_IROTH;
-
- /* Create DIRNAME. */
- if (mkdir (dirname, hmode) && errno != EEXIST)
- error (_("Unable to open directory '%ps' for saving trace data (%s)"),
- styled_string (file_name_style.style (), dirname),
- safe_strerror (errno));
-
- memset (&writer->tcs, '\0', sizeof (writer->tcs));
-
- std::string file_name = string_printf ("%s/%s", dirname, CTF_METADATA_NAME);
-
- writer->tcs.metadata_fd
- = gdb_fopen_cloexec (file_name.c_str (), "w").release ();
- if (writer->tcs.metadata_fd == NULL)
- error (_("Unable to open file '%ps' for saving trace data (%s)"),
- styled_string (file_name_style.style (), file_name.c_str ()),
- safe_strerror (errno));
-
- ctf_save_metadata_header (&writer->tcs);
-
- file_name = string_printf ("%s/%s", dirname, CTF_DATASTREAM_NAME);
- writer->tcs.datastream_fd
- = gdb_fopen_cloexec (file_name.c_str (), "w").release ();
- if (writer->tcs.datastream_fd == NULL)
- error (_("Unable to open file '%ps' for saving trace data (%s)"),
- styled_string (file_name_style.style (), file_name.c_str ()),
- safe_strerror (errno));
-}
-
-/* This is the implementation of trace_file_write_ops method
- write_header. Write the types of events on trace variable and
- frame. */
-
-static void
-ctf_write_header (struct trace_file_writer *self)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
-
-
- ctf_save_write_metadata (&writer->tcs, "\n");
- ctf_save_write_metadata (&writer->tcs,
- "event {\n\tname = \"memory\";\n\tid = %u;\n"
- "\tfields := struct { \n"
- "\t\tuint64_t address;\n"
- "\t\tuint16_t length;\n"
- "\t\tuint8_t contents[length];\n"
- "\t};\n"
- "};\n", CTF_EVENT_ID_MEMORY);
-
- ctf_save_write_metadata (&writer->tcs, "\n");
- ctf_save_write_metadata (&writer->tcs,
- "event {\n\tname = \"tsv\";\n\tid = %u;\n"
- "\tfields := struct { \n"
- "\t\tuint64_t val;\n"
- "\t\tuint32_t num;\n"
- "\t};\n"
- "};\n", CTF_EVENT_ID_TSV);
-
- ctf_save_write_metadata (&writer->tcs, "\n");
- ctf_save_write_metadata (&writer->tcs,
- "event {\n\tname = \"frame\";\n\tid = %u;\n"
- "\tfields := struct { \n"
- "\t};\n"
- "};\n", CTF_EVENT_ID_FRAME);
-
- ctf_save_write_metadata (&writer->tcs, "\n");
- ctf_save_write_metadata (&writer->tcs,
- "event {\n\tname = \"tsv_def\";\n"
- "\tid = %u;\n\tfields := struct { \n"
- "\t\tint64_t initial_value;\n"
- "\t\tint32_t number;\n"
- "\t\tint32_t builtin;\n"
- "\t\tchars name;\n"
- "\t};\n"
- "};\n", CTF_EVENT_ID_TSV_DEF);
-
- ctf_save_write_metadata (&writer->tcs, "\n");
- ctf_save_write_metadata (&writer->tcs,
- "event {\n\tname = \"tp_def\";\n"
- "\tid = %u;\n\tfields := struct { \n"
- "\t\tuint64_t addr;\n"
- "\t\tuint64_t traceframe_usage;\n"
- "\t\tint32_t number;\n"
- "\t\tint32_t enabled;\n"
- "\t\tint32_t step;\n"
- "\t\tint32_t pass;\n"
- "\t\tint32_t hit_count;\n"
- "\t\tint32_t type;\n"
- "\t\tchars cond;\n"
-
- "\t\tuint32_t action_num;\n"
- "\t\tchars actions[action_num];\n"
-
- "\t\tuint32_t step_action_num;\n"
- "\t\tchars step_actions[step_action_num];\n"
-
- "\t\tchars at_string;\n"
- "\t\tchars cond_string;\n"
-
- "\t\tuint32_t cmd_num;\n"
- "\t\tchars cmd_strings[cmd_num];\n"
- "\t};\n"
- "};\n", CTF_EVENT_ID_TP_DEF);
-
- gdb_assert (writer->tcs.content_size == 0);
- gdb_assert (writer->tcs.packet_start == 0);
-
- /* Create a new packet to contain this event. */
- self->ops->frame_ops->start (self, 0);
-}
-
-/* This is the implementation of trace_file_write_ops method
- write_regblock_type. Write the type of register event in
- metadata. */
-
-static void
-ctf_write_regblock_type (struct trace_file_writer *self, int size)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
-
- ctf_save_write_metadata (&writer->tcs, "\n");
-
- ctf_save_write_metadata (&writer->tcs,
- "event {\n\tname = \"register\";\n\tid = %u;\n"
- "\tfields := struct { \n"
- "\t\tascii contents[%d];\n"
- "\t};\n"
- "};\n",
- CTF_EVENT_ID_REGISTER, size);
-}
-
-/* This is the implementation of trace_file_write_ops method
- write_status. */
-
-static void
-ctf_write_status (struct trace_file_writer *self,
- struct trace_status *ts)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
- uint32_t id;
-
- ctf_save_write_metadata (&writer->tcs, "\n");
- ctf_save_write_metadata (&writer->tcs,
- "event {\n\tname = \"status\";\n\tid = %u;\n"
- "\tfields := struct { \n"
- "\t\tint32_t stop_reason;\n"
- "\t\tint32_t stopping_tracepoint;\n"
- "\t\tint32_t traceframe_count;\n"
- "\t\tint32_t traceframes_created;\n"
- "\t\tint32_t buffer_free;\n"
- "\t\tint32_t buffer_size;\n"
- "\t\tint32_t disconnected_tracing;\n"
- "\t\tint32_t circular_buffer;\n"
- "\t};\n"
- "};\n",
- CTF_EVENT_ID_STATUS);
-
- id = CTF_EVENT_ID_STATUS;
- /* Event Id. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &id, 4, 4);
-
- ctf_save_write_int32 (&writer->tcs, ts->stop_reason);
- ctf_save_write_int32 (&writer->tcs, ts->stopping_tracepoint);
- ctf_save_write_int32 (&writer->tcs, ts->traceframe_count);
- ctf_save_write_int32 (&writer->tcs, ts->traceframes_created);
- ctf_save_write_int32 (&writer->tcs, ts->buffer_free);
- ctf_save_write_int32 (&writer->tcs, ts->buffer_size);
- ctf_save_write_int32 (&writer->tcs, ts->disconnected_tracing);
- ctf_save_write_int32 (&writer->tcs, ts->circular_buffer);
-}
-
-/* This is the implementation of trace_file_write_ops method
- write_uploaded_tsv. */
-
-static void
-ctf_write_uploaded_tsv (struct trace_file_writer *self,
- struct uploaded_tsv *tsv)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
- int32_t int32;
- int64_t int64;
- const gdb_byte zero = 0;
-
- /* Event Id. */
- int32 = CTF_EVENT_ID_TSV_DEF;
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &int32, 4, 4);
-
- /* initial_value */
- int64 = tsv->initial_value;
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &int64, 8, 8);
-
- /* number */
- ctf_save_write_int32 (&writer->tcs, tsv->number);
-
- /* builtin */
- ctf_save_write_int32 (&writer->tcs, tsv->builtin);
-
- /* name */
- if (tsv->name != NULL)
- ctf_save_write (&writer->tcs, (gdb_byte *) tsv->name,
- strlen (tsv->name));
- ctf_save_write (&writer->tcs, &zero, 1);
-}
-
-/* This is the implementation of trace_file_write_ops method
- write_uploaded_tp. */
-
-static void
-ctf_write_uploaded_tp (struct trace_file_writer *self,
- struct uploaded_tp *tp)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
- int32_t int32;
- int64_t int64;
- uint32_t u32;
- const gdb_byte zero = 0;
-
- /* Event Id. */
- int32 = CTF_EVENT_ID_TP_DEF;
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &int32, 4, 4);
-
- /* address */
- int64 = tp->addr;
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &int64, 8, 8);
-
- /* traceframe_usage */
- int64 = tp->traceframe_usage;
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &int64, 8, 8);
-
- /* number */
- ctf_save_write_int32 (&writer->tcs, tp->number);
-
- /* enabled */
- ctf_save_write_int32 (&writer->tcs, tp->enabled);
-
- /* step */
- ctf_save_write_int32 (&writer->tcs, tp->step);
-
- /* pass */
- ctf_save_write_int32 (&writer->tcs, tp->pass);
-
- /* hit_count */
- ctf_save_write_int32 (&writer->tcs, tp->hit_count);
-
- /* type */
- ctf_save_write_int32 (&writer->tcs, tp->type);
-
- /* condition */
- if (tp->cond != NULL)
- ctf_save_write (&writer->tcs, (gdb_byte *) tp->cond.get (),
- strlen (tp->cond.get ()));
- ctf_save_write (&writer->tcs, &zero, 1);
-
- /* actions */
- u32 = tp->actions.size ();
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &u32, 4, 4);
- for (const auto &act : tp->actions)
- ctf_save_write (&writer->tcs, (gdb_byte *) act.get (),
- strlen (act.get ()) + 1);
-
- /* step_actions */
- u32 = tp->step_actions.size ();
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &u32, 4, 4);
- for (const auto &act : tp->step_actions)
- ctf_save_write (&writer->tcs, (gdb_byte *) act.get (),
- strlen (act.get ()) + 1);
-
- /* at_string */
- if (tp->at_string != NULL)
- ctf_save_write (&writer->tcs, (gdb_byte *) tp->at_string.get (),
- strlen (tp->at_string.get ()));
- ctf_save_write (&writer->tcs, &zero, 1);
-
- /* cond_string */
- if (tp->cond_string != NULL)
- ctf_save_write (&writer->tcs, (gdb_byte *) tp->cond_string.get (),
- strlen (tp->cond_string.get ()));
- ctf_save_write (&writer->tcs, &zero, 1);
-
- /* cmd_strings */
- u32 = tp->cmd_strings.size ();
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &u32, 4, 4);
- for (const auto &act : tp->cmd_strings)
- ctf_save_write (&writer->tcs, (gdb_byte *) act.get (),
- strlen (act.get ()) + 1);
-
-}
-
-/* This is the implementation of trace_file_write_ops method
- write_tdesc. */
-
-static void
-ctf_write_tdesc (struct trace_file_writer *self)
-{
- /* Nothing so far. */
-}
-
-/* This is the implementation of trace_file_write_ops method
- write_definition_end. */
-
-static void
-ctf_write_definition_end (struct trace_file_writer *self)
-{
- self->ops->frame_ops->end (self);
-}
-
-/* This is the implementation of trace_file_write_ops method
- end. */
-
-static void
-ctf_end (struct trace_file_writer *self)
-{
- struct ctf_trace_file_writer *writer = (struct ctf_trace_file_writer *) self;
-
- gdb_assert (writer->tcs.content_size == 0);
-}
-
-/* This is the implementation of trace_frame_write_ops method
- start. */
-
-static void
-ctf_write_frame_start (struct trace_file_writer *self, uint16_t tpnum)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
- uint32_t id = CTF_EVENT_ID_FRAME;
- uint32_t u32;
-
- /* Step 1: Write packet context. */
- /* magic. */
- u32 = CTF_MAGIC;
- ctf_save_write_uint32 (&writer->tcs, u32);
- /* content_size and packet_size.. We still don't know the value,
- write it later. */
- ctf_save_fseek (&writer->tcs, 4, SEEK_CUR);
- ctf_save_fseek (&writer->tcs, 4, SEEK_CUR);
- /* Tracepoint number. */
- ctf_save_write (&writer->tcs, (gdb_byte *) &tpnum, 2);
-
- /* Step 2: Write event "frame". */
- /* Event Id. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &id, 4, 4);
-}
-
-/* This is the implementation of trace_frame_write_ops method
- write_r_block. */
-
-static void
-ctf_write_frame_r_block (struct trace_file_writer *self,
- gdb_byte *buf, int32_t size)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
- uint32_t id = CTF_EVENT_ID_REGISTER;
-
- /* Event Id. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &id, 4, 4);
-
- /* array contents. */
- ctf_save_align_write (&writer->tcs, buf, size, 1);
-}
-
-/* This is the implementation of trace_frame_write_ops method
- write_m_block_header. */
-
-static void
-ctf_write_frame_m_block_header (struct trace_file_writer *self,
- uint64_t addr, uint16_t length)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
- uint32_t event_id = CTF_EVENT_ID_MEMORY;
-
- /* Event Id. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &event_id, 4, 4);
-
- /* Address. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &addr, 8, 8);
-
- /* Length. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &length, 2, 2);
-}
-
-/* This is the implementation of trace_frame_write_ops method
- write_m_block_memory. */
-
-static void
-ctf_write_frame_m_block_memory (struct trace_file_writer *self,
- gdb_byte *buf, uint16_t length)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
-
- /* Contents. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) buf, length, 1);
-}
-
-/* This is the implementation of trace_frame_write_ops method
- write_v_block. */
-
-static void
-ctf_write_frame_v_block (struct trace_file_writer *self,
- int32_t num, uint64_t val)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
- uint32_t id = CTF_EVENT_ID_TSV;
-
- /* Event Id. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &id, 4, 4);
-
- /* val. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &val, 8, 8);
- /* num. */
- ctf_save_align_write (&writer->tcs, (gdb_byte *) &num, 4, 4);
-}
-
-/* This is the implementation of trace_frame_write_ops method
- end. */
-
-static void
-ctf_write_frame_end (struct trace_file_writer *self)
-{
- struct ctf_trace_file_writer *writer
- = (struct ctf_trace_file_writer *) self;
- uint32_t u32;
- uint32_t t;
-
- /* Write the content size to packet header. */
- ctf_save_fseek (&writer->tcs, writer->tcs.packet_start + 4,
- SEEK_SET);
- u32 = writer->tcs.content_size * TARGET_CHAR_BIT;
-
- t = writer->tcs.content_size;
- ctf_save_write_uint32 (&writer->tcs, u32);
-
- /* Write the packet size. */
- u32 += 4 * TARGET_CHAR_BIT;
- ctf_save_write_uint32 (&writer->tcs, u32);
-
- writer->tcs.content_size = t;
-
- /* Write zero at the end of the packet. */
- ctf_save_fseek (&writer->tcs, writer->tcs.packet_start + t,
- SEEK_SET);
- u32 = 0;
- ctf_save_write_uint32 (&writer->tcs, u32);
- writer->tcs.content_size = t;
-
- ctf_save_next_packet (&writer->tcs);
-}
-
-/* Operations to write various types of trace frames into CTF
- format. */
-
-static const struct trace_frame_write_ops ctf_write_frame_ops =
-{
- ctf_write_frame_start,
- ctf_write_frame_r_block,
- ctf_write_frame_m_block_header,
- ctf_write_frame_m_block_memory,
- ctf_write_frame_v_block,
- ctf_write_frame_end,
-};
-
-/* Operations to write trace buffers into CTF format. */
-
-static const struct trace_file_write_ops ctf_write_ops =
-{
- ctf_dtor,
- ctf_target_save,
- ctf_start,
- ctf_write_header,
- ctf_write_regblock_type,
- ctf_write_status,
- ctf_write_uploaded_tsv,
- ctf_write_uploaded_tp,
- ctf_write_tdesc,
- ctf_write_definition_end,
- NULL,
- &ctf_write_frame_ops,
- ctf_end,
-};
-
-/* Return a trace writer for CTF format. */
-
-struct trace_file_writer *
-ctf_trace_file_writer_new (void)
-{
- struct ctf_trace_file_writer *writer = XNEW (struct ctf_trace_file_writer);
-
- writer->base.ops = &ctf_write_ops;
-
- return (struct trace_file_writer *) writer;
-}
-
-#if HAVE_LIBBABELTRACE
-/* Use libbabeltrace to read CTF data. The libbabeltrace provides
- iterator to iterate over each event in CTF data and APIs to get
- details of event and packet, so it is very convenient to use
- libbabeltrace to access events in CTF. */
-
-#include <babeltrace/babeltrace.h>
-#include <babeltrace/ctf/events.h>
-#include <babeltrace/ctf/iterator.h>
-
-/* The CTF target. */
-
-static const target_info ctf_target_info = {
- "ctf",
- N_("CTF file"),
- N_("(Use a CTF directory as a target.\n\
-Specify the filename of the CTF directory.")
-};
-
-class ctf_target final : public tracefile_target
-{
-public:
- const target_info &info () const override
- { return ctf_target_info; }
-
- void close () override;
- void fetch_registers (struct regcache *, int) override;
- enum target_xfer_status xfer_partial (enum target_object object,
- const char *annex,
- gdb_byte *readbuf,
- const gdb_byte *writebuf,
- ULONGEST offset, ULONGEST len,
- ULONGEST *xfered_len) override;
- void files_info () override;
- int trace_find (enum trace_find_type type, int num,
- CORE_ADDR addr1, CORE_ADDR addr2, int *tpp) override;
- bool get_trace_state_variable_value (int tsv, LONGEST *val) override;
- traceframe_info_up traceframe_info () override;
-};
-
-/* The struct pointer for current CTF directory. */
-static struct bt_context *ctx = NULL;
-static struct bt_ctf_iter *ctf_iter = NULL;
-/* The position of the first packet containing trace frame. */
-static struct bt_iter_pos *start_pos;
-
-/* The name of CTF directory. */
-static gdb::unique_xmalloc_ptr<char> trace_dirname;
-
-static ctf_target ctf_ops;
-
-/* Destroy ctf iterator and context. */
-
-static void
-ctf_destroy (void)
-{
- if (ctf_iter != NULL)
- {
- bt_ctf_iter_destroy (ctf_iter);
- ctf_iter = NULL;
- }
- if (ctx != NULL)
- {
- bt_context_put (ctx);
- ctx = NULL;
- }
-}
-
-/* Open CTF trace data in DIRNAME. */
-
-static void
-ctf_open_dir (const char *dirname)
-{
- struct bt_iter_pos begin_pos;
- unsigned int count, i;
- struct bt_ctf_event_decl * const *list;
-
- ctx = bt_context_create ();
- if (ctx == NULL)
- error (_("Unable to create bt_context"));
- int handle_id = bt_context_add_trace (ctx, dirname, "ctf", NULL, NULL, NULL);
- if (handle_id < 0)
- {
- ctf_destroy ();
- error (_("Unable to use libbabeltrace on directory \"%s\""),
- dirname);
- }
-
- begin_pos.type = BT_SEEK_BEGIN;
- ctf_iter = bt_ctf_iter_create (ctx, &begin_pos, NULL);
- if (ctf_iter == NULL)
- {
- ctf_destroy ();
- error (_("Unable to create bt_iterator"));
- }
-
- /* Look for the declaration of register block. Get the length of
- array "contents" to set trace_regblock_size. */
-
- bt_ctf_get_event_decl_list (handle_id, ctx, &list, &count);
- for (i = 0; i < count; i++)
- if (streq ("register", bt_ctf_get_decl_event_name (list[i])))
- {
- const struct bt_ctf_field_decl * const *field_list;
- const struct bt_declaration *decl;
-
- bt_ctf_get_decl_fields (list[i], BT_EVENT_FIELDS, &field_list,
- &count);
-
- gdb_assert (count == 1);
- gdb_assert (streq ("contents",
- bt_ctf_get_decl_field_name (field_list[0])));
- decl = bt_ctf_get_decl_from_field_decl (field_list[0]);
- trace_regblock_size = bt_ctf_get_array_len (decl);
-
- break;
- }
-}
-
-#define SET_INT32_FIELD(EVENT, SCOPE, VAR, FIELD) \
- (VAR)->FIELD = (int) bt_ctf_get_int64 (bt_ctf_get_field ((EVENT), \
- (SCOPE), \
- #FIELD))
-
-#define SET_ENUM_FIELD(EVENT, SCOPE, VAR, TYPE, FIELD) \
- (VAR)->FIELD = (TYPE) bt_ctf_get_int64 (bt_ctf_get_field ((EVENT), \
- (SCOPE), \
- #FIELD))
-
-
-/* EVENT is the "status" event and TS is filled in. */
-
-static void
-ctf_read_status (struct bt_ctf_event *event, struct trace_status *ts)
-{
- const struct bt_definition *scope
- = bt_ctf_get_top_level_scope (event, BT_EVENT_FIELDS);
-
- SET_ENUM_FIELD (event, scope, ts, enum trace_stop_reason, stop_reason);
- SET_INT32_FIELD (event, scope, ts, stopping_tracepoint);
- SET_INT32_FIELD (event, scope, ts, traceframe_count);
- SET_INT32_FIELD (event, scope, ts, traceframes_created);
- SET_INT32_FIELD (event, scope, ts, buffer_free);
- SET_INT32_FIELD (event, scope, ts, buffer_size);
- SET_INT32_FIELD (event, scope, ts, disconnected_tracing);
- SET_INT32_FIELD (event, scope, ts, circular_buffer);
-
- bt_iter_next (bt_ctf_get_iter (ctf_iter));
-}
-
-/* Read the events "tsv_def" one by one, extract its contents and fill
- in the list UPLOADED_TSVS. */
-
-static void
-ctf_read_tsv (struct uploaded_tsv **uploaded_tsvs)
-{
- gdb_assert (ctf_iter != NULL);
-
- while (1)
- {
- struct bt_ctf_event *event;
- const struct bt_definition *scope;
- const struct bt_definition *def;
- uint32_t event_id;
- struct uploaded_tsv *utsv = NULL;
-
- event = bt_ctf_iter_read_event (ctf_iter);
- scope = bt_ctf_get_top_level_scope (event,
- BT_STREAM_EVENT_HEADER);
- event_id = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope,
- "id"));
- if (event_id != CTF_EVENT_ID_TSV_DEF)
- break;
-
- scope = bt_ctf_get_top_level_scope (event,
- BT_EVENT_FIELDS);
-
- def = bt_ctf_get_field (event, scope, "number");
- utsv = get_uploaded_tsv ((int32_t) bt_ctf_get_int64 (def),
- uploaded_tsvs);
-
- def = bt_ctf_get_field (event, scope, "builtin");
- utsv->builtin = (int32_t) bt_ctf_get_int64 (def);
- def = bt_ctf_get_field (event, scope, "initial_value");
- utsv->initial_value = bt_ctf_get_int64 (def);
-
- def = bt_ctf_get_field (event, scope, "name");
- utsv->name = xstrdup (bt_ctf_get_string (def));
-
- if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
- break;
- }
-
-}
-
-/* Read the value of element whose index is NUM from CTF and write it
- to the corresponding VAR->ARRAY. */
-
-#define SET_ARRAY_FIELD(EVENT, SCOPE, VAR, NUM, ARRAY) \
- do \
- { \
- uint32_t lu32, i; \
- const struct bt_definition *def; \
- \
- lu32 = (uint32_t) bt_ctf_get_uint64 (bt_ctf_get_field ((EVENT), \
- (SCOPE), \
- #NUM)); \
- def = bt_ctf_get_field ((EVENT), (SCOPE), #ARRAY); \
- for (i = 0; i < lu32; i++) \
- { \
- const struct bt_definition *element \
- = bt_ctf_get_index ((EVENT), def, i); \
- \
- (VAR)->ARRAY.emplace_back \
- (xstrdup (bt_ctf_get_string (element))); \
- } \
- } \
- while (0)
-
-/* Read a string from CTF and set VAR->FIELD. If the length of string
- is zero, set VAR->FIELD to NULL. */
-
-#define SET_STRING_FIELD(EVENT, SCOPE, VAR, FIELD) \
- do \
- { \
- const char *p = bt_ctf_get_string (bt_ctf_get_field ((EVENT), \
- (SCOPE), \
- #FIELD)); \
- \
- if (strlen (p) > 0) \
- (VAR)->FIELD = make_unique_xstrdup (p); \
- else \
- (VAR)->FIELD = nullptr; \
- } \
- while (0)
-
-/* Read the events "tp_def" one by one, extract its contents and fill
- in the list UPLOADED_TPS. */
-
-static void
-ctf_read_tp (struct uploaded_tp **uploaded_tps)
-{
- gdb_assert (ctf_iter != NULL);
-
- while (1)
- {
- struct bt_ctf_event *event;
- const struct bt_definition *scope;
- uint32_t u32;
- int32_t int32;
- uint64_t u64;
- struct uploaded_tp *utp = NULL;
-
- event = bt_ctf_iter_read_event (ctf_iter);
- scope = bt_ctf_get_top_level_scope (event,
- BT_STREAM_EVENT_HEADER);
- u32 = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope,
- "id"));
- if (u32 != CTF_EVENT_ID_TP_DEF)
- break;
-
- scope = bt_ctf_get_top_level_scope (event,
- BT_EVENT_FIELDS);
- int32 = (int32_t) bt_ctf_get_int64 (bt_ctf_get_field (event,
- scope,
- "number"));
- u64 = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope,
- "addr"));
- utp = get_uploaded_tp (int32, u64, uploaded_tps);
-
- SET_INT32_FIELD (event, scope, utp, enabled);
- SET_INT32_FIELD (event, scope, utp, step);
- SET_INT32_FIELD (event, scope, utp, pass);
- SET_INT32_FIELD (event, scope, utp, hit_count);
- SET_ENUM_FIELD (event, scope, utp, enum bptype, type);
-
- /* Read 'cmd_strings'. */
- SET_ARRAY_FIELD (event, scope, utp, cmd_num, cmd_strings);
- /* Read 'actions'. */
- SET_ARRAY_FIELD (event, scope, utp, action_num, actions);
- /* Read 'step_actions'. */
- SET_ARRAY_FIELD (event, scope, utp, step_action_num,
- step_actions);
-
- SET_STRING_FIELD(event, scope, utp, at_string);
- SET_STRING_FIELD(event, scope, utp, cond_string);
-
- if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
- break;
- }
-}
-
-/* This is the implementation of target_ops method to_open. Open CTF
- trace data, read trace status, trace state variables and tracepoint
- definitions from the first packet. Set the start position at the
- second packet which contains events on trace blocks. */
-
-static void
-ctf_target_open (const char *args, int from_tty)
-{
- struct bt_ctf_event *event;
- uint32_t event_id;
- const struct bt_definition *scope;
- struct uploaded_tsv *uploaded_tsvs = NULL;
- struct uploaded_tp *uploaded_tps = NULL;
-
- std::string dirname = extract_single_filename_arg (args);
- if (dirname.empty ())
- error (_("No CTF directory specified."));
-
- ctf_open_dir (dirname.c_str ());
-
- target_preopen (from_tty);
-
- /* Skip the first packet which about the trace status. The first
- event is "frame". */
- event = bt_ctf_iter_read_event (ctf_iter);
- scope = bt_ctf_get_top_level_scope (event, BT_STREAM_EVENT_HEADER);
- event_id = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "id"));
- if (event_id != CTF_EVENT_ID_FRAME)
- error (_("Wrong event id of the first event"));
- /* The second event is "status". */
- bt_iter_next (bt_ctf_get_iter (ctf_iter));
- event = bt_ctf_iter_read_event (ctf_iter);
- scope = bt_ctf_get_top_level_scope (event, BT_STREAM_EVENT_HEADER);
- event_id = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "id"));
- if (event_id != CTF_EVENT_ID_STATUS)
- error (_("Wrong event id of the second event"));
- ctf_read_status (event, current_trace_status ());
-
- ctf_read_tsv (&uploaded_tsvs);
-
- ctf_read_tp (&uploaded_tps);
-
- event = bt_ctf_iter_read_event (ctf_iter);
- /* EVENT can be NULL if we've already gone to the end of stream of
- events. */
- if (event != NULL)
- {
- scope = bt_ctf_get_top_level_scope (event,
- BT_STREAM_EVENT_HEADER);
- event_id = bt_ctf_get_uint64 (bt_ctf_get_field (event,
- scope, "id"));
- if (event_id != CTF_EVENT_ID_FRAME)
- error (_("Wrong event id of the first event of the second packet"));
- }
-
- start_pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
- gdb_assert (start_pos->type == BT_SEEK_RESTORE);
-
- trace_dirname = make_unique_xstrdup (dirname.c_str ());
- current_inferior ()->push_target (&ctf_ops);
-
- inferior_appeared (current_inferior (), CTF_PID);
-
- thread_info *thr = add_thread_silent (&ctf_ops, ptid_t (CTF_PID));
- switch_to_thread (thr);
-
- merge_uploaded_trace_state_variables (&uploaded_tsvs);
- merge_uploaded_tracepoints (&uploaded_tps);
-
- post_create_inferior (from_tty, true);
-}
-
-/* This is the implementation of target_ops method to_close. Destroy
- CTF iterator and context. */
-
-void
-ctf_target::close ()
-{
- ctf_destroy ();
- trace_dirname.reset ();
-
- switch_to_no_thread (); /* Avoid confusion from thread stuff. */
- exit_inferior (current_inferior ());
-
- trace_reset_local_state ();
-}
-
-/* This is the implementation of target_ops method to_files_info.
- Print the directory name of CTF trace data. */
-
-void
-ctf_target::files_info ()
-{
- gdb_printf ("\t`%s'\n", trace_dirname.get ());
-}
-
-/* This is the implementation of target_ops method to_fetch_registers.
- Iterate over events whose name is "register" in current frame,
- extract contents from events, and set REGCACHE with the contents.
- If no matched events are found, mark registers unavailable. */
-
-void
-ctf_target::fetch_registers (struct regcache *regcache, int regno)
-{
- struct gdbarch *gdbarch = regcache->arch ();
- struct bt_ctf_event *event = NULL;
- struct bt_iter_pos *pos;
-
- /* An uninitialized reg size says we're not going to be
- successful at getting register blocks. */
- if (trace_regblock_size == 0)
- return;
-
- gdb_assert (ctf_iter != NULL);
- /* Save the current position. */
- pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
- gdb_assert (pos->type == BT_SEEK_RESTORE);
-
- while (1)
- {
- const char *name;
- struct bt_ctf_event *event1;
-
- event1 = bt_ctf_iter_read_event (ctf_iter);
-
- name = bt_ctf_event_name (event1);
-
- if (name == NULL || streq (name, "frame"))
- break;
- else if (streq (name, "register"))
- {
- event = event1;
- break;
- }
-
- if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
- break;
- }
-
- /* Restore the position. */
- bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
-
- if (event != NULL)
- {
- int offset, regsize, regn;
- const struct bt_definition *scope
- = bt_ctf_get_top_level_scope (event,
- BT_EVENT_FIELDS);
- const struct bt_definition *array
- = bt_ctf_get_field (event, scope, "contents");
- gdb_byte *regs = (gdb_byte *) bt_ctf_get_char_array (array);
-
- /* Assume the block is laid out in GDB register number order,
- each register with the size that it has in GDB. */
- offset = 0;
- for (regn = 0; regn < gdbarch_num_regs (gdbarch); regn++)
- {
- regsize = register_size (gdbarch, regn);
- /* Make sure we stay within block bounds. */
- if (offset + regsize >= trace_regblock_size)
- break;
- if (regcache->get_register_status (regn) == REG_UNKNOWN)
- {
- if (regno == regn)
- {
- regcache->raw_supply (regno, regs + offset);
- break;
- }
- else if (regno == -1)
- {
- regcache->raw_supply (regn, regs + offset);
- }
- }
- offset += regsize;
- }
- }
- else
- tracefile_fetch_registers (regcache, regno);
-}
-
-/* This is the implementation of target_ops method to_xfer_partial.
- Iterate over events whose name is "memory" in
- current frame, extract the address and length from events. If
- OFFSET is within the range, read the contents from events to
- READBUF. */
-
-enum target_xfer_status
-ctf_target::xfer_partial (enum target_object object,
- const char *annex, gdb_byte *readbuf,
- const gdb_byte *writebuf, ULONGEST offset,
- ULONGEST len, ULONGEST *xfered_len)
-{
- /* We're only doing regular memory for now. */
- if (object != TARGET_OBJECT_MEMORY)
- return TARGET_XFER_E_IO;
-
- if (readbuf == NULL)
- error (_("ctf_xfer_partial: trace file is read-only"));
-
- if (get_traceframe_number () != -1)
- {
- struct bt_iter_pos *pos;
- enum target_xfer_status res;
- /* Records the lowest available address of all blocks that
- intersects the requested range. */
- ULONGEST low_addr_available = 0;
-
- gdb_assert (ctf_iter != NULL);
- /* Save the current position. */
- pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
- gdb_assert (pos->type == BT_SEEK_RESTORE);
-
- /* Iterate through the traceframe's blocks, looking for
- memory. */
- while (1)
- {
- ULONGEST amt;
- uint64_t maddr;
- uint16_t mlen;
- const struct bt_definition *scope;
- const struct bt_definition *def;
- struct bt_ctf_event *event
- = bt_ctf_iter_read_event (ctf_iter);
- const char *name = bt_ctf_event_name (event);
-
- if (name == NULL || streq (name, "frame"))
- break;
- else if (!streq (name, "memory"))
- {
- if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
- break;
-
- continue;
- }
-
- scope = bt_ctf_get_top_level_scope (event,
- BT_EVENT_FIELDS);
-
- def = bt_ctf_get_field (event, scope, "address");
- maddr = bt_ctf_get_uint64 (def);
- def = bt_ctf_get_field (event, scope, "length");
- mlen = (uint16_t) bt_ctf_get_uint64 (def);
-
- /* If the block includes the first part of the desired
- range, return as much it has; GDB will re-request the
- remainder, which might be in a different block of this
- trace frame. */
- if (maddr <= offset && offset < (maddr + mlen))
- {
- const struct bt_definition *array
- = bt_ctf_get_field (event, scope, "contents");
- int k;
-
- gdb::byte_vector contents (mlen);
-
- for (k = 0; k < mlen; k++)
- {
- const struct bt_definition *element
- = bt_ctf_get_index (event, array, k);
-
- contents[k] = (gdb_byte) bt_ctf_get_uint64 (element);
- }
-
- amt = (maddr + mlen) - offset;
- if (amt > len)
- amt = len;
-
- memcpy (readbuf, &contents[offset - maddr], amt);
-
- /* Restore the position. */
- bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
-
- if (amt == 0)
- return TARGET_XFER_EOF;
- else
- {
- *xfered_len = amt;
- return TARGET_XFER_OK;
- }
- }
-
- if (offset < maddr && maddr < (offset + len))
- if (low_addr_available == 0 || low_addr_available > maddr)
- low_addr_available = maddr;
-
- if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
- break;
- }
-
- /* Restore the position. */
- bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
-
- /* Requested memory is unavailable in the context of traceframes,
- and this address falls within a read-only section, fallback
- to reading from executable, up to LOW_ADDR_AVAILABLE */
- if (offset < low_addr_available)
- len = std::min (len, low_addr_available - offset);
- res = exec_read_partial_read_only (readbuf, offset, len, xfered_len);
-
- if (res == TARGET_XFER_OK)
- return TARGET_XFER_OK;
- else
- {
- /* No use trying further, we know some memory starting
- at MEMADDR isn't available. */
- *xfered_len = len;
- return TARGET_XFER_UNAVAILABLE;
- }
- }
- else
- {
- /* Fallback to reading from read-only sections. */
- return section_table_read_available_memory (readbuf, offset, len, xfered_len);
- }
-}
-
-/* This is the implementation of target_ops method
- to_get_trace_state_variable_value.
- Iterate over events whose name is "tsv" in current frame. When the
- trace variable is found, set the value of it to *VAL and return
- true, otherwise return false. */
-
-bool
-ctf_target::get_trace_state_variable_value (int tsvnum, LONGEST *val)
-{
- struct bt_iter_pos *pos;
- bool found = false;
-
- gdb_assert (ctf_iter != NULL);
- /* Save the current position. */
- pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
- gdb_assert (pos->type == BT_SEEK_RESTORE);
-
- /* Iterate through the traceframe's blocks, looking for 'V'
- block. */
- while (1)
- {
- struct bt_ctf_event *event
- = bt_ctf_iter_read_event (ctf_iter);
- const char *name = bt_ctf_event_name (event);
-
- if (name == NULL || streq (name, "frame"))
- break;
- else if (streq (name, "tsv"))
- {
- const struct bt_definition *scope;
- const struct bt_definition *def;
-
- scope = bt_ctf_get_top_level_scope (event,
- BT_EVENT_FIELDS);
-
- def = bt_ctf_get_field (event, scope, "num");
- if (tsvnum == (int32_t) bt_ctf_get_uint64 (def))
- {
- def = bt_ctf_get_field (event, scope, "val");
- *val = bt_ctf_get_uint64 (def);
-
- found = true;
- }
- }
-
- if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
- break;
- }
-
- /* Restore the position. */
- bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
-
- return found;
-}
-
-/* Return the tracepoint number in "frame" event. */
-
-static int
-ctf_get_tpnum_from_frame_event (struct bt_ctf_event *event)
-{
- /* The packet context of events has a field "tpnum". */
- const struct bt_definition *scope
- = bt_ctf_get_top_level_scope (event, BT_STREAM_PACKET_CONTEXT);
- uint64_t tpnum
- = bt_ctf_get_uint64 (bt_ctf_get_field (event, scope, "tpnum"));
-
- return (int) tpnum;
-}
-
-/* Return the address at which the current frame was collected. */
-
-static CORE_ADDR
-ctf_get_traceframe_address (void)
-{
- struct bt_ctf_event *event = NULL;
- struct bt_iter_pos *pos;
- CORE_ADDR addr = 0;
-
- gdb_assert (ctf_iter != NULL);
- pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
- gdb_assert (pos->type == BT_SEEK_RESTORE);
-
- while (1)
- {
- const char *name;
- struct bt_ctf_event *event1;
-
- event1 = bt_ctf_iter_read_event (ctf_iter);
-
- name = bt_ctf_event_name (event1);
-
- if (name == NULL)
- break;
- else if (streq (name, "frame"))
- {
- event = event1;
- break;
- }
-
- if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
- break;
- }
-
- if (event != NULL)
- {
- int tpnum = ctf_get_tpnum_from_frame_event (event);
- struct tracepoint *tp
- = get_tracepoint_by_number_on_target (tpnum);
-
- if (tp != nullptr && tp->has_locations ())
- addr = tp->first_loc ().address;
- }
-
- /* Restore the position. */
- bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
-
- return addr;
-}
-
-/* This is the implementation of target_ops method to_trace_find.
- Iterate the events whose name is "frame", extract the tracepoint
- number in it. Return traceframe number when matched. */
-
-int
-ctf_target::trace_find (enum trace_find_type type, int num,
- CORE_ADDR addr1, CORE_ADDR addr2, int *tpp)
-{
- int tfnum = 0;
- int found = 0;
-
- if (num == -1)
- {
- if (tpp != NULL)
- *tpp = -1;
- return -1;
- }
-
- gdb_assert (ctf_iter != NULL);
- /* Set iterator back to the start. */
- bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), start_pos);
-
- while (1)
- {
- struct bt_ctf_event *event;
- const char *name;
-
- event = bt_ctf_iter_read_event (ctf_iter);
-
- name = bt_ctf_event_name (event);
-
- if (event == NULL || name == NULL)
- break;
-
- if (streq (name, "frame"))
- {
- CORE_ADDR tfaddr;
-
- if (type == tfind_number)
- {
- /* Looking for a specific trace frame. */
- if (tfnum == num)
- found = 1;
- }
- else
- {
- /* Start from the _next_ trace frame. */
- if (tfnum > get_traceframe_number ())
- {
- switch (type)
- {
- case tfind_tp:
- {
- struct tracepoint *tp = get_tracepoint (num);
-
- if (tp != NULL
- && (tp->number_on_target
- == ctf_get_tpnum_from_frame_event (event)))
- found = 1;
- break;
- }
- case tfind_pc:
- tfaddr = ctf_get_traceframe_address ();
- if (tfaddr == addr1)
- found = 1;
- break;
- case tfind_range:
- tfaddr = ctf_get_traceframe_address ();
- if (addr1 <= tfaddr && tfaddr <= addr2)
- found = 1;
- break;
- case tfind_outside:
- tfaddr = ctf_get_traceframe_address ();
- if (!(addr1 <= tfaddr && tfaddr <= addr2))
- found = 1;
- break;
- default:
- internal_error (_("unknown tfind type"));
- }
- }
- }
- if (found)
- {
- if (tpp != NULL)
- *tpp = ctf_get_tpnum_from_frame_event (event);
-
- /* Skip the event "frame". */
- bt_iter_next (bt_ctf_get_iter (ctf_iter));
-
- return tfnum;
- }
- tfnum++;
- }
-
- if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
- break;
- }
-
- return -1;
-}
-
-/* This is the implementation of target_ops method to_traceframe_info.
- Iterate the events whose name is "memory", in current
- frame, extract memory range information, and return them in
- traceframe_info. */
-
-traceframe_info_up
-ctf_target::traceframe_info ()
-{
- traceframe_info_up info (new struct traceframe_info);
- const char *name;
- struct bt_iter_pos *pos;
-
- gdb_assert (ctf_iter != NULL);
- /* Save the current position. */
- pos = bt_iter_get_pos (bt_ctf_get_iter (ctf_iter));
- gdb_assert (pos->type == BT_SEEK_RESTORE);
-
- do
- {
- struct bt_ctf_event *event
- = bt_ctf_iter_read_event (ctf_iter);
-
- name = bt_ctf_event_name (event);
-
- if (name == nullptr || streq (name, "register") || streq (name, "frame"))
- ;
- else if (streq (name, "memory"))
- {
- const struct bt_definition *scope
- = bt_ctf_get_top_level_scope (event,
- BT_EVENT_FIELDS);
- const struct bt_definition *def;
-
- def = bt_ctf_get_field (event, scope, "address");
- CORE_ADDR start = bt_ctf_get_uint64 (def);
-
- def = bt_ctf_get_field (event, scope, "length");
- int length = (uint16_t) bt_ctf_get_uint64 (def);
-
- info->memory.emplace_back (start, length);
- }
- else if (streq (name, "tsv"))
- {
- int vnum;
- const struct bt_definition *scope
- = bt_ctf_get_top_level_scope (event,
- BT_EVENT_FIELDS);
- const struct bt_definition *def;
-
- def = bt_ctf_get_field (event, scope, "num");
- vnum = (int) bt_ctf_get_uint64 (def);
- info->tvars.push_back (vnum);
- }
- else
- {
- warning (_("Unhandled trace block type (%s) "
- "while building trace frame info."),
- name);
- }
-
- if (bt_iter_next (bt_ctf_get_iter (ctf_iter)) < 0)
- break;
- }
- while (name != NULL && !streq (name, "frame"));
-
- /* Restore the position. */
- bt_iter_set_pos (bt_ctf_get_iter (ctf_iter), pos);
-
- return info;
-}
-
-#endif
-
-/* module initialization */
-
-INIT_GDB_FILE (ctf)
-{
-#if HAVE_LIBBABELTRACE
- add_target (ctf_target_info, ctf_target_open,
- filename_maybe_quoted_completer);
-#endif
-}
diff --git a/gdb/tracectf.h b/gdb/tracectf.h
deleted file mode 100644
index b0aa35f4621..00000000000
--- a/gdb/tracectf.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* CTF format support.
-
- Copyright (C) 2012-2026 Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>. */
-
-#ifndef GDB_TRACECTF_H
-#define GDB_TRACECTF_H
-
-extern struct trace_file_writer *ctf_trace_file_writer_new (void);
-
-#endif /* GDB_TRACECTF_H */
diff --git a/gdb/tracefile.c b/gdb/tracefile.c
index 6dc699f3efe..c4ebb823126 100644
--- a/gdb/tracefile.c
+++ b/gdb/tracefile.c
@@ -19,7 +19,6 @@
#include "tracefile.h"
#include "extract-store-integer.h"
-#include "tracectf.h"
#include "exec.h"
#include "regcache.h"
#include "gdbsupport/byte-vector.h"
@@ -323,7 +322,6 @@ tsave_command (const char *args, int from_tty)
int target_does_save = 0;
char **argv;
char *filename = NULL;
- int generate_ctf = 0;
if (args == NULL)
error_no_arg (_("file in which to save trace data"));
@@ -335,8 +333,6 @@ tsave_command (const char *args, int from_tty)
{
if (streq (*argv, "-r"))
target_does_save = 1;
- else if (streq (*argv, "-ctf"))
- generate_ctf = 1;
else if (**argv == '-')
error (_("unknown option `%s'"), *argv);
else
@@ -346,14 +342,10 @@ tsave_command (const char *args, int from_tty)
if (!filename)
error_no_arg (_("file in which to save trace data"));
- if (generate_ctf)
- trace_save_ctf (filename, target_does_save);
- else
- trace_save_tfile (filename, target_does_save);
+ trace_save_tfile (filename, target_does_save);
if (from_tty)
- gdb_printf (_("Trace data saved to %s '%s'.\n"),
- generate_ctf ? "directory" : "file", filename);
+ gdb_printf (_("Trace data saved to file '%s'.\n"), filename);
}
/* Save the trace data to file FILENAME of tfile format. */
@@ -365,17 +357,7 @@ trace_save_tfile (const char *filename, int target_does_save)
trace_save (filename, writer.get (), target_does_save);
}
-/* Save the trace data to dir DIRNAME of ctf format. */
-
-void
-trace_save_ctf (const char *dirname, int target_does_save)
-{
- trace_file_writer_up writer (ctf_trace_file_writer_new ());
- trace_save (dirname, writer.get (), target_does_save);
-}
-
-/* Fetch register data from tracefile, shared for both tfile and
- ctf. */
+/* Fetch register data from tracefile. */
void
tracefile_fetch_registers (struct regcache *regcache, int regno)
@@ -477,7 +459,6 @@ INIT_GDB_FILE (tracefile)
{
add_com ("tsave", class_trace, tsave_command, _("\
Save the trace data to a file.\n\
-Use the '-ctf' option to save the data to CTF format.\n\
Use the '-r' option to direct the target to save directly to the file,\n\
using its own filesystem."));
}
diff --git a/gdb/tracepoint.h b/gdb/tracepoint.h
index 247723aa7ee..19742c9c235 100644
--- a/gdb/tracepoint.h
+++ b/gdb/tracepoint.h
@@ -416,8 +416,6 @@ extern void tfind_1 (enum trace_find_type type, int num,
extern void trace_save_tfile (const char *filename,
int target_does_save);
-extern void trace_save_ctf (const char *dirname,
- int target_does_save);
extern traceframe_info_up parse_traceframe_info (const char *tframe_info);
--
2.53.0
next reply other threads:[~2026-05-10 2:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-10 2:28 Sergio Durigan Junior [this message]
2026-05-10 4:47 ` Eli Zaretskii
2026-05-10 12:43 ` Simon Marchi
2026-05-10 16:42 ` Sergio Durigan Junior
2026-05-11 1:25 ` Simon Marchi
2026-05-11 3:52 ` Sergio Durigan Junior
2026-05-11 3:56 ` Sergio Durigan Junior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260510022813.2221582-1-sergiodj@sergiodj.net \
--to=sergiodj@sergiodj.net \
--cc=doko@debian.org \
--cc=gdb-patches@sourceware.org \
--cc=mjeanson@debian.org \
--cc=simon.marchi@polymtl.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox