Mirror of the gdb-patches mailing list
 help / color / mirror / Atom feed
From: Roland McGrath <roland@redhat.com>
To: gdb-patches@sources.redhat.com
Subject: [PATCH] remote protocol support for TARGET_OBJECT_AUXV
Date: Wed, 25 Feb 2004 19:42:00 -0000	[thread overview]
Message-ID: <200402251941.i1PJfx4p004863@magilla.sf.frob.com> (raw)

This patch implements the remote support for auxv access.
The new protocol bits were just committed to gdb.texinfo, which see.
Here is the patch for the gdb side, followed by the patch
implementing the stub side for gdbserver on GNU/Linux.


Thanks,
Roland


2004-02-25  Roland McGrath  <roland@redhat.com>

	* remote.c (remote_protocol_qPart_auxv): New variable.
	(init_all_packet_configs): Initialize it.
	(set_remote_protocol_qPart_auxv_packet_cmd): New function.
	(show_remote_protocol_qPart_auxv_packet_cmd): New function.
	(show_remote_cmd): Call it.
	(_initialize_remote): Initialize commands.
	(remote_xfer_partial): If enabled, use qPart:auxv:read:... query to
	service TARGET_OBJECT_AUXV requests.

Index: remote.c
===================================================================
RCS file: /cvs/src/src/gdb/remote.c,v
retrieving revision 1.129
diff -b -p -u -r1.129 remote.c
--- remote.c	15 Feb 2004 15:22:06 -0000	1.129
+++ remote.c	25 Feb 2004 19:38:03 -0000
@@ -981,6 +981,23 @@ show_remote_protocol_binary_download_cmd
   show_packet_config_cmd (&remote_protocol_binary_download);
 }
 
+/* Should we try the 'qPart:auxv' (target auxiliary vector read) request? */
+static struct packet_config remote_protocol_qPart_auxv;
+
+static void
+set_remote_protocol_qPart_auxv_packet_cmd (char *args, int from_tty,
+					   struct cmd_list_element *c)
+{
+  update_packet_config (&remote_protocol_qPart_auxv);
+}
+
+static void
+show_remote_protocol_qPart_auxv_packet_cmd (char *args, int from_tty,
+					    struct cmd_list_element *c)
+{
+  show_packet_config_cmd (&remote_protocol_qPart_auxv);
+}
+
 
 /* Tokens for use by the asynchronous signal handlers for SIGINT */
 static void *sigint_remote_twice_token;
@@ -2070,6 +2087,7 @@ init_all_packet_configs (void)
   /* Force remote_write_bytes to check whether target supports binary
      downloading. */
   update_packet_config (&remote_protocol_binary_download);
+  update_packet_config (&remote_protocol_qPart_auxv);
 }
 
 /* Symbol look-up. */
@@ -4872,6 +4890,41 @@ remote_xfer_partial (struct target_ops *
     case TARGET_OBJECT_AVR:
       query_type = 'R';
       break;
+
+    case TARGET_OBJECT_AUXV:
+      if (remote_protocol_qPart_auxv.support != PACKET_DISABLE)
+	{
+	  unsigned int total = 0;
+	  while (len > 0)
+	    {
+	      LONGEST n = min ((rs->remote_packet_size - 2) / 2, len);
+	      snprintf (buf2, rs->remote_packet_size,
+			"qPart:auxv:read::%s,%s",
+			phex_nz (offset, sizeof offset),
+			phex_nz (n, sizeof n));
+	      i = putpkt (buf2);
+	      if (i < 0)
+		return total > 0 ? total : i;
+	      buf2[0] = '\0';
+	      getpkt (buf2, rs->remote_packet_size, 0);
+	      if (packet_ok (buf2, &remote_protocol_qPart_auxv) != PACKET_OK)
+		return total > 0 ? total : -1;
+	      if (buf2[0] == 'O' && buf2[1] == 'K' && buf2[2] == '\0')
+		break;		/* Got EOF indicator.  */
+	      /* Got some data.  */
+	      i = hex2bin (buf2, readbuf, len);
+	      if (i > 0)
+		{
+		  readbuf = (void *) ((char *) readbuf + i);
+		  offset += i;
+		  len -= i;
+		  total += i;
+		}
+	    }
+	  return total;
+	}
+      return -1;
+
     default:
       return -1;
     }
@@ -5369,6 +5422,7 @@ show_remote_cmd (char *args, int from_tt
   show_remote_protocol_qSymbol_packet_cmd (args, from_tty, NULL);
   show_remote_protocol_vcont_packet_cmd (args, from_tty, NULL);
   show_remote_protocol_binary_download_cmd (args, from_tty, NULL);
+  show_remote_protocol_qPart_auxv_packet_cmd (args, from_tty, NULL);
 }
 
 static void
@@ -5609,6 +5663,13 @@ in a memory packet.\n",
 			 "Z4", "access-watchpoint",
 			 set_remote_protocol_Z_access_wp_packet_cmd,
 			 show_remote_protocol_Z_access_wp_packet_cmd,
+			 &remote_set_cmdlist, &remote_show_cmdlist,
+			 0);
+
+  add_packet_config_cmd (&remote_protocol_qPart_auxv,
+			 "qPart_auxv", "read-aux-vector",
+			 set_remote_protocol_qPart_auxv_packet_cmd,
+			 show_remote_protocol_qPart_auxv_packet_cmd,
 			 &remote_set_cmdlist, &remote_show_cmdlist,
 			 0);
 

2004-02-25  Roland McGrath  <roland@redhat.com>

	* target.h (struct target_ops): New member `read_auxv'.
	* server.c (handle_query): Handle qPart:auxv:read: query using that.
	* linux-low.c (linux_read_auxv): New function.
	(linux_target_ops): Initialize `read_auxv' member to that.

Index: gdbserver/linux-low.c
===================================================================
RCS file: /cvs/src/src/gdb/gdbserver/linux-low.c,v
retrieving revision 1.27
diff -b -p -u -r1.27 linux-low.c
--- gdbserver/linux-low.c	31 Jan 2004 22:19:31 -0000	1.27
+++ gdbserver/linux-low.c	25 Feb 2004 19:38:03 -0000
@@ -1381,6 +1381,32 @@ linux_send_signal (int signum)
     kill (signal_pid, signum);
 }
 
+/* Copy LEN bytes from inferior's auxiliary vector starting at OFFSET
+   to debugger memory starting at MYADDR.  */
+
+static int
+linux_read_auxv (CORE_ADDR offset, char *myaddr, unsigned int len)
+{
+  char filename[PATH_MAX];
+  int fd, n;
+
+  snprintf (filename, sizeof filename, "/proc/%d/auxv", inferior_pid);
+
+  fd = open (filename, O_RDONLY);
+  if (fd < 0)
+    return -1;
+
+  if (offset != (CORE_ADDR) 0
+      && lseek (fd, (off_t) offset, SEEK_SET) != (off_t) offset)
+    n = -1;
+  else
+    n = read (fd, myaddr, len);
+
+  close (fd);
+
+  return n;
+}
+
 \f
 static struct target_ops linux_target_ops = {
   linux_create_inferior,
@@ -1396,6 +1422,7 @@ static struct target_ops linux_target_op
   linux_write_memory,
   linux_look_up_symbols,
   linux_send_signal,
+  linux_read_auxv,
 };
 
 static void
Index: gdbserver/server.c
===================================================================
RCS file: /cvs/src/src/gdb/gdbserver/server.c,v
retrieving revision 1.16
diff -b -p -u -r1.16 server.c
--- gdbserver/server.c	13 Oct 2003 16:17:21 -0000	1.16
+++ gdbserver/server.c	25 Feb 2004 19:38:03 -0000
@@ -120,6 +120,26 @@ handle_query (char *own_buf)
 	}
     }
       
+  if (the_target->read_auxv != NULL
+      && strncmp ("qPart:auxv:read::", own_buf, 17) == 0)
+    {
+      char data[(PBUFSIZ - 1) / 2];
+      CORE_ADDR ofs;
+      unsigned int len;
+      int n;
+      decode_m_packet (&own_buf[17], &ofs, &len); /* "OFS,LEN" */
+      if (len > sizeof data)
+	len = sizeof data;
+      n = (*the_target->read_auxv) (ofs, data, len);
+      if (n == 0)
+	strcpy (own_buf, "OK");
+      else if (n < 0)
+	write_enn (own_buf);
+      else
+	convert_int_to_ascii (data, own_buf, n);
+      return;
+    }
+
   /* Otherwise we didn't know what packet it was.  Say we didn't
      understand it.  */
   own_buf[0] = 0;
Index: gdbserver/target.h
===================================================================
RCS file: /cvs/src/src/gdb/gdbserver/target.h,v
retrieving revision 1.8
diff -b -p -u -r1.8 target.h
--- gdbserver/target.h	13 Oct 2003 16:17:21 -0000	1.8
+++ gdbserver/target.h	25 Feb 2004 19:38:03 -0000
@@ -125,6 +125,12 @@ struct target_ops
 
   /* Send a signal to the inferior process, however is appropriate.  */
   void (*send_signal) (int);
+
+  /* Read auxiliary vector data from the inferior process.
+
+     Read LEN bytes at OFFSET into a buffer at MYADDR.  */
+
+  int (*read_auxv) (CORE_ADDR offset, char *myaddr, unsigned int len);
 };
 
 extern struct target_ops *the_target;


             reply	other threads:[~2004-02-25 19:42 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-02-25 19:42 Roland McGrath [this message]
2004-02-25 20:15 ` Andrew Cagney
2004-02-25 20:43   ` Roland McGrath
2004-02-25 20:20 ` Daniel Jacobowitz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200402251941.i1PJfx4p004863@magilla.sf.frob.com \
    --to=roland@redhat.com \
    --cc=gdb-patches@sources.redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox