[PATCH 14/26] gdb_byte for binary buffer, char for string: remote.c, tracepoint.c.

[Pedro Alves <palves@redhat.com>]

While the RSP is largely ASCII based (hence the packet buffer type is
char *), at places we pass around 8-bit binary packets in that buffer.
Functions like hex2bin or remote_escape_output conceptually are
handling binary buffers, so I left them as working with gdb_byte, and
added casts where necessary.  Whether these are host bytes or target
bytes is blurry at present, so this is largely a matter of taste.
Switching some of these functions to take "char *" or "void *" would
be equally good.

gdb/
2013-04-11  Pedro Alves  <palves@redhat.com>

	* remote.c (remote_write_bytes_aux, compare_sections_command)
	(remote_read_qxfer)
	(remote_search_memory, remote_hostio_pwrite, remote_hostio_pread)
	(remote_hostio_readlink, remote_bfd_iovec_pread)
	(remote_set_trace_notes): Use gdb_byte when RSP buffer is used as
	binary buffer, and char when buffer is used as string.
	* tracepoint.c (encode_source_string, tfile_write_uploaded_tp)
	(trace_save, tfile_open, traceframe_walk_blocks)
	(tfile_fetch_registers): Likewise.
---
 gdb/remote.c     |   29 +++++++++++++++--------------
 gdb/tracepoint.c |   17 +++++++++--------
 2 files changed, 24 insertions(+), 22 deletions(-)

diff --git a/gdb/remote.c b/gdb/remote.c
index 39ce116..1c3af57 100644
--- a/gdb/remote.c
+++ b/gdb/remote.c
@@ -6744,8 +6744,8 @@ remote_write_bytes_aux (const char *header, CORE_ADDR memaddr,
       /* Binary mode.  Send target system values byte by byte, in
 	 increasing byte addresses.  Only escape certain critical
 	 characters.  */
-      payload_length = remote_escape_output (myaddr, todo, p, &nr_bytes,
-					     payload_size);
+      payload_length = remote_escape_output (myaddr, todo, (gdb_byte *) p,
+					     &nr_bytes, payload_size);
 
       /* If not all TODO bytes fit, then we'll need another packet.  Make
 	 a second try to keep the end of the packet aligned.  Don't do
@@ -6758,7 +6758,7 @@ remote_write_bytes_aux (const char *header, CORE_ADDR memaddr,
 			  - memaddr);
 	  if (new_nr_bytes != nr_bytes)
 	    payload_length = remote_escape_output (myaddr, new_nr_bytes,
-						   p, &nr_bytes,
+						   (gdb_byte *) p, &nr_bytes,
 						   payload_size);
 	}
 
@@ -8576,7 +8576,7 @@ remote_write_qxfer (struct target_ops *ops, const char *object_name,
 
   /* Escape as much data as fits into rs->buf.  */
   buf_len = remote_escape_output 
-    (writebuf, len, (rs->buf + i), &max_size, max_size);
+    (writebuf, len, (gdb_byte *) rs->buf + i, &max_size, max_size);
 
   if (putpkt_binary (rs->buf, i + buf_len) < 0
       || getpkt_sane (&rs->buf, &rs->buf_size, 0) < 0
@@ -8655,7 +8655,8 @@ remote_read_qxfer (struct target_ops *ops, const char *object_name,
     error (_("Remote qXfer reply contained no data."));
 
   /* Got some data.  */
-  i = remote_unescape_input (rs->buf + 1, packet_len - 1, readbuf, n);
+  i = remote_unescape_input ((gdb_byte *) rs->buf + 1,
+			     packet_len - 1, readbuf, n);
 
   /* 'l' is an EOF marker, possibly including a final block of data,
      or possibly empty.  If we have the final block of a non-empty
@@ -8936,7 +8937,7 @@ remote_search_memory (struct target_ops* ops,
 
   /* Escape as much data as fits into rs->buf.  */
   escaped_pattern_len =
-    remote_escape_output (pattern, pattern_len, (rs->buf + i),
+    remote_escape_output (pattern, pattern_len, (gdb_byte *) rs->buf + i,
 			  &used_pattern_len, max_size);
 
   /* Bail if the pattern is too large.  */
@@ -9710,7 +9711,7 @@ remote_hostio_pwrite (int fd, const gdb_byte *write_buf, int len,
   remote_buffer_add_int (&p, &left, offset);
   remote_buffer_add_string (&p, &left, ",");
 
-  p += remote_escape_output (write_buf, len, p, &out_len,
+  p += remote_escape_output (write_buf, len, (gdb_byte *) p, &out_len,
 			     get_remote_packet_size () - (p - rs->buf));
 
   return remote_hostio_send_command (p - rs->buf, PACKET_vFile_pwrite,
@@ -9749,7 +9750,7 @@ remote_hostio_pread (int fd, gdb_byte *read_buf, int len,
   if (ret < 0)
     return ret;
 
-  read_len = remote_unescape_input (attachment, attachment_len,
+  read_len = remote_unescape_input ((gdb_byte *) attachment, attachment_len,
 				    read_buf, len);
   if (read_len != ret)
     error (_("Read returned %d, but %d bytes."), ret, (int) read_len);
@@ -9823,8 +9824,8 @@ remote_hostio_readlink (const char *filename, int *remote_errno)
 
   ret = xmalloc (len + 1);
 
-  read_len = remote_unescape_input (attachment, attachment_len,
-				    ret, len);
+  read_len = remote_unescape_input ((gdb_byte *) attachment, attachment_len,
+				    (gdb_byte *) ret, len);
   if (read_len != len)
     error (_("Readlink returned %d, but %d bytes."), len, read_len);
 
@@ -9952,7 +9953,7 @@ remote_bfd_iovec_pread (struct bfd *abfd, void *stream, void *buf,
   pos = 0;
   while (nbytes > pos)
     {
-      bytes = remote_hostio_pread (fd, (char *)buf + pos, nbytes - pos,
+      bytes = remote_hostio_pread (fd, (gdb_byte *) buf + pos, nbytes - pos,
 				   offset + pos, &remote_errno);
       if (bytes == 0)
         /* Success, but no bytes, means end-of-file.  */
@@ -11135,21 +11136,21 @@ remote_set_trace_notes (char *user, char *notes, char *stop_notes)
   if (user)
     {
       buf += xsnprintf (buf, endbuf - buf, "user:");
-      nbytes = bin2hex (user, buf, 0);
+      nbytes = bin2hex ((gdb_byte *) user, buf, 0);
       buf += 2 * nbytes;
       *buf++ = ';';
     }
   if (notes)
     {
       buf += xsnprintf (buf, endbuf - buf, "notes:");
-      nbytes = bin2hex (notes, buf, 0);
+      nbytes = bin2hex ((gdb_byte *) notes, buf, 0);
       buf += 2 * nbytes;
       *buf++ = ';';
     }
   if (stop_notes)
     {
       buf += xsnprintf (buf, endbuf - buf, "tstop:");
-      nbytes = bin2hex (stop_notes, buf, 0);
+      nbytes = bin2hex ((gdb_byte *) stop_notes, buf, 0);
       buf += 2 * nbytes;
       *buf++ = ';';
     }
diff --git a/gdb/tracepoint.c b/gdb/tracepoint.c
index b89ca22..212fe59 100644
--- a/gdb/tracepoint.c
+++ b/gdb/tracepoint.c
@@ -3000,7 +3000,7 @@ encode_source_string (int tpnum, ULONGEST addr,
 	   srctype, 0, (int) strlen (src));
   if (strlen (buf) + strlen (src) * 2 >= buf_size)
     error (_("Source string too long for buffer"));
-  bin2hex (src, buf + strlen (buf), 0);
+  bin2hex ((gdb_byte *) src, buf + strlen (buf), 0);
   return -1;
 }
 
@@ -3190,7 +3190,7 @@ tfile_write_uploaded_tp (struct trace_file_writer *self,
     = (struct tfile_trace_file_writer *) self;
   int a;
   char *act;
-  gdb_byte buf[MAX_TRACE_UPLOAD];
+  char buf[MAX_TRACE_UPLOAD];
 
   fprintf (writer->fp, "tp T%x:%s:%c:%x:%x",
 	   utp->number, phex_nz (utp->addr, sizeof (utp->addr)),
@@ -3322,6 +3322,7 @@ trace_save (const char *filename, struct trace_file_writer *writer,
 
   ULONGEST offset = 0;
   gdb_byte buf[MAX_TRACE_UPLOAD];
+#define MAX_TRACE_UPLOAD 2000
   int written;
   enum bfd_endian byte_order = gdbarch_byte_order (target_gdbarch ());
 
@@ -4175,7 +4176,7 @@ tfile_open (char *filename, int from_tty)
   int scratch_chan;
   char header[TRACE_HEADER_SIZE];
   char linebuf[1000]; /* Should be max remote packet size or so.  */
-  char byte;
+  gdb_byte byte;
   int bytes, i;
   struct trace_status *ts;
   struct uploaded_tp *uploaded_tps = NULL;
@@ -4387,7 +4388,7 @@ Status line: '%s'\n"), p, line);
 	  else if (p2 != p1)
 	    {
 	      ts->stop_desc = xmalloc (strlen (line));
-	      end = hex2bin (p1, ts->stop_desc, (p2 - p1) / 2);
+	      end = hex2bin (p1, (gdb_byte *) ts->stop_desc, (p2 - p1) / 2);
 	      ts->stop_desc[end] = '\0';
 	    }
 	  else
@@ -4407,7 +4408,7 @@ Status line: '%s'\n"), p, line);
 	  if (p2 != p1)
 	    {
 	      ts->stop_desc = xmalloc ((p2 - p1) / 2 + 1);
-	      end = hex2bin (p1, ts->stop_desc, (p2 - p1) / 2);
+	      end = hex2bin (p1, (gdb_byte *) ts->stop_desc, (p2 - p1) / 2);
 	      ts->stop_desc[end] = '\0';
 	    }
 	  else
@@ -4461,7 +4462,7 @@ Status line: '%s'\n"), p, line);
 	{
 	  ++p1;
 	  ts->user_name = xmalloc (strlen (p) / 2);
-	  end = hex2bin (p1, ts->user_name, (p3 - p1)  / 2);
+	  end = hex2bin (p1, (gdb_byte *) ts->user_name, (p3 - p1)  / 2);
 	  ts->user_name[end] = '\0';
 	  p = p3;
 	}
@@ -4469,7 +4470,7 @@ Status line: '%s'\n"), p, line);
 	{
 	  ++p1;
 	  ts->notes = xmalloc (strlen (p) / 2);
-	  end = hex2bin (p1, ts->notes, (p3 - p1) / 2);
+	  end = hex2bin (p1, (gdb_byte *) ts->notes, (p3 - p1) / 2);
 	  ts->notes[end] = '\0';
 	  p = p3;
 	}
@@ -4865,7 +4866,7 @@ traceframe_walk_blocks (walk_blocks_callback_func callback,
       unsigned short mlen;
       char block_type;
 
-      tfile_read (&block_type, 1);
+      tfile_read ((gdb_byte *) &block_type, 1);
 
       ++pos;