From: "Tom Tromey (Code Review)" <gerrit@gnutoolchain-gerrit.osci.io>
To: Luis Machado <luis.machado@linaro.org>,
Simon Marchi <simon.marchi@polymtl.ca>,
gdb-patches@sourceware.org
Subject: [review v2] Share windows_thread_info between gdb and gdbserver
Date: Tue, 26 Nov 2019 17:11:00 -0000 [thread overview]
Message-ID: <20191126171130.D929B28174@gnutoolchain-gerrit.osci.io> (raw)
In-Reply-To: <gerrit.1572371871000.I9ba2d1b94be1550ea2e75e977d0808c7a27e2223@gnutoolchain-gerrit.osci.io>
Change URL: https://gnutoolchain-gerrit.osci.io/r/c/binutils-gdb/+/407
......................................................................
Share windows_thread_info between gdb and gdbserver
This introduces a new file, nat/windows-nat.h, which holds the
definition of windows_thread_info. This is now shared between gdb and
gdbserver.
Note that the two implementations different slightly. gdb had a
couple of fields ("name" and "reload_context") that gdbserver did not;
while gdbserver had one field ("base_context") that gdb did not, plus
better comments. The new file preserves all the fields, and the
comments.
gdb/ChangeLog
2019-11-26 Tom Tromey <tromey@adacore.com>
* windows-nat.c (struct windows_thread_info): Remove.
* nat/windows-nat.h: New file.
gdb/gdbserver/ChangeLog
2019-11-26 Tom Tromey <tromey@adacore.com>
* win32-low.h (struct windows_thread_info): Remove.
Change-Id: I9ba2d1b94be1550ea2e75e977d0808c7a27e2223
---
M gdb/ChangeLog
M gdb/gdbserver/ChangeLog
M gdb/gdbserver/win32-low.h
A gdb/nat/windows-nat.h
M gdb/windows-nat.c
5 files changed, 69 insertions(+), 42 deletions(-)
diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 5eb664f..e24159a 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,10 @@
2019-11-26 Tom Tromey <tromey@adacore.com>
+ * windows-nat.c (struct windows_thread_info): Remove.
+ * nat/windows-nat.h: New file.
+
+2019-11-26 Tom Tromey <tromey@adacore.com>
+
* windows-nat.c (struct windows_thread_info) <tid>: Rename from "id".
(thread_rec, windows_add_thread, windows_delete_thread)
(windows_continue): Update.
diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog
index 596bedb..8c0c8ba 100644
--- a/gdb/gdbserver/ChangeLog
+++ b/gdb/gdbserver/ChangeLog
@@ -1,5 +1,9 @@
2019-11-26 Tom Tromey <tromey@adacore.com>
+ * win32-low.h (struct windows_thread_info): Remove.
+
+2019-11-26 Tom Tromey <tromey@adacore.com>
+
* win32-low.h (struct windows_thread_info): Rename from
win32_thread_info. Remove typedef.
(struct win32_target_ops, win32_require_context): Update.
diff --git a/gdb/gdbserver/win32-low.h b/gdb/gdbserver/win32-low.h
index 192e177..342411d 100644
--- a/gdb/gdbserver/win32-low.h
+++ b/gdb/gdbserver/win32-low.h
@@ -20,6 +20,7 @@
#define GDBSERVER_WIN32_LOW_H
#include <windows.h>
+#include "nat/windows-nat.h"
struct target_desc;
@@ -27,35 +28,6 @@
Windows ports support neither bi-arch nor multi-process. */
extern const struct target_desc *win32_tdesc;
-/* Thread information structure used to track extra information about
- each thread. */
-struct windows_thread_info
-{
- /* The Win32 thread identifier. */
- DWORD tid;
-
- /* The handle to the thread. */
- HANDLE h;
-
- /* Thread Information Block address. */
- CORE_ADDR thread_local_base;
-
- /* Non zero if SuspendThread was called on this thread. */
- int suspended;
-
-#ifdef _WIN32_WCE
- /* The context as retrieved right after suspending the thread. */
- CONTEXT base_context;
-#endif
-
- /* The context of the thread, including any manipulations. */
- CONTEXT context;
-
- /* Whether debug registers changed since we last set CONTEXT back to
- the thread. */
- int debug_registers_changed;
-};
-
struct win32_target_ops
{
/* Architecture-specific setup. */
diff --git a/gdb/nat/windows-nat.h b/gdb/nat/windows-nat.h
new file mode 100644
index 0000000..30fce27
--- /dev/null
+++ b/gdb/nat/windows-nat.h
@@ -0,0 +1,58 @@
+/* Internal interfaces for the Windows code
+ Copyright (C) 1995-2019 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#ifndef NAT_WINDOWS_NAT_H
+#define NAT_WINDOWS_NAT_H
+
+/* Thread information structure used to track extra information about
+ each thread. */
+struct windows_thread_info
+{
+ /* The Win32 thread identifier. */
+ DWORD tid;
+
+ /* The handle to the thread. */
+ HANDLE h;
+
+ /* Thread Information Block address. */
+ CORE_ADDR thread_local_base;
+
+ /* Non zero if SuspendThread was called on this thread. */
+ int suspended;
+
+#ifdef _WIN32_WCE
+ /* The context as retrieved right after suspending the thread. */
+ CONTEXT base_context;
+#endif
+
+ /* The context of the thread, including any manipulations. */
+ CONTEXT context;
+
+ /* Whether debug registers changed since we last set CONTEXT back to
+ the thread. */
+ int debug_registers_changed;
+
+ /* Nonzero if CONTEXT is invalidated and must be re-read from the
+ inferior thread. */
+ int reload_context;
+
+ /* The name of the thread, allocated by xmalloc. */
+ char *name;
+};
+
+#endif
diff --git a/gdb/windows-nat.c b/gdb/windows-nat.c
index 06514d0..f6d4010 100644
--- a/gdb/windows-nat.c
+++ b/gdb/windows-nat.c
@@ -69,6 +69,7 @@
#include "inf-child.h"
#include "gdbsupport/gdb_tilde_expand.h"
#include "gdbsupport/pathstuff.h"
+#include "nat/windows-nat.h"
#define AdjustTokenPrivileges dyn_AdjustTokenPrivileges
#define DebugActiveProcessStop dyn_DebugActiveProcessStop
@@ -213,19 +214,6 @@
static enum gdb_signal last_sig = GDB_SIGNAL_0;
/* Set if a signal was received from the debugged process. */
-/* Thread information structure used to track information that is
- not available in gdb's thread structure. */
-struct windows_thread_info
- {
- DWORD tid;
- HANDLE h;
- CORE_ADDR thread_local_base;
- char *name;
- int suspended;
- int reload_context;
- CONTEXT context;
- };
-
static std::vector<windows_thread_info *> thread_list;
/* The process and thread handles for the above context. */
--
Gerrit-Project: binutils-gdb
Gerrit-Branch: master
Gerrit-Change-Id: I9ba2d1b94be1550ea2e75e977d0808c7a27e2223
Gerrit-Change-Number: 407
Gerrit-PatchSet: 2
Gerrit-Owner: Tom Tromey <tromey@sourceware.org>
Gerrit-Reviewer: Luis Machado <luis.machado@linaro.org>
Gerrit-Reviewer: Simon Marchi <simon.marchi@polymtl.ca>
Gerrit-MessageType: newpatchset
next prev parent reply other threads:[~2019-11-26 17:11 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 17:58 [review] " Tom Tromey (Code Review)
2019-10-31 3:54 ` Luis Machado (Code Review)
2019-10-31 4:01 ` Luis Machado (Code Review)
2019-10-31 18:13 ` Simon Marchi (Code Review)
2019-11-26 17:11 ` Tom Tromey (Code Review) [this message]
2019-11-29 17:54 ` [review v2] " Pedro Alves (Code Review)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191126171130.D929B28174@gnutoolchain-gerrit.osci.io \
--to=gerrit@gnutoolchain-gerrit.osci.io \
--cc=gdb-patches@sourceware.org \
--cc=luis.machado@linaro.org \
--cc=simon.marchi@polymtl.ca \
--cc=tromey@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox