From: Andrew Burgess <andrew.burgess@embecosm.com>
To: Alan Modra <amodra@gmail.com>
Cc: binutils@sourceware.org, gdb-patches@sourceware.org
Subject: Re: bfd_section_* macros
Date: Wed, 18 Sep 2019 15:19:00 -0000 [thread overview]
Message-ID: <20190918151948.GB4962@embecosm.com> (raw)
In-Reply-To: <20190918141437.GJ3685@bubble.grove.modra.org>
* Alan Modra <amodra@gmail.com> [2019-09-18 23:44:37 +0930]:
> This large patch removes the unnecessary bfd parameter from various
> bfd section macros and functions. The bfd is hardly ever used and if
> needed for the bfd_set_section_* or bfd_rename_section functions can
> be found via section->owner except for the com, und, abs, and ind
> std_section special sections. Those sections shouldn't be modified
> anyway.
>
> The patch also removes various bfd_get_section_<field> macros,
> replacing their use with bfd_section_<field>, and adds
> bfd_set_section_lma. I've also fixed a minor bug in gas where
> compressed section renaming was done directly rather than calling
> bfd_rename_section. This would have broken bfd_get_section_by_name
> and similar functions, but that hardly mattered at such a late stage
> in gas processing.
>
> Tested with my usual set of binutils targets, gdb --enable-targets=all
> and by building one of each of the sims (minus sh64 which is obsoleted
> by removal of the necessary bfd support).
>
> I'd like an approval from one of the gdb maintainers before I go
> ahead and commit this.
I took a look through the GDB parts of this patch, and it all looks
good to me. This feels like a nice cleanup.
Thanks,
Andrew
>
> bfd/
> * bfd-in.h (bfd_get_section_name, bfd_get_section_vma),
> (bfd_get_section_lma, bfd_get_section_alignment),
> (bfd_get_section_size, bfd_get_section_flags),
> (bfd_get_section_userdata): Delete.
> (bfd_section_name, bfd_section_size, bfd_section_vma),
> (bfd_section_lma, bfd_section_alignment): Lose bfd parameter.
> (bfd_section_flags, bfd_section_userdata): New.
> (bfd_is_com_section): Rename parameter.
> * section.c (bfd_set_section_userdata, bfd_set_section_vma),
> (bfd_set_section_alignment, bfd_set_section_flags, bfd_rename_section),
> (bfd_set_section_size): Delete bfd parameter, rename section parameter.
> (bfd_set_section_lma): New.
> * bfd-in2.h: Regenerate.
> * mach-o.c (bfd_mach_o_init_section_from_mach_o): Delete bfd param,
> update callers.
> * aoutx.h, * bfd.c, * coff-alpha.c, * coff-arm.c, * coff-mips.c,
> * coff64-rs6000.c, * coffcode.h, * coffgen.c, * cofflink.c,
> * compress.c, * ecoff.c, * elf-eh-frame.c, * elf-hppa.h,
> * elf-ifunc.c, * elf-m10200.c, * elf-m10300.c, * elf-properties.c,
> * elf-s390-common.c, * elf-vxworks.c, * elf.c, * elf32-arc.c,
> * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c,
> * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-csky.c,
> * elf32-d10v.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c,
> * elf32-ft32.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i386.c,
> * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c,
> * elf32-m32r.c, * elf32-m68hc1x.c, * elf32-m68k.c, * elf32-mcore.c,
> * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c,
> * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c,
> * elf32-nios2.c, * elf32-or1k.c, * elf32-ppc.c, * elf32-pru.c,
> * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c,
> * elf32-score7.c, * elf32-sh.c, * elf32-spu.c, * elf32-tic6x.c,
> * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-visium.c,
> * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c,
> * elf64-bpf.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mmix.c,
> * elf64-ppc.c, * elf64-s390.c, * elf64-sparc.c, * elf64-x86-64.c,
> * elflink.c, * elfnn-aarch64.c, * elfnn-ia64.c, * elfnn-riscv.c,
> * elfxx-aarch64.c, * elfxx-mips.c, * elfxx-sparc.c,
> * elfxx-tilegx.c, * elfxx-x86.c, * i386msdos.c, * linker.c,
> * mach-o.c, * mmo.c, * opncls.c, * pdp11.c, * pei-x86_64.c,
> * peicode.h, * reloc.c, * section.c, * syms.c, * vms-alpha.c,
> * xcofflink.c: Update throughout for bfd section macro and function
> changes.
> binutils/
> * addr2line.c, * bucomm.c, * coffgrok.c, * dlltool.c, * nm.c,
> * objcopy.c, * objdump.c, * od-elf32_avr.c, * od-macho.c,
> * od-xcoff.c, * prdbg.c, * rdcoff.c, * rddbg.c, * rescoff.c,
> * resres.c, * size.c, * srconv.c, * strings.c, * windmc.c: Update
> throughout for bfd section macro and function changes.
> gas/
> * as.c, * as.h, * dw2gencfi.c, * dwarf2dbg.c, * ecoff.c,
> * read.c, * stabs.c, * subsegs.c, * subsegs.h, * write.c,
> * config/obj-coff-seh.c, * config/obj-coff.c, * config/obj-ecoff.c,
> * config/obj-elf.c, * config/obj-macho.c, * config/obj-som.c,
> * config/tc-aarch64.c, * config/tc-alpha.c, * config/tc-arc.c,
> * config/tc-arm.c, * config/tc-avr.c, * config/tc-bfin.c,
> * config/tc-bpf.c, * config/tc-d10v.c, * config/tc-d30v.c,
> * config/tc-epiphany.c, * config/tc-fr30.c, * config/tc-frv.c,
> * config/tc-h8300.c, * config/tc-hppa.c, * config/tc-i386.c,
> * config/tc-ia64.c, * config/tc-ip2k.c, * config/tc-iq2000.c,
> * config/tc-lm32.c, * config/tc-m32c.c, * config/tc-m32r.c,
> * config/tc-m68hc11.c, * config/tc-mep.c, * config/tc-microblaze.c,
> * config/tc-mips.c, * config/tc-mmix.c, * config/tc-mn10200.c,
> * config/tc-mn10300.c, * config/tc-msp430.c, * config/tc-mt.c,
> * config/tc-nds32.c, * config/tc-or1k.c, * config/tc-ppc.c,
> * config/tc-pru.c, * config/tc-rl78.c, * config/tc-rx.c,
> * config/tc-s12z.c, * config/tc-s390.c, * config/tc-score.c,
> * config/tc-score7.c, * config/tc-sh.c, * config/tc-sparc.c,
> * config/tc-spu.c, * config/tc-tic4x.c, * config/tc-tic54x.c,
> * config/tc-tic6x.c, * config/tc-tilegx.c, * config/tc-tilepro.c,
> * config/tc-v850.c, * config/tc-visium.c, * config/tc-wasm32.c,
> * config/tc-xc16x.c, * config/tc-xgate.c, * config/tc-xstormy16.c,
> * config/tc-xtensa.c, * config/tc-z8k.c: Update throughout for
> bfd section macro and function changes.
> * write.c (compress_debug): Use bfd_rename_section.
> gdb/
> * aarch64-linux-tdep.c, * arm-tdep.c, * auto-load.c,
> * coff-pe-read.c, * coffread.c, * corelow.c, * dbxread.c,
> * dicos-tdep.c, * dwarf2-frame.c, * dwarf2read.c, * elfread.c,
> * exec.c, * fbsd-tdep.c, * gcore.c, * gdb_bfd.c, * gdb_bfd.h,
> * hppa-tdep.c, * i386-cygwin-tdep.c, * i386-fbsd-tdep.c,
> * i386-linux-tdep.c, * jit.c, * linux-tdep.c, * machoread.c,
> * maint.c, * mdebugread.c, * minidebug.c, * mips-linux-tdep.c,
> * mips-sde-tdep.c, * mips-tdep.c, * mipsread.c, * nto-tdep.c,
> * objfiles.c, * objfiles.h, * osabi.c, * ppc-linux-tdep.c,
> * ppc64-tdep.c, * record-btrace.c, * record-full.c, * remote.c,
> * rs6000-aix-tdep.c, * rs6000-tdep.c, * s390-linux-tdep.c,
> * s390-tdep.c, * solib-aix.c, * solib-dsbt.c, * solib-frv.c,
> * solib-spu.c, * solib-svr4.c, * solib-target.c,
> * spu-linux-nat.c, * spu-tdep.c, * symfile-mem.c, * symfile.c,
> * symmisc.c, * symtab.c, * target.c, * windows-nat.c,
> * xcoffread.c, * cli/cli-dump.c, * compile/compile-object-load.c,
> * mi/mi-interp.c: Update throughout for bfd section macro and
> function changes.
> * gcore (gcore_create_callback): Use bfd_set_section_lma.
> * spu-tdep.c (spu_overlay_new_objfile): Likewise.
> gprof/
> * corefile.c, * symtab.c: Update throughout for bfd section
> macro and function changes.
> ld/
> * ldcref.c, * ldctor.c, * ldelf.c, * ldlang.c, * pe-dll.c,
> * emultempl/aarch64elf.em, * emultempl/aix.em,
> * emultempl/armcoff.em, * emultempl/armelf.em,
> * emultempl/cr16elf.em, * emultempl/cskyelf.em,
> * emultempl/m68hc1xelf.em, * emultempl/m68kelf.em,
> * emultempl/mipself.em, * emultempl/mmix-elfnmmo.em,
> * emultempl/mmo.em, * emultempl/msp430.em,
> * emultempl/nios2elf.em, * emultempl/pe.em, * emultempl/pep.em,
> * emultempl/ppc64elf.em, * emultempl/xtensaelf.em: Update
> throughout for bfd section macro and function changes.
> libctf/
> * ctf-open-bfd.c: Update throughout for bfd section macro changes.
> opcodes/
> * arc-ext.c: Update throughout for bfd section macro changes.
> sim/
> * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
> * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
> * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
> * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
> * rx/trace.c: Update throughout for bfd section macro changes.
>
> --
> Alan Modra
> Australia Development Lab, IBM
next prev parent reply other threads:[~2019-09-18 15:19 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-18 14:14 Alan Modra
2019-09-18 14:18 ` Alan Modra
2019-09-18 15:19 ` Andrew Burgess [this message]
2019-09-19 0:49 ` Alan Modra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190918151948.GB4962@embecosm.com \
--to=andrew.burgess@embecosm.com \
--cc=amodra@gmail.com \
--cc=binutils@sourceware.org \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox