From: Pedro Alves <pedro@codesourcery.com>
To: Andreas Schwab <schwab@linux-m68k.org>
Cc: gdb-patches@sourceware.org
Subject: Re: [RFC/WIP PATCH 02/14] Mask software breakpoints from memory writes too
Date: Wed, 14 Dec 2011 15:06:00 -0000 [thread overview]
Message-ID: <201112141459.49456.pedro@codesourcery.com> (raw)
In-Reply-To: <m2r507jowf.fsf@igel.home>
On Wednesday 14 December 2011 12:53:04, Andreas Schwab wrote:
> Pedro Alves <pedro@codesourcery.com> writes:
>
> > Does this fix it?
> >
> > --- a/gdb/ppc-linux-tdep.c
> > +++ b/gdb/ppc-linux-tdep.c
> > @@ -218,7 +218,7 @@ ppc_linux_memory_remove_breakpoint (struct gdbarch *gdbarch,
> > program modified the code on us, so it is wrong to put back the
> > old value. */
> > if (val == 0 && memcmp (bp, old_contents, bplen) == 0)
> > - val = target_write_memory (addr, bp_tgt->shadow_contents, bplen);
> > + val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen);
> >
> > do_cleanups (cleanup);
> > return val;
>
> Looks good, thanks.
Thanks. I've applied the patch below to do the same adjustment to
all memory_remove_breakpoint callbacks. Applied to both mainline
and the 7.4 branch.
--
Pedro Alves
2011-12-14 Pedro Alves <pedro@codesourcery.com>
* ia64-tdep.c (ia64_memory_remove_breakpoint): Use
target_write_raw_memory.
* m32r-tdep.c (m32r_memory_remove_breakpoint): Use
target_write_raw_memory.
* microblaze-linux-tdep.c
(microblaze_linux_memory_remove_breakpoint): Use
target_write_raw_memory.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint): Use
target_write_raw_memory.
---
gdb/ia64-tdep.c | 2 +-
gdb/m32r-tdep.c | 2 +-
gdb/microblaze-linux-tdep.c | 2 +-
gdb/ppc-linux-tdep.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/gdb/ia64-tdep.c b/gdb/ia64-tdep.c
index 68e5021..d1940e6 100644
--- a/gdb/ia64-tdep.c
+++ b/gdb/ia64-tdep.c
@@ -811,7 +811,7 @@ ia64_memory_remove_breakpoint (struct gdbarch *gdbarch,
/* In BUNDLE_MEM, be careful to modify only the bits belonging to SLOTNUM
and not any of the other ones that are stored in SHADOW_CONTENTS. */
replace_slotN_contents (bundle_mem, instr_saved, slotnum);
- val = target_write_memory (addr, bundle_mem, BUNDLE_LEN);
+ val = target_write_raw_memory (addr, bundle_mem, BUNDLE_LEN);
do_cleanups (cleanup);
return val;
diff --git a/gdb/m32r-tdep.c b/gdb/m32r-tdep.c
index 136fd7b..b417db0 100644
--- a/gdb/m32r-tdep.c
+++ b/gdb/m32r-tdep.c
@@ -163,7 +163,7 @@ m32r_memory_remove_breakpoint (struct gdbarch *gdbarch,
}
/* Write contents. */
- val = target_write_memory (addr & 0xfffffffc, buf, 4);
+ val = target_write_raw_memory (addr & 0xfffffffc, buf, 4);
return val;
}
diff --git a/gdb/microblaze-linux-tdep.c b/gdb/microblaze-linux-tdep.c
index c14e01b..7b2662d 100644
--- a/gdb/microblaze-linux-tdep.c
+++ b/gdb/microblaze-linux-tdep.c
@@ -58,7 +58,7 @@ microblaze_linux_memory_remove_breakpoint (struct gdbarch *gdbarch,
program modified the code on us, so it is wrong to put back the
old value. */
if (val == 0 && memcmp (bp, old_contents, bplen) == 0)
- val = target_write_memory (addr, bp_tgt->shadow_contents, bplen);
+ val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen);
return val;
}
diff --git a/gdb/ppc-linux-tdep.c b/gdb/ppc-linux-tdep.c
index e623742..9968621 100644
--- a/gdb/ppc-linux-tdep.c
+++ b/gdb/ppc-linux-tdep.c
@@ -218,7 +218,7 @@ ppc_linux_memory_remove_breakpoint (struct gdbarch *gdbarch,
program modified the code on us, so it is wrong to put back the
old value. */
if (val == 0 && memcmp (bp, old_contents, bplen) == 0)
- val = target_write_memory (addr, bp_tgt->shadow_contents, bplen);
+ val = target_write_raw_memory (addr, bp_tgt->shadow_contents, bplen);
do_cleanups (cleanup);
return val;
next prev parent reply other threads:[~2011-12-14 15:00 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-28 15:39 [RFC/WIP PATCH 00/14] I/T sets Pedro Alves
2011-11-28 15:39 ` [RFC/WIP PATCH 01/14] Breakpoints always-inserted and the record target Pedro Alves
2011-11-29 21:09 ` Tom Tromey
2011-12-05 17:04 ` Pedro Alves
2011-11-28 15:39 ` [RFC/WIP PATCH 03/14] Flip to set target-async on by default Pedro Alves
2011-11-29 21:18 ` Tom Tromey
2011-12-02 19:16 ` Marc Khouzam
2011-11-28 15:39 ` [RFC/WIP PATCH 05/14] Add a small helper to get at a thread's inferior Pedro Alves
2011-11-29 21:19 ` Tom Tromey
2011-11-28 15:39 ` [RFC/WIP PATCH 02/14] Mask software breakpoints from memory writes too Pedro Alves
2011-12-06 20:40 ` Pedro Alves
2011-12-13 21:26 ` Andreas Schwab
2011-12-13 21:38 ` Pedro Alves
2011-12-14 2:08 ` Andreas Schwab
2011-12-14 12:53 ` Pedro Alves
2011-12-14 12:53 ` Andreas Schwab
2011-12-14 15:06 ` Pedro Alves [this message]
2011-12-14 15:38 ` Joel Brobecker
2011-11-28 15:40 ` [RFC/WIP PATCH 13/14] Make "thread apply all" only loop over threads in the current set Pedro Alves
2011-11-28 18:40 ` Eli Zaretskii
2011-11-28 18:56 ` Pedro Alves
2011-11-29 21:47 ` Tom Tromey
2011-12-16 18:47 ` Pedro Alves
2011-11-28 15:40 ` [RFC/WIP PATCH 08/14] Add support for the '@' core operator Pedro Alves
2011-11-30 17:29 ` Tom Tromey
2011-11-28 15:40 ` [RFC/WIP PATCH 04/14] Implement all-stop on top of a target running non-stop mode Pedro Alves
2011-11-28 15:40 ` [RFC/WIP PATCH 12/14] Fix deref of stale pointer Pedro Alves
2011-11-28 15:40 ` [RFC/WIP PATCH 09/14] I/T set support for breakpoints - trigger set, and stop set Pedro Alves
2011-11-29 22:02 ` Tom Tromey
2011-11-30 19:38 ` Tom Tromey
2011-12-16 19:29 ` Pedro Alves
2011-11-28 15:40 ` [RFC/WIP PATCH 10/14] Comment out new info breakpoints output, in order to not break the test suite Pedro Alves
2011-11-28 15:40 ` [RFC/WIP PATCH 07/14] Expand %ITSET% in the prompt to the current I/T set Pedro Alves
2011-11-29 21:22 ` Tom Tromey
2011-12-16 19:07 ` Pedro Alves
2011-12-16 19:09 ` Tom Tromey
2011-12-16 19:38 ` Pedro Alves
2011-11-28 15:45 ` [RFC/WIP PATCH 06/14] Add base itsets support Pedro Alves
2011-11-28 18:47 ` Eli Zaretskii
2011-11-28 18:56 ` Pedro Alves
2011-11-29 22:07 ` Tom Tromey
2011-11-30 18:54 ` Tom Tromey
2011-12-16 17:26 ` Pedro Alves
2011-11-28 15:45 ` [RFC/WIP PATCH 14/14] Fix manythreads.exp test Pedro Alves
2011-11-28 15:46 ` [RFC/WIP PATCH 11/14] Add I/T set support to most execution commands Pedro Alves
2011-11-30 19:27 ` Tom Tromey
2011-11-28 18:10 ` [RFC/WIP PATCH 00/14] I/T sets Pedro Alves
2011-11-30 19:35 ` Tom Tromey
2011-12-16 19:40 ` Pedro Alves
2012-02-09 7:51 ` Tomas Östlund
2012-02-09 8:19 ` [RFC/WIP PATCH 00/14] I/T sets (resend) Tomas Östlund
2012-02-09 14:36 ` Pedro Alves
2012-02-15 9:48 ` Tomas Östlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201112141459.49456.pedro@codesourcery.com \
--to=pedro@codesourcery.com \
--cc=gdb-patches@sourceware.org \
--cc=schwab@linux-m68k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox