From: Andrew Burgess <andrew.burgess@embecosm.com>
To: Mike Frysinger <vapier@gentoo.org>
Cc: gdb-patches@sourceware.org
Subject: Re: [PATCH] sim: common: add align_{up,down} to match gdb
Date: Wed, 9 Dec 2020 10:53:24 +0000 [thread overview]
Message-ID: <20201209105324.GA2945@embecosm.com> (raw)
In-Reply-To: <20201209064528.2661-1-vapier@gentoo.org>
* Mike Frysinger via Gdb-patches <gdb-patches@sourceware.org> [2020-12-09 01:45:28 -0500]:
> We have ALIGN_{8,16,PAGE} and FLOOR_PAGE macros (where PAGE is defined as
> 4k) which were imported from the ppc sim. But no other sim utilizes these
> and hardcoding the sizes in the name is a bit limiting.
>
> Let's delete these and import the two general macros that gdb uses:
> align_up(addr, bytes)
> align_down(addr, bytes)
>
> This in turn allows us to cut over the Blackfin code immediately.
> ---
> sim/bfin/ChangeLog | 5 +++++
> sim/bfin/interp.c | 7 ++++---
> sim/bfin/sim-main.h | 2 --
> sim/common/ChangeLog | 6 ++++++
> sim/common/sim-bits.h | 17 ++++-------------
> 5 files changed, 19 insertions(+), 18 deletions(-)
>
> diff --git a/sim/bfin/ChangeLog b/sim/bfin/ChangeLog
> index 18f287323126..2384009cab80 100644
> --- a/sim/bfin/ChangeLog
> +++ b/sim/bfin/ChangeLog
> @@ -1,3 +1,8 @@
> +2020-12-09 Mike Frysinger <vapier@gentoo.org>
> +
> + * interp.c: Change ALIGN to align_up.
> + * sim-main.h (ALIGN): Delete
LGTM.
Thanks,
Andrew
> +
> 2020-08-21 Simon Marchi <simon.marchi@polymtl.ca>
>
> * configure.ac: Include config/pkg.m4.
> diff --git a/sim/bfin/interp.c b/sim/bfin/interp.c
> index d884d1025c55..60ed6d73c393 100644
> --- a/sim/bfin/interp.c
> +++ b/sim/bfin/interp.c
> @@ -289,7 +289,7 @@ bfin_syscall (SIM_CPU *cpu)
> sc.result = heap;
> heap += sc.arg2;
> /* Keep it page aligned. */
> - heap = ALIGN (heap, 4096);
> + heap = align_up (heap, 4096);
>
> break;
> }
> @@ -948,7 +948,8 @@ bfin_fdpic_load (SIM_DESC sd, SIM_CPU *cpu, struct bfd *abfd, bu32 *sp,
> }
>
> /* Update the load offset with a few extra pages. */
> - fdpic_load_offset = ALIGN (max (max_load_addr, fdpic_load_offset), 0x10000);
> + fdpic_load_offset = align_up (max (max_load_addr, fdpic_load_offset),
> + 0x10000);
> fdpic_load_offset += 0x10000;
>
> /* Push the summary loadmap info onto the stack last. */
> @@ -1074,7 +1075,7 @@ bfin_user_init (SIM_DESC sd, SIM_CPU *cpu, struct bfd *abfd,
> env_flat += strlen (env[i]);
>
> /* Push the Auxiliary Vector Table between argv/env and actual strings. */
> - sp_flat = sp = ALIGN (SPREG - argv_flat - env_flat - 4, 4);
> + sp_flat = sp = align_up (SPREG - argv_flat - env_flat - 4, 4);
> if (auxvt)
> {
> # define AT_PUSH(at, val) \
> diff --git a/sim/bfin/sim-main.h b/sim/bfin/sim-main.h
> index e9fe76ed2c28..ed3ac80929de 100644
> --- a/sim/bfin/sim-main.h
> +++ b/sim/bfin/sim-main.h
> @@ -53,9 +53,7 @@ struct sim_state {
> #include "dv-bfin_trace.h"
>
> #undef CLAMP
> -#undef ALIGN
> #define CLAMP(a, b, c) min (max (a, b), c)
> -#define ALIGN(addr, size) (((addr) + ((size)-1)) & ~((size)-1))
>
> /* TODO: Move all this trace logic to the common code. */
> #define BFIN_TRACE_CORE(cpu, addr, size, map, val) \
> diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog
> index 2c71b1359042..98649924809e 100644
> --- a/sim/common/ChangeLog
> +++ b/sim/common/ChangeLog
> @@ -1,3 +1,9 @@
> +2020-12-09 Mike Frysinger <vapier@gentoo.org>
> +
> + * sim-bits.h (_ALIGNa, _FLOORa, ALIGN_8, ALIGN_16, ALIGN_PAGE,
> + FLOOR_PAGE): Delete unused macros.
> + (align_up, align_down): Define.
> +
> 2020-08-10 Tom de Vries <tdevries@suse.de>
>
> * sim-cpu.c: Include stdlib.h for free.
> diff --git a/sim/common/sim-bits.h b/sim/common/sim-bits.h
> index 4b9de3796359..43f459cf8f4b 100644
> --- a/sim/common/sim-bits.h
> +++ b/sim/common/sim-bits.h
> @@ -92,11 +92,8 @@
> EXTEND*(VALUE): Convert the `*' bit value to the targets natural
> word size. Sign extend the value if needed.
>
> - ALIGN_*(VALUE): Round the value upwards so that it is aligned to a
> - `_*' byte boundary.
> -
> - FLOOR_*(VALUE): Truncate the value so that it is aligned to a `_*'
> - byte boundary.
> + align_*(VALUE, BYTES): Round the value so that it is aligned to a
> + BYTES boundary.
>
> ROT*(VALUE, NR_BITS): Return the `*' bit VALUE rotated by NR_BITS
> right (positive) or left (negative).
> @@ -525,14 +522,8 @@ INLINE_SIM_BITS(unsigned_word) MSINSERTED (unsigned_word val, int start, int sto
>
>
> /* memory alignment macro's */
> -#define _ALIGNa(A,X) (((X) + ((A) - 1)) & ~((A) - 1))
> -#define _FLOORa(A,X) ((X) & ~((A) - 1))
> -
> -#define ALIGN_8(X) _ALIGNa (8, X)
> -#define ALIGN_16(X) _ALIGNa (16, X)
> -
> -#define ALIGN_PAGE(X) _ALIGNa (0x1000, X)
> -#define FLOOR_PAGE(X) ((X) & ~(0x1000 - 1))
> +#define align_up(v, n) (((v) + (n) - 1) & -(n))
> +#define align_down(v, n) ((v) & -(n))
>
>
> /* bit bliting macro's */
> --
> 2.28.0
>
prev parent reply other threads:[~2020-12-09 10:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-09 6:45 Mike Frysinger via Gdb-patches
2020-12-09 10:53 ` Andrew Burgess [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201209105324.GA2945@embecosm.com \
--to=andrew.burgess@embecosm.com \
--cc=gdb-patches@sourceware.org \
--cc=vapier@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox