From: Mark Kettenis <mark.kettenis@xs4all.nl>
To: raunaq12@in.ibm.com
Cc: gdb-patches@sourceware.org, tromey@redhat.com
Subject: Re: [PATCH 5/5] make calls to ptrace64 in aix-thread.c when defined
Date: Wed, 07 Aug 2013 11:38:00 -0000 [thread overview]
Message-ID: <201308071137.r77BbZ4G010318@glazunov.sibelius.xs4all.nl> (raw)
In-Reply-To: <OFE045A2B4.23D96CFB-ON65257BC0.003E4E48-65257BC0.003F133D@in.ibm.com> (message from Raunaq 12 on Wed, 7 Aug 2013 16:57:50 +0530)
> From: Raunaq 12 <raunaq12@in.ibm.com>
> Date: Wed, 7 Aug 2013 16:57:50 +0530
>
> > ChangeLog :-
> > * aixthread.c: call ptrace64 instead of ptracex if defined
> > Call ptrace64 instead of ptrace if defined
> > Add macro addr_ptr to take care of ptrace address arguement
> > (pdc_read_regs): Likewise
> > (pdc_write_regs): Likewise
> > (aix_thread_resume): Likewise
> > (fetch_regs_kernel_thread): Likewise
> > (store_regs_kernel_thread): Likewise
> >
> Mark> Again, you're being sloppy here. Sentences start with a capital
> letter and end in a full stop.
>
> Hi,
>
> Apologize for the overlooking punctuation errors. Fixing it here.
> Also re-submitting the patch here for review. Is it okay to Commit?
Yes, fine with me. Do you have a copyright assignment in place? Or
is this covered by a company-wide assignment that IBM has in place?
> ---
> ChangeLog :-
> * aixthread.c: Call ptrace64 instead of ptracex if defined.
> Call ptrace64 instead of ptrace if defined.
> Add macro addr_ptr to take care of ptrace address arguement.
> (pdc_read_regs): Likewise.
> (pdc_write_regs): Likewise.
> (aix_thread_resume): Likewise.
> (fetch_regs_kernel_thread): Likewise.
> (store_regs_kernel_thread): Likewise.
>
>
> ---
> Index: ./gdb/aix-thread.c
> ===================================================================
> --- ./gdb.orig/aix-thread.c
> +++ .gdb/aix-thread.c
> @@ -237,7 +237,14 @@
> return 0; /* Not reached. */
> }
>
> -/* Call ptracex (REQ, ID, ADDR, DATA, BUF). Return success. */
> +/* Call ptracex (REQ, ID, ADDR, DATA, BUF) or
> + ptrace64 (REQ, ID, ADDR, DATA, BUF) if HAVE_PTRACE64.
> + Return success. */
> +
> +#ifdef HAVE_PTRACE64
> +# define ptracex(request, pid, addr, data, buf) \
> + ptrace64 (request, pid, addr, data, buf)
> +#endif
>
> static int
> ptrace64aix (int req, int id, long long addr, int data, int *buf)
> @@ -246,14 +253,24 @@
> return ptrace_check (req, id, ptracex (req, id, addr, data, buf));
> }
>
> -/* Call ptrace (REQ, ID, ADDR, DATA, BUF). Return success. */
> +/* Call ptrace (REQ, ID, ADDR, DATA, BUF) or
> + ptrace64 (REQ, ID, ADDR, DATA, BUF) if HAVE_PTRACE64.
> + Return success. */
> +
> +#ifdef HAVE_PTRACE64
> +# define ptrace(request, pid, addr, data, buf) \
> + ptrace64 (request, pid, addr, data, buf)
> +# define addr_ptr long long
> +#else
> +# define addr_ptr int *
> +#endif
>
> static int
> -ptrace32 (int req, int id, int *addr, int data, int *buf)
> +ptrace32 (int req, int id, addr_ptr addr, int data, int *buf)
> {
> errno = 0;
> return ptrace_check (req, id,
> - ptrace (req, id, (int *) addr, data, buf));
> + ptrace (req, id, (addr_ptr) addr, data, buf));
> }
>
> /* If *PIDP is a composite process/thread id, convert it to a
> @@ -361,7 +378,7 @@
> /* Floating-point registers. */
> if (flags & PTHDB_FLAG_FPRS)
> {
> - if (!ptrace32 (PTT_READ_FPRS, tid, (void *) fprs, 0, NULL))
> + if (!ptrace32 (PTT_READ_FPRS, tid, (addr_ptr) fprs, 0, NULL))
> memset (fprs, 0, sizeof (fprs));
> memcpy (context->fpr, fprs, sizeof(fprs));
> }
> @@ -378,7 +395,7 @@
> }
> else
> {
> - if (!ptrace32 (PTT_READ_SPRS, tid, (int *) &sprs32, 0, NULL))
> + if (!ptrace32 (PTT_READ_SPRS, tid, (addr_ptr) &sprs32, 0, NULL))
> memset (&sprs32, 0, sizeof (sprs32));
> memcpy (&context->msr, &sprs32, sizeof(sprs32));
> }
> @@ -413,13 +430,13 @@
> ptrace64aix (PTT_WRITE_GPRS, tid,
> (unsigned long) context->gpr, 0, NULL);
> else
> - ptrace32 (PTT_WRITE_GPRS, tid, (int *) context->gpr, 0, NULL);
> + ptrace32 (PTT_WRITE_GPRS, tid, (addr_ptr) context->gpr, 0, NULL);
> }
>
> > /* Floating-point registers. */
> > if (flags & PTHDB_FLAG_FPRS)
> > {
> > - ptrace32 (PTT_WRITE_FPRS, tid, (int *) context->fpr, 0, NULL);
> > + ptrace32 (PTT_WRITE_FPRS, tid, (addr_ptr) context->fpr, 0, NULL);
> > }
> >
> > /* Special-purpose registers. */
> > @@ -432,7 +449,7 @@
> > }
> > else
> > {
> > - ptrace32 (PTT_WRITE_SPRS, tid, (void *) &context->msr, 0, NULL);
> > + ptrace32 (PTT_WRITE_SPRS, tid, (addr_ptr) &context->msr, 0, NULL);
> > }
> > }
> > return 0;
> > @@ -997,10 +1014,10 @@
> > tid[1] = 0;
> >
> > if (arch64)
> > - ptrace64aix (PTT_CONTINUE, tid[0], 1,
> > + ptrace64aix (PTT_CONTINUE, tid[0], (long long) 1,
> > gdb_signal_to_host (sig), (void *) tid);
> > else
> > - ptrace32 (PTT_CONTINUE, tid[0], (int *) 1,
> > + ptrace32 (PTT_CONTINUE, tid[0], (addr_ptr) 1,
> > gdb_signal_to_host (sig), (void *) tid);
> > }
> > }
> > @@ -1239,7 +1256,7 @@
> > }
> > else
> > {
> > - if (!ptrace32 (PTT_READ_GPRS, tid, gprs32, 0, NULL))
> > + if (!ptrace32 (PTT_READ_GPRS, tid, (addr_ptr) gprs32, 0, NULL))
> > memset (gprs32, 0, sizeof (gprs32));
> > for (i = 0; i < ppc_num_gprs; i++)
> > supply_reg32 (regcache, tdep->ppc_gp0_regnum + i, gprs32[i]);
> > @@ -1253,7 +1270,7 @@
> > || (regno >= tdep->ppc_fp0_regnum
> > && regno < tdep->ppc_fp0_regnum + ppc_num_fprs)))
> > {
> - if (!ptrace32 (PTT_READ_FPRS, tid, (void *) fprs, 0, NULL))
> + if (!ptrace32 (PTT_READ_FPRS, tid, (addr_ptr) fprs, 0, NULL))
> memset (fprs, 0, sizeof (fprs));
> supply_fprs (regcache, fprs);
> }
> @@ -1275,7 +1292,7 @@
> {
> struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
>
> - if (!ptrace32 (PTT_READ_SPRS, tid, (int *) &sprs32, 0, NULL))
> + if (!ptrace32 (PTT_READ_SPRS, tid, (addr_ptr) &sprs32, 0, NULL))
> memset (&sprs32, 0, sizeof (sprs32));
> supply_sprs32 (regcache, sprs32.pt_iar, sprs32.pt_msr,
> sprs32.pt_cr,
> sprs32.pt_lr, sprs32.pt_ctr, sprs32.pt_xer,
> @@ -1570,9 +1587,9 @@
> else
> {
> /* Pre-fetch: some regs may not be in the cache. */
> - ptrace32 (PTT_READ_GPRS, tid, gprs32, 0, NULL);
> + ptrace32 (PTT_READ_GPRS, tid, (addr_ptr) gprs32, 0, NULL);
> fill_gprs32 (regcache, gprs32);
> - ptrace32 (PTT_WRITE_GPRS, tid, gprs32, 0, NULL);
> + ptrace32 (PTT_WRITE_GPRS, tid, (addr_ptr) gprs32, 0, NULL);
> }
> }
>
> @@ -1584,9 +1601,9 @@
> && regno < tdep->ppc_fp0_regnum + ppc_num_fprs)))
> {
> /* Pre-fetch: some regs may not be in the cache. */
> - ptrace32 (PTT_READ_FPRS, tid, (void *) fprs, 0, NULL);
> + ptrace32 (PTT_READ_FPRS, tid, (addr_ptr) fprs, 0, NULL);
> fill_fprs (regcache, fprs);
> - ptrace32 (PTT_WRITE_FPRS, tid, (void *) fprs, 0, NULL);
> + ptrace32 (PTT_WRITE_FPRS, tid, (addr_ptr) fprs, 0, NULL);
> }
>
> /* Special-purpose registers. */
> @@ -1618,7 +1635,7 @@
> gdb_assert (sizeof (sprs32.pt_iar) == 4);
>
> /* Pre-fetch: some registers won't be in the cache. */
> - ptrace32 (PTT_READ_SPRS, tid, (int *) &sprs32, 0, NULL);
> + ptrace32 (PTT_READ_SPRS, tid, (addr_ptr) &sprs32, 0, NULL);
>
> fill_sprs32 (regcache, &tmp_iar, &tmp_msr, &tmp_cr, &tmp_lr,
> &tmp_ctr, &tmp_xer, &tmp_fpscr);
> @@ -1637,7 +1654,7 @@
> regcache_raw_collect (regcache, tdep->ppc_mq_regnum,
> &sprs32.pt_mq);
>
> - ptrace32 (PTT_WRITE_SPRS, tid, (int *) &sprs32, 0, NULL);
> + ptrace32 (PTT_WRITE_SPRS, tid, (addr_ptr) &sprs32, 0, NULL);
> }
> }
> }
> ---
>
>
>
next prev parent reply other threads:[~2013-08-07 11:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-01 11:30 Raunaq 12
2013-08-01 13:28 ` Mark Kettenis
2013-08-07 11:29 ` Raunaq 12
2013-08-07 11:38 ` Mark Kettenis [this message]
2013-08-07 11:45 ` Raunaq 12
2013-08-07 12:03 ` Ulrich Weigand
2013-08-07 12:36 ` Raunaq 12
2013-08-07 13:27 ` Ulrich Weigand
2013-08-07 13:32 ` Mark Kettenis
2013-08-07 14:10 ` [PATCH 1/5] config support for powerpc64-aix Raunaq 12
2013-08-07 14:45 ` Ulrich Weigand
-- strict thread matches above, loose matches on Subject: below --
2013-07-29 6:17 [PATCH 5/5] make calls to ptrace64 in aix-thread.c when defined Raunaq 12
2013-07-24 13:18 Raunaq 12
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201308071137.r77BbZ4G010318@glazunov.sibelius.xs4all.nl \
--to=mark.kettenis@xs4all.nl \
--cc=gdb-patches@sourceware.org \
--cc=raunaq12@in.ibm.com \
--cc=tromey@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox