From: Tom Tromey <tom@tromey.com>
To: gdb-patches@sourceware.org
Cc: Tom Tromey <tom@tromey.com>
Subject: [RFA 30/42] Remove buildsym_init
Date: Wed, 23 May 2018 08:49:00 -0000 [thread overview]
Message-ID: <20180523045851.11660-31-tom@tromey.com> (raw)
In-Reply-To: <20180523045851.11660-1-tom@tromey.com>
Now that buildsym_init does nothing, it can be removed.
gdb/ChangeLog
2018-05-22 Tom Tromey <tom@tromey.com>
* xcoffread.c (xcoff_psymtab_to_symtab_1): Update.
(xcoff_new_init): Update.
* mipsread.c (mipscoff_new_init): Update.
* mdebugread.c (mdebug_build_psymtabs): Update.
* elfread.c (elf_new_init): Update.
* dwarf2read.c (process_full_comp_unit, process_full_type_unit):
Update.
* dbxread.c (dbx_new_init, dbx_psymtab_to_symtab_1)
(coffstab_build_psymtabs, elfstab_build_psymtabs)
(stabsect_build_psymtabs): Update.
* buildsym.h (buildsym_init): Don't declare.
* buildsym.c: Update comment.
(prepare_for_building): Remove.
(start_symtab, restart_symtab): Update.
(reset_symtab_globals): Update comment.
(buildsym_init): Remove.
---
gdb/ChangeLog | 19 +++++++++++++++++++
gdb/buildsym.c | 42 +++++++-----------------------------------
gdb/buildsym.h | 2 --
gdb/dbxread.c | 5 -----
gdb/dwarf2read.c | 2 --
gdb/elfread.c | 1 -
gdb/mdebugread.c | 1 -
gdb/mipsread.c | 1 -
gdb/xcoffread.c | 2 --
9 files changed, 26 insertions(+), 49 deletions(-)
diff --git a/gdb/buildsym.c b/gdb/buildsym.c
index 0e21cfd83a..fec06f3d88 100644
--- a/gdb/buildsym.c
+++ b/gdb/buildsym.c
@@ -25,7 +25,6 @@
The basic way this module is used is as follows:
- buildsym_init ();
scoped_free_pendings free_pending;
cust = start_symtab (...);
... read debug info ...
@@ -40,7 +39,6 @@
Reading DWARF Type Units is another variation:
- buildsym_init ();
scoped_free_pendings free_pending;
cust = start_symtab (...);
... read debug info ...
@@ -49,7 +47,6 @@
And then reading subsequent Type Units within the containing "Comp Unit"
will use a second flow:
- buildsym_init ();
scoped_free_pendings free_pending;
cust = restart_symtab (...);
... read debug info ...
@@ -57,7 +54,6 @@
dbxread.c and xcoffread.c use another variation:
- buildsym_init ();
scoped_free_pendings free_pending;
cust = start_symtab (...);
... read debug info ...
@@ -1000,19 +996,6 @@ get_macro_table (void)
return buildsym_compunit->get_macro_table ();
}
\f
-/* Init state to prepare for building a symtab.
- Note: This can't be done in buildsym_init because dbxread.c and xcoffread.c
- can call start_symtab+end_symtab multiple times after one call to
- buildsym_init. */
-
-static void
-prepare_for_building ()
-{
- /* These should have been reset either by successful completion of building
- a symtab, or by the scoped_free_pendings destructor. */
- gdb_assert (buildsym_compunit == nullptr);
-}
-
/* Start a new symtab for a new source file in OBJFILE. Called, for example,
when a stabs symbol of type N_SO is seen, or when a DWARF
TAG_compile_unit DIE is seen. It indicates the start of data for
@@ -1029,7 +1012,9 @@ struct compunit_symtab *
start_symtab (struct objfile *objfile, const char *name, const char *comp_dir,
CORE_ADDR start_addr, enum language language)
{
- prepare_for_building ();
+ /* These should have been reset either by successful completion of building
+ a symtab, or by the scoped_free_pendings destructor. */
+ gdb_assert (buildsym_compunit == nullptr);
buildsym_compunit = new struct buildsym_compunit (objfile, name, comp_dir,
language, start_addr);
@@ -1066,7 +1051,9 @@ void
restart_symtab (struct compunit_symtab *cust,
const char *name, CORE_ADDR start_addr)
{
- prepare_for_building ();
+ /* These should have been reset either by successful completion of building
+ a symtab, or by the scoped_free_pendings destructor. */
+ gdb_assert (buildsym_compunit == nullptr);
buildsym_compunit
= new struct buildsym_compunit (COMPUNIT_OBJFILE (cust),
@@ -1150,11 +1137,7 @@ watch_main_source_file_lossage (void)
}
}
-/* Reset state after a successful building of a symtab.
- This exists because dbxread.c and xcoffread.c can call
- start_symtab+end_symtab multiple times after one call to buildsym_init,
- and before the scoped_free_pendings destructor is called.
- We keep the free_pendings list around for dbx/xcoff sake. */
+/* Reset state after a successful building of a symtab. */
static void
reset_symtab_globals (void)
@@ -1767,14 +1750,3 @@ get_global_symbols ()
gdb_assert (buildsym_compunit != nullptr);
return &buildsym_compunit->m_global_symbols;
}
-
-\f
-
-/* Initialize anything that needs initializing when starting to read a
- fresh piece of a symbol file, e.g. reading in the stuff
- corresponding to a psymtab. */
-
-void
-buildsym_init ()
-{
-}
diff --git a/gdb/buildsym.h b/gdb/buildsym.h
index 71d133e6ad..b6d16876d6 100644
--- a/gdb/buildsym.h
+++ b/gdb/buildsym.h
@@ -171,8 +171,6 @@ extern struct compunit_symtab *end_expandable_symtab (CORE_ADDR end_addr,
extern void augment_type_symtab (void);
-extern void buildsym_init ();
-
extern struct context_stack *push_context (int desc, CORE_ADDR valu);
extern struct context_stack *pop_context (void);
diff --git a/gdb/dbxread.c b/gdb/dbxread.c
index 989ce77be2..d660157a61 100644
--- a/gdb/dbxread.c
+++ b/gdb/dbxread.c
@@ -568,7 +568,6 @@ static void
dbx_new_init (struct objfile *ignore)
{
stabsread_new_init ();
- buildsym_init ();
init_header_files ();
}
@@ -2224,7 +2223,6 @@ dbx_psymtab_to_symtab_1 (struct objfile *objfile, struct partial_symtab *pst)
{
/* Init stuff necessary for reading in symbols */
stabsread_init ();
- buildsym_init ();
scoped_free_pendings free_pending;
file_string_table_offset = FILE_STRING_OFFSET (pst);
symbol_size = SYMBOL_SIZE (pst);
@@ -3103,7 +3101,6 @@ coffstab_build_psymtabs (struct objfile *objfile,
perror_with_name (name);
stabsread_new_init ();
- buildsym_init ();
free_header_files ();
init_header_files ();
@@ -3192,7 +3189,6 @@ elfstab_build_psymtabs (struct objfile *objfile, asection *stabsect,
perror_with_name (name);
stabsread_new_init ();
- buildsym_init ();
free_header_files ();
init_header_files ();
@@ -3292,7 +3288,6 @@ stabsect_build_psymtabs (struct objfile *objfile, char *stab_name,
perror_with_name (name);
stabsread_new_init ();
- buildsym_init ();
free_header_files ();
init_header_files ();
diff --git a/gdb/dwarf2read.c b/gdb/dwarf2read.c
index b73f13bb19..9753a5b57d 100644
--- a/gdb/dwarf2read.c
+++ b/gdb/dwarf2read.c
@@ -10275,7 +10275,6 @@ process_full_comp_unit (struct dwarf2_per_cu_data *per_cu,
baseaddr = ANOFFSET (objfile->section_offsets, SECT_OFF_TEXT (objfile));
- buildsym_init ();
scoped_free_pendings free_pending;
/* Clear the list here in case something was left over. */
@@ -10378,7 +10377,6 @@ process_full_type_unit (struct dwarf2_per_cu_data *per_cu,
gdb_assert (per_cu->is_debug_types);
sig_type = (struct signatured_type *) per_cu;
- buildsym_init ();
scoped_free_pendings free_pending;
/* Clear the list here in case something was left over. */
diff --git a/gdb/elfread.c b/gdb/elfread.c
index 8978f15e88..9bbd0c85e4 100644
--- a/gdb/elfread.c
+++ b/gdb/elfread.c
@@ -1325,7 +1325,6 @@ static void
elf_new_init (struct objfile *ignore)
{
stabsread_new_init ();
- buildsym_init ();
}
/* Perform any local cleanups required when we are done with a particular
diff --git a/gdb/mdebugread.c b/gdb/mdebugread.c
index 1045426c67..466e36599b 100644
--- a/gdb/mdebugread.c
+++ b/gdb/mdebugread.c
@@ -345,7 +345,6 @@ mdebug_build_psymtabs (minimal_symbol_reader &reader,
debug_info = info;
stabsread_new_init ();
- buildsym_init ();
free_header_files ();
init_header_files ();
diff --git a/gdb/mipsread.c b/gdb/mipsread.c
index 3bdc50733d..52130dab20 100644
--- a/gdb/mipsread.c
+++ b/gdb/mipsread.c
@@ -54,7 +54,6 @@ static void
mipscoff_new_init (struct objfile *ignore)
{
stabsread_new_init ();
- buildsym_init ();
}
/* Initialize to read a symbol file (nothing to do). */
diff --git a/gdb/xcoffread.c b/gdb/xcoffread.c
index 4ccc5bf7fc..6b561a82b3 100644
--- a/gdb/xcoffread.c
+++ b/gdb/xcoffread.c
@@ -1875,7 +1875,6 @@ xcoff_psymtab_to_symtab_1 (struct objfile *objfile, struct partial_symtab *pst)
{
/* Init stuff necessary for reading in symbols. */
stabsread_init ();
- buildsym_init ();
scoped_free_pendings free_pending;
read_xcoff_symtab (objfile, pst);
@@ -1927,7 +1926,6 @@ static void
xcoff_new_init (struct objfile *objfile)
{
stabsread_new_init ();
- buildsym_init ();
}
/* Do initialization in preparation for reading symbols from OBJFILE.
--
2.13.6
next prev parent reply other threads:[~2018-05-23 6:16 UTC|newest]
Thread overview: 129+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 4:59 [RFA 00/42] Remove globals from buildsym Tom Tromey
2018-05-23 4:59 ` [RFA 04/42] Move last_source file to buildsym_compunit Tom Tromey
2018-07-07 3:51 ` Simon Marchi
2018-07-08 16:33 ` Tom Tromey
2018-07-08 16:37 ` Simon Marchi
2018-07-08 16:52 ` Tom Tromey
2018-07-08 17:01 ` Simon Marchi
2018-05-23 4:59 ` [RFA 10/42] Move some code from buildsym to stabsread Tom Tromey
2018-07-05 19:16 ` Keith Seitz
2018-07-08 16:35 ` Simon Marchi
2018-07-08 16:59 ` Tom Tromey
2018-07-08 16:37 ` Tom Tromey
2018-05-23 4:59 ` [RFA 07/42] Move last_source_start_addr to buildsym_compunit Tom Tromey
2018-07-08 16:10 ` Simon Marchi
2018-05-23 4:59 ` [RFA 26/42] Remove free_pendings Tom Tromey
2018-07-10 2:55 ` Simon Marchi
2018-07-10 3:16 ` Simon Marchi
2018-05-23 4:59 ` [RFA 09/42] Make context_stack_size static in buildsym.c Tom Tromey
2018-07-08 16:16 ` Simon Marchi
2018-05-23 4:59 ` [RFA 12/42] Move within_function to stabsread Tom Tromey
2018-07-08 16:49 ` Simon Marchi
2018-05-23 4:59 ` [RFA 14/42] Move scan_file_globals declaration to stabsread.h Tom Tromey
2018-07-08 16:52 ` Simon Marchi
2018-07-09 23:07 ` Tom Tromey
2018-05-23 4:59 ` [RFA 23/42] Move pending addrmap globals to buildsym_compunit Tom Tromey
2018-07-10 1:56 ` Simon Marchi
2018-07-12 4:35 ` Tom Tromey
2018-05-23 4:59 ` [RFA 01/42] Use new and delete for buildsym_compunit Tom Tromey
2018-07-05 18:50 ` Keith Seitz
2018-07-07 2:31 ` Simon Marchi
2018-07-08 16:25 ` Tom Tromey
2018-05-23 4:59 ` [RFA 28/42] Set list_in_scope later in DWARF reader Tom Tromey
2018-07-06 18:11 ` Keith Seitz
2018-07-10 3:23 ` Simon Marchi
2018-07-15 17:55 ` Tom Tromey
2018-05-23 4:59 ` [RFA 29/42] Move the symbol lists to buildsym_compunit Tom Tromey
2018-07-06 18:35 ` Keith Seitz
2018-07-12 4:45 ` Tom Tromey
2018-07-10 3:38 ` Simon Marchi
2018-07-15 17:44 ` Tom Tromey
2018-05-23 4:59 ` [RFA 03/42] Add assert in prepare_for_building Tom Tromey
2018-07-07 14:06 ` Simon Marchi
2018-05-23 4:59 ` [RFA 20/42] Use outermost_context_p in more places Tom Tromey
2018-07-08 17:13 ` Simon Marchi
2018-05-23 4:59 ` [RFA 15/42] Remove merge_symbol_lists Tom Tromey
2018-07-08 16:54 ` Simon Marchi
2018-05-23 4:59 ` [RFA 17/42] Move the subfile stack to buildsym_compunit Tom Tromey
2018-07-08 16:59 ` Simon Marchi
2018-05-23 4:59 ` [RFA 13/42] Remove buildsym_new_init Tom Tromey
2018-07-08 16:51 ` Simon Marchi
2018-05-23 4:59 ` [RFA 18/42] Make free_pending_blocks static Tom Tromey
2018-07-08 17:04 ` Simon Marchi
2018-05-23 4:59 ` [RFA 21/42] Move the context stack to buildsym_compunit Tom Tromey
2018-07-06 17:30 ` Keith Seitz
2018-07-15 18:09 ` Tom Tromey
[not found] ` <93a9597f-e7ff-e8ff-e873-9cee5b84d7cc@simark.ca>
2018-07-10 1:45 ` Simon Marchi
2018-07-15 18:10 ` Tom Tromey
2018-05-23 4:59 ` [RFA 02/42] Change buildsym_compunit::comp_dir to be a unique_xmalloc_ptr Tom Tromey
2018-07-07 2:34 ` Simon Marchi
2018-05-23 4:59 ` [RFA 05/42] Move pending_macros to buildsym_compunit Tom Tromey
2018-07-07 15:41 ` Simon Marchi
2018-07-08 16:35 ` Tom Tromey
2018-05-23 4:59 ` [RFA 16/42] Use gdb_assert in two places in buildsym.c Tom Tromey
2018-07-08 16:55 ` Simon Marchi
2018-07-09 23:13 ` Tom Tromey
2018-05-23 4:59 ` [RFA 25/42] Remove the "listhead" argument from finish_block Tom Tromey
2018-07-10 2:07 ` Simon Marchi
2018-05-23 4:59 ` [RFA 22/42] Move current_subfile to buildsym_compunit Tom Tromey
2018-07-10 1:52 ` Simon Marchi
2018-07-12 4:34 ` Tom Tromey
2018-05-23 4:59 ` [RFA 27/42] Do not look at file symbols when reading psymtabs Tom Tromey
2018-07-10 3:19 ` Simon Marchi
2018-05-23 4:59 ` [RFA 08/42] Move processing_acc_compilation to dbxread.c Tom Tromey
2018-07-08 16:15 ` Simon Marchi
2018-05-23 4:59 ` [RFA 06/42] Move have_line_numbers to buildsym_compunit Tom Tromey
2018-07-05 19:01 ` Keith Seitz
2018-07-08 16:05 ` Simon Marchi
2018-07-08 16:26 ` Tom Tromey
2018-05-23 4:59 ` [RFA 19/42] Move the using directives " Tom Tromey
2018-07-05 20:14 ` Keith Seitz
2018-07-08 16:28 ` Tom Tromey
2018-07-08 17:08 ` Simon Marchi
2018-05-23 6:16 ` [RFA 39/42] Parameterize cp_scan_for_anonymous_namespaces Tom Tromey
2018-07-06 19:23 ` Keith Seitz
2018-07-08 16:40 ` Tom Tromey
2018-07-10 4:25 ` Simon Marchi
2018-05-23 6:16 ` [RFA 32/42] Remove EXTERN from buildsym.h Tom Tromey
2018-07-10 3:44 ` Simon Marchi
2018-05-23 6:16 ` [RFA 41/42] Remove some unused buildsym functions Tom Tromey
2018-07-10 4:37 ` Simon Marchi
2018-05-23 6:16 ` [RFA 42/42] Remove record_line_ftype Tom Tromey
2018-07-10 4:38 ` Simon Marchi
2018-05-23 6:16 ` [RFA 11/42] Move processing_gcc to stabsread Tom Tromey
2018-07-08 16:46 ` Simon Marchi
2018-07-08 16:56 ` Tom Tromey
2018-05-23 6:16 ` [RFA 33/42] Remove parameter from record_pending_block Tom Tromey
2018-07-10 3:49 ` Simon Marchi
2018-05-23 6:16 ` [RFA 40/42] Convert the DWARF reader to new-style buildysm Tom Tromey
2018-07-06 20:10 ` Keith Seitz
2018-07-10 4:36 ` Simon Marchi
2018-07-15 17:38 ` Tom Tromey
2018-05-23 6:16 ` [RFA 37/42] Move struct buildsym_compunit to buildsym.h Tom Tromey
2018-07-10 4:15 ` Simon Marchi
2018-05-23 6:16 ` [RFA 34/42] Add many methods to buildsym_compunit Tom Tromey
2018-07-06 19:16 ` Keith Seitz
2018-07-08 16:39 ` Tom Tromey
2018-07-10 4:08 ` Simon Marchi
2018-07-10 4:12 ` Simon Marchi
2018-07-10 4:08 ` Simon Marchi
2018-07-12 5:18 ` Tom Tromey
2018-05-23 6:16 ` [RFA 35/42] Do not use buildsym.h in some files Tom Tromey
2018-07-10 4:10 ` Simon Marchi
2018-05-23 6:16 ` [RFA 36/42] Remove reset_symtab_globals Tom Tromey
2018-07-10 4:11 ` Simon Marchi
2018-05-23 6:16 ` [RFA 31/42] Remove a TODO Tom Tromey
2018-07-10 3:42 ` Simon Marchi
2018-05-23 6:16 ` [RFA 24/42] Move pending_blocks and pending_block_obstack to buildsym_compunit Tom Tromey
2018-07-10 2:05 ` Simon Marchi
2018-07-12 4:39 ` Tom Tromey
2018-07-12 5:03 ` Tom Tromey
2018-05-23 7:31 ` [RFA 38/42] Introduce legacy-buildsym.h Tom Tromey
2018-07-10 4:22 ` Simon Marchi
2018-07-15 18:43 ` Tom Tromey
2018-07-15 19:46 ` Simon Marchi
2018-07-16 0:22 ` Tom Tromey
2018-05-23 8:49 ` Tom Tromey [this message]
2018-07-10 3:41 ` [RFA 30/42] Remove buildsym_init Simon Marchi
2018-06-18 14:46 ` [RFA 00/42] Remove globals from buildsym Tom Tromey
2018-07-05 18:21 ` Keith Seitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180523045851.11660-31-tom@tromey.com \
--to=tom@tromey.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox