From: Joel Brobecker <brobecker@gnat.com>
To: gdb-patches@sources.redhat.com
Subject: [RFA/RFC/IRIX] Remove some deprecated_registers from irix5-nat.c
Date: Sat, 13 Nov 2004 22:42:00 -0000 [thread overview]
Message-ID: <20041113224227.GK935@gnat.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1637 bytes --]
Hello,
Here is a patch that removes most of the uses of deprecated_registers
in irix5-nat.c. I am not too familiar with the regcache yet, I hope
I got it right. There was also a small issue with type size, where
I introduced a temporary (regval) to make sure that the buffer given
to regcache_raw_read_signed would always be large enough. Not sure
whether it was the best way to do it (this shows my lack of C knowledge).
2004-11-13 Joel Brobecker <brobecker@gnat.com>
* irix5-nat.c (fill_gregset): Replace use of deprecated_registers
with equivalent code.
(fill_fpregset): Likewise.
Tested on mips-irix. There is an occasional screwup during the execution
of gdb.threads/killed.exp that causes the testsuite to abort before the
end:
ERROR: (DejaGnu) proc "(gdb) {$}" does not exist.
The error code is NONE
The info on the error is:
close: invalid spawn id (8)
while executing
"close -i 8"
invoked from within
"catch "close -i $spawn_id""
Given that the testsuite takes a fair bit of time to run on our
IRIX machine, and given that it can happen several times in a row
before I get a clean run, I am reluctant to retry.
So it's a bit more difficult to compare the two testsuite results.
But I verified that we didn't have any change in all the testsuite
up until this point.
OK to apply?
The last couple of uses of deprecated_registers will be removed shortly.
I decided to handle them separately because they are used when loading
the registers from a core file. I wanted to evaluate the attached change
first.
Thanks,
--
Joel
[-- Attachment #2: irix5-nat.c.diff --]
[-- Type: text/plain, Size: 3560 bytes --]
Index: irix5-nat.c
===================================================================
RCS file: /cvs/src/src/gdb/irix5-nat.c,v
retrieving revision 1.35
diff -u -p -r1.35 irix5-nat.c
--- irix5-nat.c 30 Oct 2004 22:36:34 -0000 1.35
+++ irix5-nat.c 13 Nov 2004 22:33:07 -0000
@@ -83,6 +83,7 @@ fill_gregset (gregset_t *gregsetp, int r
{
int regi;
greg_t *regp = &(*gregsetp)[0];
+ LONGEST regval;
/* Under Irix6, if GDB is built with N32 ABI and is debugging an O32
executable, we have to sign extend the registers to 64 bits before
@@ -90,30 +91,39 @@ fill_gregset (gregset_t *gregsetp, int r
for (regi = 0; regi <= CTX_RA; regi++)
if ((regno == -1) || (regno == regi))
- *(regp + regi) =
- extract_signed_integer (&deprecated_registers[DEPRECATED_REGISTER_BYTE (regi)],
- register_size (current_gdbarch, regi));
+ {
+ regcache_raw_read_signed (current_regcache, regi, ®val);
+ *(regp + regi) = regval;
+ }
if ((regno == -1) || (regno == PC_REGNUM))
- *(regp + CTX_EPC) =
- extract_signed_integer (&deprecated_registers[DEPRECATED_REGISTER_BYTE (mips_regnum (current_gdbarch)->pc)],
- register_size (current_gdbarch, mips_regnum (current_gdbarch)->pc));
+ {
+ regcache_raw_read_signed
+ (current_regcache, mips_regnum (current_gdbarch)->pc, ®val);
+ *(regp + CTX_EPC) = regval;
+ }
if ((regno == -1) || (regno == mips_regnum (current_gdbarch)->cause))
- *(regp + CTX_CAUSE) =
- extract_signed_integer (&deprecated_registers[DEPRECATED_REGISTER_BYTE (mips_regnum (current_gdbarch)->cause)],
- register_size (current_gdbarch, mips_regnum (current_gdbarch)->cause));
+ {
+ regcache_raw_read_signed
+ (current_regcache, mips_regnum (current_gdbarch)->cause, ®val);
+ *(regp + CTX_CAUSE) = regval;
+ }
if ((regno == -1)
|| (regno == mips_regnum (current_gdbarch)->hi))
- *(regp + CTX_MDHI) =
- extract_signed_integer (&deprecated_registers[DEPRECATED_REGISTER_BYTE (mips_regnum (current_gdbarch)->hi)],
- register_size (current_gdbarch, mips_regnum (current_gdbarch)->hi));
+ {
+ regcache_raw_read_signed
+ (current_regcache, mips_regnum (current_gdbarch)->hi, ®val);
+ *(regp + CTX_MDHI) = regval;
+ }
if ((regno == -1) || (regno == mips_regnum (current_gdbarch)->lo))
- *(regp + CTX_MDLO) =
- extract_signed_integer (&deprecated_registers[DEPRECATED_REGISTER_BYTE (mips_regnum (current_gdbarch)->lo)],
- register_size (current_gdbarch, mips_regnum (current_gdbarch)->lo));
+ {
+ regcache_raw_read_signed
+ (current_regcache, mips_regnum (current_gdbarch)->lo, ®val);
+ *(regp + CTX_MDLO) = regval;
+ }
}
/*
@@ -158,15 +168,16 @@ fill_fpregset (fpregset_t *fpregsetp, in
{
if ((regno == -1) || (regno == regi))
{
- from = (char *) &deprecated_registers[DEPRECATED_REGISTER_BYTE (regi)];
to = (char *) &(fpregsetp->fp_r.fp_regs[regi - FP0_REGNUM]);
- memcpy (to, from, register_size (current_gdbarch, regi));
+ regcache_raw_read (current_regcache, regi, to);
}
}
if ((regno == -1)
|| (regno == mips_regnum (current_gdbarch)->fp_control_status))
- fpregsetp->fp_csr = *(unsigned *) &deprecated_registers[DEPRECATED_REGISTER_BYTE (mips_regnum (current_gdbarch)->fp_control_status)];
+ regcache_raw_read (current_regcache,
+ mips_regnum (current_gdbarch)->fp_control_status,
+ &fpregsetp->fp_csr);
}
next reply other threads:[~2004-11-13 22:42 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-13 22:42 Joel Brobecker [this message]
2004-11-13 23:06 ` Andrew Cagney
2004-11-14 1:24 ` Joel Brobecker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20041113224227.GK935@gnat.com \
--to=brobecker@gnat.com \
--cc=gdb-patches@sources.redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox