From: Kevin Buettner via Gdb-patches <gdb-patches@sourceware.org>
To: gdb-patches@sourceware.org
Cc: pedro@palves.net, Kevin Buettner <kevinb@redhat.com>,
Tom de Vries <tdevries@suse.de>
Subject: [PATCH v5 3/8] Catch gdb_exception_error instead of gdb_exception (in many places)
Date: Wed, 22 Feb 2023 16:46:08 -0700 [thread overview]
Message-ID: <20230222234613.29662-4-kevinb@redhat.com> (raw)
In-Reply-To: <20230222234613.29662-1-kevinb@redhat.com>
As described in the previous commit for this series, I became
concerned that there might be instances in which a QUIT (due to either
a SIGINT or SIGTERM) might not cause execution to return to the top
level. In some (though very few) instances, it is okay to not
propagate the exception for a Ctrl-C / SIGINT, but I don't think that
it is ever okay to swallow the exception caused by a SIGTERM.
Allowing that to happen would definitely be a deviation from the
current behavior in which GDB exits upon receipt of a SIGTERM.
I looked at all cases where an exception handler catches a
gdb_exception. Handlers which did NOT need modification were those
which satisifed one or more of the following conditions:
1) There is no call path to maybe_quit() in the try block. I used a
static analysis tool to help make this determination. In
instances where the tool didn't provide an answer of "yes, this
call path can result in maybe_quit() being called", I reviewed it
by hand.
2) The catch block contains a throw for conditions that it
doesn't want to handle; these "not handled" conditions
must include the quit exception and the new "forced quit" exception.
3) There was (also) a catch for gdb_exception_quit.
Any try/catch blocks not meeting the above conditions could
potentially swallow a QUIT exception.
My first thought was to add catch blocks for gdb_exception_quit and
then rethrow the exception. But Pedro pointed out that this can be
handled without adding additional code by simply catching
gdb_exception_error instead. That's what this patch series does.
There are some oddball cases which needed to be handled differently,
plus the extension languages, but those are handled in later patches.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=26761
Tested-by: Tom de Vries <tdevries@suse.de>
Approved-by: Pedro Alves <pedro@palves.net>
---
gdb/ada-lang.c | 2 +-
gdb/breakpoint.c | 8 ++++----
gdb/i386-linux-tdep.c | 2 +-
gdb/inf-loop.c | 2 +-
gdb/infcmd.c | 2 +-
gdb/infrun.c | 2 +-
gdb/jit.c | 2 +-
gdb/mi/mi-cmd-break.c | 2 +-
gdb/mi/mi-interp.c | 2 +-
gdb/objc-lang.c | 2 +-
gdb/parse.c | 2 +-
gdb/printcmd.c | 2 +-
gdb/record-btrace.c | 2 +-
gdb/record-full.c | 2 +-
gdb/solib.c | 2 +-
gdb/sparc64-linux-tdep.c | 2 +-
gdb/symfile-mem.c | 2 +-
17 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/gdb/ada-lang.c b/gdb/ada-lang.c
index 7c528ab629f..8e87a2aef6d 100644
--- a/gdb/ada-lang.c
+++ b/gdb/ada-lang.c
@@ -12296,7 +12296,7 @@ should_stop_exception (const struct bp_location *bl)
scoped_value_mark mark;
stop = value_true (evaluate_expression (ada_loc->excep_cond_expr.get ()));
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_fprintf (gdb_stderr, ex,
_("Error in testing exception condition:\n"));
diff --git a/gdb/breakpoint.c b/gdb/breakpoint.c
index 0db3adaf916..ebf9d8f1349 100644
--- a/gdb/breakpoint.c
+++ b/gdb/breakpoint.c
@@ -2840,7 +2840,7 @@ insert_bp_location (struct bp_location *bl,
if (val)
bp_excpt = gdb_exception {RETURN_ERROR, GENERIC_ERROR};
}
- catch (gdb_exception &e)
+ catch (gdb_exception_error &e)
{
rethrow_on_target_close_error (e);
bp_excpt = std::move (e);
@@ -5302,7 +5302,7 @@ bpstat_check_watchpoint (bpstat *bs)
{
e = watchpoint_check (bs);
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_fprintf (gdb_stderr, ex,
"Error evaluating expression "
@@ -5546,7 +5546,7 @@ bpstat_check_breakpoint_conditions (bpstat *bs, thread_info *thread)
{
condition_result = breakpoint_cond_eval (cond);
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_fprintf (gdb_stderr, ex,
"Error in testing breakpoint condition:\n");
@@ -13518,7 +13518,7 @@ enable_breakpoint_disp (struct breakpoint *bpt, enum bpdisp disposition,
bpt->enable_state = bp_enabled;
update_watchpoint (w, true /* reparse */);
}
- catch (const gdb_exception &e)
+ catch (const gdb_exception_error &e)
{
bpt->enable_state = orig_enable_state;
exception_fprintf (gdb_stderr, e, _("Cannot enable watchpoint %d: "),
diff --git a/gdb/i386-linux-tdep.c b/gdb/i386-linux-tdep.c
index ad0377de5a6..a6adeca1b97 100644
--- a/gdb/i386-linux-tdep.c
+++ b/gdb/i386-linux-tdep.c
@@ -415,7 +415,7 @@ i386_linux_report_signal_info (struct gdbarch *gdbarch, struct ui_out *uiout,
access
= parse_and_eval_long ("$_siginfo._sifields._sigfault.si_addr");
}
- catch (const gdb_exception &exception)
+ catch (const gdb_exception_error &exception)
{
return;
}
diff --git a/gdb/inf-loop.c b/gdb/inf-loop.c
index f49d1c3c872..b9f25008247 100644
--- a/gdb/inf-loop.c
+++ b/gdb/inf-loop.c
@@ -69,7 +69,7 @@ inferior_event_handler (enum inferior_event_type event_type)
{
bpstat_do_actions ();
}
- catch (const gdb_exception &e)
+ catch (const gdb_exception_error &e)
{
/* If the user was running a foreground execution
command, then propagate the error so that the prompt
diff --git a/gdb/infcmd.c b/gdb/infcmd.c
index a851fe1f8c8..be8684b8016 100644
--- a/gdb/infcmd.c
+++ b/gdb/infcmd.c
@@ -1585,7 +1585,7 @@ print_return_value (struct ui_out *uiout, struct return_value_info *rv)
delete the breakpoint. */
print_return_value_1 (uiout, rv);
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_print (gdb_stdout, ex);
}
diff --git a/gdb/infrun.c b/gdb/infrun.c
index 3629db0443a..89ffd205062 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -8784,7 +8784,7 @@ normal_stop ()
{
execute_cmd_pre_hook (stop_command);
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_fprintf (gdb_stderr, ex,
"Error while running hook_stop:\n");
diff --git a/gdb/jit.c b/gdb/jit.c
index 0b089bc6a82..7f4b9f0fd37 100644
--- a/gdb/jit.c
+++ b/gdb/jit.c
@@ -716,7 +716,7 @@ jit_reader_try_read_symtab (gdbarch *gdbarch, jit_code_entry *code_entry,
code_entry->symfile_size))
status = 0;
}
- catch (const gdb_exception &e)
+ catch (const gdb_exception_error &e)
{
status = 0;
}
diff --git a/gdb/mi/mi-cmd-break.c b/gdb/mi/mi-cmd-break.c
index 8b0483803b6..75957b75bad 100644
--- a/gdb/mi/mi-cmd-break.c
+++ b/gdb/mi/mi-cmd-break.c
@@ -58,7 +58,7 @@ breakpoint_notify (struct breakpoint *b)
{
print_breakpoint (b);
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_print (gdb_stderr, ex);
}
diff --git a/gdb/mi/mi-interp.c b/gdb/mi/mi-interp.c
index 29d1aee8235..e1244f3df43 100644
--- a/gdb/mi/mi-interp.c
+++ b/gdb/mi/mi-interp.c
@@ -841,7 +841,7 @@ mi_print_breakpoint_for_event (struct mi_interp *mi, breakpoint *bp)
print_breakpoint (bp);
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_print (gdb_stderr, ex);
}
diff --git a/gdb/objc-lang.c b/gdb/objc-lang.c
index f43d158a770..4a9dee44dd7 100644
--- a/gdb/objc-lang.c
+++ b/gdb/objc-lang.c
@@ -1286,7 +1286,7 @@ find_objc_msgcall_submethod (int (*f) (CORE_ADDR, CORE_ADDR *),
if (f (pc, new_pc) == 0)
return 1;
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_fprintf (gdb_stderr, ex,
"Unable to determine target of "
diff --git a/gdb/parse.c b/gdb/parse.c
index f2917b30740..b2cc6c59fb5 100644
--- a/gdb/parse.c
+++ b/gdb/parse.c
@@ -514,7 +514,7 @@ parse_exp_in_context (const char **stringptr, CORE_ADDR pc,
{
lang->parser (&ps);
}
- catch (const gdb_exception &except)
+ catch (const gdb_exception_error &except)
{
/* If parsing for completion, allow this to succeed; but if no
expression elements have been written, then there's nothing
diff --git a/gdb/printcmd.c b/gdb/printcmd.c
index 0d3bc292d4e..341efc779fe 100644
--- a/gdb/printcmd.c
+++ b/gdb/printcmd.c
@@ -2126,7 +2126,7 @@ do_one_display (struct display *d)
d->exp = parse_expression (d->exp_string.c_str (), &tracker);
d->block = tracker.block ();
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
/* Can't re-parse the expression. Disable this display item. */
d->enabled_p = false;
diff --git a/gdb/record-btrace.c b/gdb/record-btrace.c
index 0daba893813..61de8491bb9 100644
--- a/gdb/record-btrace.c
+++ b/gdb/record-btrace.c
@@ -2932,7 +2932,7 @@ cmd_record_btrace_start (const char *args, int from_tty)
{
execute_command ("target record-btrace", from_tty);
}
- catch (const gdb_exception &exception)
+ catch (const gdb_exception_error &exception)
{
record_btrace_conf.format = BTRACE_FORMAT_BTS;
diff --git a/gdb/record-full.c b/gdb/record-full.c
index e3cfa3f45d5..15c5b7d682e 100644
--- a/gdb/record-full.c
+++ b/gdb/record-full.c
@@ -785,7 +785,7 @@ record_full_message_wrapper_safe (struct regcache *regcache,
{
record_full_message (regcache, signal);
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_print (gdb_stderr, ex);
return false;
diff --git a/gdb/solib.c b/gdb/solib.c
index 60bdf46cb91..ec0fcfb5beb 100644
--- a/gdb/solib.c
+++ b/gdb/solib.c
@@ -785,7 +785,7 @@ update_solib_list (int from_tty)
{
ops->open_symbol_file_object (from_tty);
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_fprintf (gdb_stderr, ex,
"Error reading attached "
diff --git a/gdb/sparc64-linux-tdep.c b/gdb/sparc64-linux-tdep.c
index beff812eeef..685df066f3a 100644
--- a/gdb/sparc64-linux-tdep.c
+++ b/gdb/sparc64-linux-tdep.c
@@ -139,7 +139,7 @@ sparc64_linux_report_signal_info (struct gdbarch *gdbarch, struct ui_out *uiout,
if (si_code >= SEGV_ACCADI && si_code <= SEGV_ADIPERR)
addr = parse_and_eval_long ("$_siginfo._sifields._sigfault.si_addr");
}
- catch (const gdb_exception &exception)
+ catch (const gdb_exception_error &exception)
{
return;
}
diff --git a/gdb/symfile-mem.c b/gdb/symfile-mem.c
index d36b9090e7e..7ac3ac709ec 100644
--- a/gdb/symfile-mem.c
+++ b/gdb/symfile-mem.c
@@ -197,7 +197,7 @@ add_vsyscall_page (inferior *inf)
name.c_str (),
0 /* from_tty */);
}
- catch (const gdb_exception &ex)
+ catch (const gdb_exception_error &ex)
{
exception_print (gdb_stderr, ex);
}
--
2.34.3
next prev parent reply other threads:[~2023-02-22 23:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-22 23:46 [PATCH v5 0/8] Fix gdb.base/gdb-sigterm.exp failure/error Kevin Buettner via Gdb-patches
2023-02-22 23:46 ` [PATCH v5 1/8] Introduce gdb_exception_forced_quit Kevin Buettner via Gdb-patches
2023-02-22 23:46 ` [PATCH v5 2/8] Handle gdb SIGTERM by throwing / catching gdb_exception_force_quit Kevin Buettner via Gdb-patches
2023-03-02 20:14 ` Simon Marchi via Gdb-patches
2023-02-22 23:46 ` Kevin Buettner via Gdb-patches [this message]
2023-02-22 23:46 ` [PATCH v5 4/8] Python QUIT processing updates Kevin Buettner via Gdb-patches
2023-02-22 23:46 ` [PATCH v5 5/8] Guile " Kevin Buettner via Gdb-patches
2023-02-22 23:46 ` [PATCH v5 6/8] QUIT processing w/ explicit throw for gdb_exception_forced_quit Kevin Buettner via Gdb-patches
2023-02-22 23:46 ` [PATCH v5 7/8] Introduce set_force_quit_flag and change type of sync_quit_force_run Kevin Buettner via Gdb-patches
2023-02-22 23:46 ` [PATCH v5 8/8] Forced quit cases handled by resetting sync_quit_force_run Kevin Buettner via Gdb-patches
2023-02-23 13:01 ` [PATCH v5 0/8] Fix gdb.base/gdb-sigterm.exp failure/error Pedro Alves
2023-02-27 23:22 ` Kevin Buettner via Gdb-patches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230222234613.29662-4-kevinb@redhat.com \
--to=gdb-patches@sourceware.org \
--cc=kevinb@redhat.com \
--cc=pedro@palves.net \
--cc=tdevries@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox