From: "Ulrich Weigand" <uweigand@de.ibm.com>
To: gdb-patches@sourceware.org, brobecker@adacore.com
Subject: [rfc] Ada simplification: desc_data_type
Date: Thu, 14 May 2009 11:37:00 -0000 [thread overview]
Message-ID: <200905141137.n4EBbSwM004281@d12av02.megacenter.de.ibm.com> (raw)
Hello,
another problematic use of lookup_pointer_type in Ada architecture-independent
code: desc_data_type is supposed to return a pointer type, but doesn't really
know which architecture to use to determine pointer size.
Fortunately, all but one callers of that routine immediately dereference the
pointer again. The one instance that actually uses the pointer at least
operates on a *value*, which is already architecture-dependent ...
The patch replaces desc_data_type with a new "desc_data_target_type" routine
which always returns the pointed-to type. Only thin_data_pntr then does the
lookup_pointer_type itself.
Overall, this patch also should have no change in behaviour.
Joel, would this be OK?
Bye,
Ulrich
ChangeLog:
* ada-lang.c (desc_data_type): Remove, replace by ...
(desc_data_target_type): ... this.
(thin_data_pntr): Use desc_data_target_type instead of desc_data_type.
(ada_is_array_descriptor_type): Likewise.
(ada_type_of_array): Likewise.
(ada_coerce_to_simple_array_type): Likewise.
(ada_array_element_type): Likewise.
Index: gdb-head/gdb/ada-lang.c
===================================================================
--- gdb-head.orig/gdb/ada-lang.c
+++ gdb-head/gdb/ada-lang.c
@@ -79,7 +79,7 @@ static int fat_pntr_bounds_bitpos (struc
static int fat_pntr_bounds_bitsize (struct type *);
-static struct type *desc_data_type (struct type *);
+static struct type *desc_data_target_type (struct type *);
static struct value *desc_data (struct value *);
@@ -1281,11 +1281,13 @@ static struct value *
thin_data_pntr (struct value *val)
{
struct type *type = value_type (val);
+ struct type *data_type = desc_data_target_type (thin_descriptor_type (type));
+ data_type = lookup_pointer_type (data_type);
+
if (TYPE_CODE (type) == TYPE_CODE_PTR)
- return value_cast (desc_data_type (thin_descriptor_type (type)),
- value_copy (val));
+ return value_cast (data_type, value_copy (val));
else
- return value_from_longest (desc_data_type (thin_descriptor_type (type)),
+ return value_from_longest (data_type,
VALUE_ADDRESS (val) + value_offset (val));
}
@@ -1389,23 +1391,27 @@ fat_pntr_bounds_bitsize (struct type *ty
}
/* If TYPE is the type of an array descriptor (fat or thin pointer) or a
- pointer to one, the type of its array data (a
- pointer-to-array-with-no-bounds type); otherwise, NULL. Use
- ada_type_of_array to get an array type with bounds data. */
+ pointer to one, the type of its array data (a array-with-no-bounds type);
+ otherwise, NULL. Use ada_type_of_array to get an array type with bounds
+ data. */
static struct type *
-desc_data_type (struct type *type)
+desc_data_target_type (struct type *type)
{
type = desc_base_type (type);
/* NOTE: The following is bogus; see comment in desc_bounds. */
if (is_thin_pntr (type))
- return lookup_pointer_type
- (desc_base_type (TYPE_FIELD_TYPE (thin_descriptor_type (type), 1)));
+ return desc_base_type (TYPE_FIELD_TYPE (thin_descriptor_type (type), 1));
else if (is_thick_pntr (type))
- return lookup_struct_elt_type (type, "P_ARRAY", 1);
- else
- return NULL;
+ {
+ struct type *data_type = lookup_struct_elt_type (type, "P_ARRAY", 1);
+ if (data_type
+ && TYPE_CODE (ada_check_typedef (data_type)) == TYPE_CODE_PTR)
+ return TYPE_TARGET_TYPE (data_type);
+ }
+
+ return NULL;
}
/* If ARR is an array descriptor (fat or thin pointer), a pointer to
@@ -1556,17 +1562,14 @@ ada_is_simple_array_type (struct type *t
int
ada_is_array_descriptor_type (struct type *type)
{
- struct type *data_type = desc_data_type (type);
+ struct type *data_type = desc_data_target_type (type);
if (type == NULL)
return 0;
type = ada_check_typedef (type);
return
data_type != NULL
- && ((TYPE_CODE (data_type) == TYPE_CODE_PTR
- && TYPE_TARGET_TYPE (data_type) != NULL
- && TYPE_CODE (TYPE_TARGET_TYPE (data_type)) == TYPE_CODE_ARRAY)
- || TYPE_CODE (data_type) == TYPE_CODE_ARRAY)
+ && TYPE_CODE (data_type) == TYPE_CODE_ARRAY
&& desc_arity (desc_bounds_type (type)) > 0;
}
@@ -1605,7 +1608,7 @@ ada_type_of_array (struct value *arr, in
if (!bounds)
return
- ada_check_typedef (TYPE_TARGET_TYPE (desc_data_type (value_type (arr))));
+ ada_check_typedef (desc_data_target_type (value_type (arr)));
else
{
struct type *elt_type;
@@ -1693,7 +1696,7 @@ ada_coerce_to_simple_array_type (struct
return decode_packed_array_type (type);
if (ada_is_array_descriptor_type (type))
- return ada_check_typedef (TYPE_TARGET_TYPE (desc_data_type (type)));
+ return ada_check_typedef (desc_data_target_type (type));
return type;
}
@@ -2377,7 +2380,7 @@ ada_array_element_type (struct type *typ
int k;
struct type *p_array_type;
- p_array_type = desc_data_type (type);
+ p_array_type = desc_data_target_type (type);
k = ada_array_arity (type);
if (k == 0)
@@ -2386,7 +2389,6 @@ ada_array_element_type (struct type *typ
/* Initially p_array_type = elt_type(*)[]...(k times)...[]. */
if (nindices >= 0 && k > nindices)
k = nindices;
- p_array_type = TYPE_TARGET_TYPE (p_array_type);
while (k > 0 && p_array_type != NULL)
{
p_array_type = ada_check_typedef (TYPE_TARGET_TYPE (p_array_type));
--
Dr. Ulrich Weigand
GNU Toolchain for Linux on System z and Cell BE
Ulrich.Weigand@de.ibm.com
next reply other threads:[~2009-05-14 11:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-14 11:37 Ulrich Weigand [this message]
2009-05-15 15:01 ` Joel Brobecker
2009-05-18 13:58 ` Ulrich Weigand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200905141137.n4EBbSwM004281@d12av02.megacenter.de.ibm.com \
--to=uweigand@de.ibm.com \
--cc=brobecker@adacore.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox