From: Nathanael Nerode <neroden@twcny.rr.com>
To: gcc-patches@gcc.gnu.org
Cc: dj@redhat.com, binutils@sources.redhat.com,
gdb-patches@sources.redhat.com
Subject: Top level: convert target module targets to autogen style
Date: Wed, 13 Nov 2002 07:18:00 -0000 [thread overview]
Message-ID: <20021113151801.GA30267@doctormoo> (raw)
This change converts the target modules targets in Makefile.tpl to my
preferred style. This shortens Makefile.tpl while lengthening Makefile.in.
It should also make 'make' invocations faster, although it may not be a
significant difference.
The main point is the replacement of $${dir}, computed at make time,
with [+module+], computed at autogen time.
I intend to perform a similar conversion with the host modules targets and
the build module targets, but there are a few additional issues which need
to be worked out first.
After these conversions, I can set up host modules to configure in the
Makefile, following which actual autoconfiscation can take place. There are
also additional shortenings to the embedded shell code in the Makefile which
can't be made yet, but will be able to be made soon.
If approved, this goes in gcc 3.4 bib, and will hit src when that branch hits
mainline gcc (sometime soon after gcc 3.3 branches).
Tested extensively on i686-pc-linux-gnu, all good.
* Makefile.tpl: Convert make macros and sh variables to Autogen.
* Makefile.in: Regenerate.
Index: Makefile.in
===================================================================
RCS file: /cvs/gcc/gcc/Makefile.in,v
retrieving revision 1.111.4.8
diff -u -r1.111.4.8 Makefile.in
--- Makefile.in 12 Nov 2002 22:09:15 -0000 1.111.4.8
+++ Makefile.in 13 Nov 2002 15:05:57 -0000
@@ -1351,36 +1351,2075 @@
true; \
fi
-# This rule is used to configure the modules which are built with the
-# target tools.
-.PHONY: $(CONFIGURE_TARGET_MODULES)
-$(CONFIGURE_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/configure-target-//'`; \
- if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
+# These rules are used to build the modules which are built with the target
+# tools. To make foo-X means to cd to X and make foo.
+
+.PHONY: configure-target-libstdc++-v3
+configure-target-libstdc++-v3:
+ if [ -d $(TARGET_SUBDIR)/libstdc++-v3 ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libstdc++-v3/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libstdc++-v3/multilib.out $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libstdc++-v3, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libstdc++-v3/multilib.out $(TARGET_SUBDIR)/libstdc++-v3/Makefile; \
+ mv $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libstdc++-v3/tmpmulti.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libstdc++-v3 " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libstdc++-v3 ]; then \
+ [ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libstdc++-v3; \
+ cd "$(TARGET_SUBDIR)/libstdc++-v3" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libstdc++-v3 "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libstdc++-v3"; \
+ libsrcdir="$$s/libstdc++-v3"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libstdc++-v3 || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libstdc++-v3
+all-target-libstdc++-v3:
+ if [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libstdc++-v3; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libstdc++-v3
+check-target-libstdc++-v3:
+ if [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libstdc++-v3; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libstdc++-v3
+install-target-libstdc++-v3: installdirs
+ if [ -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libstdc++-v3; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-newlib
+configure-target-newlib:
+ if [ -d $(TARGET_SUBDIR)/newlib ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/newlib/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/newlib/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/newlib/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/newlib/multilib.out $(TARGET_SUBDIR)/newlib/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/newlib/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for newlib, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/newlib/multilib.out $(TARGET_SUBDIR)/newlib/Makefile; \
+ mv $(TARGET_SUBDIR)/newlib/tmpmulti.out $(TARGET_SUBDIR)/newlib/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/newlib/tmpmulti.out $(TARGET_SUBDIR)/newlib/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " newlib " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/newlib ]; then \
+ [ -d $(TARGET_SUBDIR)/newlib ] || mkdir $(TARGET_SUBDIR)/newlib;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/newlib; \
+ cd "$(TARGET_SUBDIR)/newlib" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/newlib "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/newlib"; \
+ libsrcdir="$$s/newlib"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir newlib || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-newlib
+all-target-newlib:
+ if [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/newlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-newlib
+check-target-newlib:
+ if [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/newlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-newlib
+install-target-newlib: installdirs
+ if [ -f $(TARGET_SUBDIR)/newlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/newlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libf2c
+configure-target-libf2c:
+ if [ -d $(TARGET_SUBDIR)/libf2c ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libf2c/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libf2c/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libf2c/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libf2c/multilib.out $(TARGET_SUBDIR)/libf2c/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libf2c/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libf2c, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libf2c/multilib.out $(TARGET_SUBDIR)/libf2c/Makefile; \
+ mv $(TARGET_SUBDIR)/libf2c/tmpmulti.out $(TARGET_SUBDIR)/libf2c/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libf2c/tmpmulti.out $(TARGET_SUBDIR)/libf2c/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libf2c " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libf2c ]; then \
+ [ -d $(TARGET_SUBDIR)/libf2c ] || mkdir $(TARGET_SUBDIR)/libf2c;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libf2c; \
+ cd "$(TARGET_SUBDIR)/libf2c" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libf2c "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libf2c"; \
+ libsrcdir="$$s/libf2c"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libf2c || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libf2c
+all-target-libf2c:
+ if [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libf2c; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libf2c
+check-target-libf2c:
+ if [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libf2c; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libf2c
+install-target-libf2c: installdirs
+ if [ -f $(TARGET_SUBDIR)/libf2c/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libf2c; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libobjc
+configure-target-libobjc:
+ if [ -d $(TARGET_SUBDIR)/libobjc ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libobjc/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libobjc/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libobjc/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libobjc/multilib.out $(TARGET_SUBDIR)/libobjc/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libobjc/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libobjc, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libobjc/multilib.out $(TARGET_SUBDIR)/libobjc/Makefile; \
+ mv $(TARGET_SUBDIR)/libobjc/tmpmulti.out $(TARGET_SUBDIR)/libobjc/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libobjc/tmpmulti.out $(TARGET_SUBDIR)/libobjc/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libobjc " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libobjc ]; then \
+ [ -d $(TARGET_SUBDIR)/libobjc ] || mkdir $(TARGET_SUBDIR)/libobjc;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libobjc; \
+ cd "$(TARGET_SUBDIR)/libobjc" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libobjc "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libobjc"; \
+ libsrcdir="$$s/libobjc"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libobjc || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libobjc
+all-target-libobjc:
+ if [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libobjc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libobjc
+check-target-libobjc:
+ if [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libobjc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libobjc
+install-target-libobjc: installdirs
+ if [ -f $(TARGET_SUBDIR)/libobjc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libobjc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libtermcap
+configure-target-libtermcap:
+ if [ -d $(TARGET_SUBDIR)/libtermcap ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libtermcap/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libtermcap/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libtermcap/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libtermcap/multilib.out $(TARGET_SUBDIR)/libtermcap/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libtermcap/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libtermcap, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libtermcap/multilib.out $(TARGET_SUBDIR)/libtermcap/Makefile; \
+ mv $(TARGET_SUBDIR)/libtermcap/tmpmulti.out $(TARGET_SUBDIR)/libtermcap/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libtermcap/tmpmulti.out $(TARGET_SUBDIR)/libtermcap/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libtermcap " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libtermcap ]; then \
+ [ -d $(TARGET_SUBDIR)/libtermcap ] || mkdir $(TARGET_SUBDIR)/libtermcap;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libtermcap; \
+ cd "$(TARGET_SUBDIR)/libtermcap" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libtermcap "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
v+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libtermcap"; \
+ libsrcdir="$$s/libtermcap"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libtermcap || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libtermcap
+all-target-libtermcap:
+ if [ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libtermcap; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libtermcap
+install-target-libtermcap: installdirs
+ if [ -f $(TARGET_SUBDIR)/libtermcap/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libtermcap; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-winsup
+configure-target-winsup:
+ if [ -d $(TARGET_SUBDIR)/winsup ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/winsup/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/winsup/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/winsup/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/winsup/multilib.out $(TARGET_SUBDIR)/winsup/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/winsup/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for winsup, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/winsup/multilib.out $(TARGET_SUBDIR)/winsup/Makefile; \
+ mv $(TARGET_SUBDIR)/winsup/tmpmulti.out $(TARGET_SUBDIR)/winsup/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/winsup/tmpmulti.out $(TARGET_SUBDIR)/winsup/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " winsup " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/winsup ]; then \
+ [ -d $(TARGET_SUBDIR)/winsup ] || mkdir $(TARGET_SUBDIR)/winsup;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/winsup; \
+ cd "$(TARGET_SUBDIR)/winsup" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/winsup "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/winsup"; \
+ libsrcdir="$$s/winsup"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir winsup || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-winsup
+all-target-winsup:
+ if [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/winsup; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-winsup
+check-target-winsup:
+ if [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/winsup; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-winsup
+install-target-winsup: installdirs
+ if [ -f $(TARGET_SUBDIR)/winsup/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/winsup; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libgloss
+configure-target-libgloss:
+ if [ -d $(TARGET_SUBDIR)/libgloss ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libgloss/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libgloss/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libgloss/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libgloss/multilib.out $(TARGET_SUBDIR)/libgloss/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libgloss/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libgloss, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libgloss/multilib.out $(TARGET_SUBDIR)/libgloss/Makefile; \
+ mv $(TARGET_SUBDIR)/libgloss/tmpmulti.out $(TARGET_SUBDIR)/libgloss/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libgloss/tmpmulti.out $(TARGET_SUBDIR)/libgloss/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libgloss/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libgloss " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libgloss ]; then \
+ [ -d $(TARGET_SUBDIR)/libgloss ] || mkdir $(TARGET_SUBDIR)/libgloss;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libgloss; \
+ cd "$(TARGET_SUBDIR)/libgloss" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libgloss "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libgloss"; \
+ libsrcdir="$$s/libgloss"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libgloss || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libgloss
+all-target-libgloss:
+ if [ -f $(TARGET_SUBDIR)/libgloss/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libgloss; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libgloss
+install-target-libgloss: installdirs
+ if [ -f $(TARGET_SUBDIR)/libgloss/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libgloss; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-libiberty
+configure-target-libiberty:
+ if [ -d $(TARGET_SUBDIR)/libiberty ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libiberty/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libiberty/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libiberty/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libiberty/multilib.out $(TARGET_SUBDIR)/libiberty/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libiberty/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libiberty, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libiberty/multilib.out $(TARGET_SUBDIR)/libiberty/Makefile; \
+ mv $(TARGET_SUBDIR)/libiberty/tmpmulti.out $(TARGET_SUBDIR)/libiberty/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libiberty/tmpmulti.out $(TARGET_SUBDIR)/libiberty/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libiberty " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libiberty ]; then \
+ [ -d $(TARGET_SUBDIR)/libiberty ] || mkdir $(TARGET_SUBDIR)/libiberty;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libiberty; \
+ cd "$(TARGET_SUBDIR)/libiberty" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libiberty "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libiberty"; \
+ libsrcdir="$$s/libiberty"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libiberty || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libiberty
+all-target-libiberty:
+ if [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libiberty; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libiberty
+check-target-libiberty:
+ if [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libiberty; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libiberty
+install-target-libiberty: installdirs
+ if [ -f $(TARGET_SUBDIR)/libiberty/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libiberty; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-gperf
+configure-target-gperf:
+ if [ -d $(TARGET_SUBDIR)/gperf ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/gperf/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/gperf/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/gperf/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/gperf/multilib.out $(TARGET_SUBDIR)/gperf/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/gperf/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for gperf, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/gperf/multilib.out $(TARGET_SUBDIR)/gperf/Makefile; \
+ mv $(TARGET_SUBDIR)/gperf/tmpmulti.out $(TARGET_SUBDIR)/gperf/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/gperf/tmpmulti.out $(TARGET_SUBDIR)/gperf/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " gperf " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/gperf ]; then \
+ [ -d $(TARGET_SUBDIR)/gperf ] || mkdir $(TARGET_SUBDIR)/gperf;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/gperf; \
+ cd "$(TARGET_SUBDIR)/gperf" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/gperf "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/gperf"; \
+ libsrcdir="$$s/gperf"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir gperf || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-gperf
+all-target-gperf:
+ if [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/gperf; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-gperf
+check-target-gperf:
+ if [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/gperf; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-gperf
+install-target-gperf: installdirs
+ if [ -f $(TARGET_SUBDIR)/gperf/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/gperf; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-examples
+configure-target-examples:
+ if [ -d $(TARGET_SUBDIR)/examples ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/examples/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/examples/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/examples/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/examples/multilib.out $(TARGET_SUBDIR)/examples/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/examples/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for examples, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/examples/multilib.out $(TARGET_SUBDIR)/examples/Makefile; \
+ mv $(TARGET_SUBDIR)/examples/tmpmulti.out $(TARGET_SUBDIR)/examples/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/examples/tmpmulti.out $(TARGET_SUBDIR)/examples/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/examples/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " examples " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/examples ]; then \
+ [ -d $(TARGET_SUBDIR)/examples ] || mkdir $(TARGET_SUBDIR)/examples;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/examples; \
+ cd "$(TARGET_SUBDIR)/examples" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/examples "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/examples"; \
+ libsrcdir="$$s/examples"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir examples || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-examples
+all-target-examples:
+ if [ -f $(TARGET_SUBDIR)/examples/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/examples; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+
+
+.PHONY: configure-target-libffi
+configure-target-libffi:
+ if [ -d $(TARGET_SUBDIR)/libffi ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libffi/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libffi/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libffi/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libffi/multilib.out $(TARGET_SUBDIR)/libffi/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libffi/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libffi, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libffi/multilib.out $(TARGET_SUBDIR)/libffi/Makefile; \
+ mv $(TARGET_SUBDIR)/libffi/tmpmulti.out $(TARGET_SUBDIR)/libffi/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libffi/tmpmulti.out $(TARGET_SUBDIR)/libffi/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libffi/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libffi " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libffi ]; then \
+ [ -d $(TARGET_SUBDIR)/libffi ] || mkdir $(TARGET_SUBDIR)/libffi;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libffi; \
+ cd "$(TARGET_SUBDIR)/libffi" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libffi "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libffi"; \
+ libsrcdir="$$s/libffi"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libffi || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libffi
+all-target-libffi:
+ if [ -f $(TARGET_SUBDIR)/libffi/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libffi; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libffi
+check-target-libffi:
+ if [ -f $(TARGET_SUBDIR)/libffi/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libffi; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+
+
+.PHONY: configure-target-libjava
+configure-target-libjava:
+ if [ -d $(TARGET_SUBDIR)/libjava ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/libjava/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/libjava/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/libjava/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/libjava/multilib.out $(TARGET_SUBDIR)/libjava/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/libjava/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for libjava, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/libjava/multilib.out $(TARGET_SUBDIR)/libjava/Makefile; \
+ mv $(TARGET_SUBDIR)/libjava/tmpmulti.out $(TARGET_SUBDIR)/libjava/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/libjava/tmpmulti.out $(TARGET_SUBDIR)/libjava/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " libjava " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/libjava ]; then \
+ [ -d $(TARGET_SUBDIR)/libjava ] || mkdir $(TARGET_SUBDIR)/libjava;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/libjava; \
+ cd "$(TARGET_SUBDIR)/libjava" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/libjava "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/libjava"; \
+ libsrcdir="$$s/libjava"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir libjava || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-libjava
+all-target-libjava:
+ if [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libjava; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-libjava
+check-target-libjava:
+ if [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libjava; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-libjava
+install-target-libjava: installdirs
+ if [ -f $(TARGET_SUBDIR)/libjava/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/libjava; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-zlib
+configure-target-zlib:
+ if [ -d $(TARGET_SUBDIR)/zlib ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/zlib/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/zlib/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/zlib/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/zlib/multilib.out $(TARGET_SUBDIR)/zlib/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/zlib/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for zlib, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/zlib/multilib.out $(TARGET_SUBDIR)/zlib/Makefile; \
+ mv $(TARGET_SUBDIR)/zlib/tmpmulti.out $(TARGET_SUBDIR)/zlib/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/zlib/tmpmulti.out $(TARGET_SUBDIR)/zlib/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " zlib " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/zlib ]; then \
+ [ -d $(TARGET_SUBDIR)/zlib ] || mkdir $(TARGET_SUBDIR)/zlib;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/zlib; \
+ cd "$(TARGET_SUBDIR)/zlib" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/zlib "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/zlib"; \
+ libsrcdir="$$s/zlib"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir zlib || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-zlib
+all-target-zlib:
+ if [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/zlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-zlib
+check-target-zlib:
+ if [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/zlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-zlib
+install-target-zlib: installdirs
+ if [ -f $(TARGET_SUBDIR)/zlib/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/zlib; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-boehm-gc
+configure-target-boehm-gc:
+ if [ -d $(TARGET_SUBDIR)/boehm-gc ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/boehm-gc/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/boehm-gc/multilib.out $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for boehm-gc, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/boehm-gc/multilib.out $(TARGET_SUBDIR)/boehm-gc/Makefile; \
+ mv $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out $(TARGET_SUBDIR)/boehm-gc/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/boehm-gc/tmpmulti.out $(TARGET_SUBDIR)/boehm-gc/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " boehm-gc " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/boehm-gc ]; then \
+ [ -d $(TARGET_SUBDIR)/boehm-gc ] || mkdir $(TARGET_SUBDIR)/boehm-gc;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/boehm-gc; \
+ cd "$(TARGET_SUBDIR)/boehm-gc" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/boehm-gc "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/boehm-gc"; \
+ libsrcdir="$$s/boehm-gc"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir boehm-gc || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-boehm-gc
+all-target-boehm-gc:
+ if [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/boehm-gc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-boehm-gc
+check-target-boehm-gc:
+ if [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/boehm-gc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-boehm-gc
+install-target-boehm-gc: installdirs
+ if [ -f $(TARGET_SUBDIR)/boehm-gc/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/boehm-gc; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-qthreads
+configure-target-qthreads:
+ if [ -d $(TARGET_SUBDIR)/qthreads ]; then \
+ r=`${PWD}`; export r; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/qthreads/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/qthreads/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/qthreads/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/qthreads/multilib.out $(TARGET_SUBDIR)/qthreads/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/qthreads/tmpmulti.out; \
+ else \
+ echo "Multilibs changed for qthreads, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/qthreads/multilib.out $(TARGET_SUBDIR)/qthreads/Makefile; \
+ mv $(TARGET_SUBDIR)/qthreads/tmpmulti.out $(TARGET_SUBDIR)/qthreads/multilib.out; \
+ fi; \
+ else \
+ mv $(TARGET_SUBDIR)/qthreads/tmpmulti.out $(TARGET_SUBDIR)/qthreads/multilib.out; \
+ fi; \
+ fi; \
+ fi; exit 0 # break command into two pieces
+ if [ ! -d $(TARGET_SUBDIR) ]; then \
+ true; \
+ elif [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \
+ true; \
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " qthreads " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/qthreads ]; then \
+ [ -d $(TARGET_SUBDIR)/qthreads ] || mkdir $(TARGET_SUBDIR)/qthreads;\
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ AR="$(AR_FOR_TARGET)"; export AR; \
+ AS="$(AS_FOR_TARGET)"; export AS; \
+ CC="$(CC_FOR_TARGET)"; export CC; \
+ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
+ CXX="$(CXX_FOR_TARGET)"; export CXX; \
+ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
+ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
+ LD="$(LD_FOR_TARGET)"; export LD; \
+ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
+ NM="$(NM_FOR_TARGET)"; export NM; \
+ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
+ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
+ echo Configuring in $(TARGET_SUBDIR)/qthreads; \
+ cd "$(TARGET_SUBDIR)/qthreads" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) \
+ topdir=$(srcdir) ;; \
+ *) \
+ case "$(TARGET_SUBDIR)" in \
+ .) topdir="../$(srcdir)" ;; \
+ *) topdir="../../$(srcdir)" ;; \
+ esac ;; \
+ esac; \
+ if [ "$(srcdir)" = "." ] ; then \
+ if [ "$(TARGET_SUBDIR)" != "." ] ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/qthreads "no-such-file" ; then \
+ if [ -f Makefile ]; then \
+ if $(MAKE) distclean; then \
+ true; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ exit 1; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ srcdiroption="--srcdir=."; \
+ libsrcdir="."; \
+ else \
+ srcdiroption="--srcdir=$${topdir}/qthreads"; \
+ libsrcdir="$$s/qthreads"; \
+ fi; \
+ if [ -f $${libsrcdir}/configure ] ; then \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ else \
+ rm -f no-such-file skip-this-dir; \
+ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
+ $(TARGET_CONFIGARGS) $${srcdiroption} \
+ --with-target-subdir="$(TARGET_SUBDIR)"; \
+ fi || exit 1; \
+ if [ -f skip-this-dir ] ; then \
+ sh skip-this-dir; \
+ rm -f skip-this-dir; \
+ cd ..; rmdir qthreads || true; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi; \
+ else \
+ true; \
+ fi
+
+.PHONY: all-target-qthreads
+all-target-qthreads:
+ if [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/qthreads; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ else \
+ true; \
+ fi
+
+.PHONY: check-target-qthreads
+check-target-qthreads:
+ if [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/qthreads; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ else \
+ true; \
+ fi
+
+\
+.PHONY: install-target-qthreads
+install-target-qthreads: installdirs
+ if [ -f $(TARGET_SUBDIR)/qthreads/Makefile ] ; then \
+ r=`${PWD}`; export r; \
+ s=`cd $(srcdir); ${PWD}`; export s; \
+ $(SET_LIB_PATH) \
+ (cd $(TARGET_SUBDIR)/qthreads; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
+ else \
+ true; \
+ fi
+
+
+.PHONY: configure-target-rda
+configure-target-rda:
+ if [ -d $(TARGET_SUBDIR)/rda ]; then \
r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/rda/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/rda/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/rda/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/rda/multilib.out $(TARGET_SUBDIR)/rda/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/rda/tmpmulti.out; \
else \
- echo "Multilibs changed for $${dir}, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
- mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ echo "Multilibs changed for rda, reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/rda/multilib.out $(TARGET_SUBDIR)/rda/Makefile; \
+ mv $(TARGET_SUBDIR)/rda/tmpmulti.out $(TARGET_SUBDIR)/rda/multilib.out; \
fi; \
else \
- mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ mv $(TARGET_SUBDIR)/rda/tmpmulti.out $(TARGET_SUBDIR)/rda/multilib.out; \
fi; \
fi; \
fi; exit 0 # break command into two pieces
- @dir=`echo $@ | sed -e 's/configure-target-//'`; \
if [ ! -d $(TARGET_SUBDIR) ]; then \
true; \
- elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ elif [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \
true; \
- elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
- if [ -d $(srcdir)/$${dir} ]; then \
- [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " rda " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/rda ]; then \
+ [ -d $(TARGET_SUBDIR)/rda ] || mkdir $(TARGET_SUBDIR)/rda;\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
@@ -1397,8 +3436,8 @@
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
- echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
- cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
+ echo Configuring in $(TARGET_SUBDIR)/rda; \
+ cd "$(TARGET_SUBDIR)/rda" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
@@ -1410,7 +3449,7 @@
esac; \
if [ "$(srcdir)" = "." ] ; then \
if [ "$(TARGET_SUBDIR)" != "." ] ; then \
- if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/rda "no-such-file" ; then \
if [ -f Makefile ]; then \
if $(MAKE) distclean; then \
true; \
@@ -1429,8 +3468,8 @@
srcdiroption="--srcdir=."; \
libsrcdir="."; \
else \
- srcdiroption="--srcdir=$${topdir}/$${dir}"; \
- libsrcdir="$$s/$${dir}"; \
+ srcdiroption="--srcdir=$${topdir}/rda"; \
+ libsrcdir="$$s/rda"; \
fi; \
if [ -f $${libsrcdir}/configure ] ; then \
rm -f no-such-file skip-this-dir; \
@@ -1446,7 +3485,7 @@
if [ -f skip-this-dir ] ; then \
sh skip-this-dir; \
rm -f skip-this-dir; \
- cd ..; rmdir $${dir} || true; \
+ cd ..; rmdir rda || true; \
else \
true; \
fi; \
@@ -1457,51 +3496,44 @@
true; \
fi
-# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
-# To build a target all-X means to cd to X and make all.
-.PHONY: $(ALL_TARGET_MODULES)
-$(ALL_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/all-target-//'`; \
- if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+.PHONY: all-target-rda
+all-target-rda:
+ if [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; \
+ (cd $(TARGET_SUBDIR)/rda; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
-# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
-# To build a target install-X means to cd to X and make install.
-.PHONY: $(CHECK_TARGET_MODULES)
-$(CHECK_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/check-target-//'`; \
- if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+.PHONY: check-target-rda
+check-target-rda:
+ if [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; \
+ (cd $(TARGET_SUBDIR)/rda; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
-# This rule is used to install the modules which use
-# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
-# and make install.
-.PHONY: $(INSTALL_TARGET_MODULES)
-$(INSTALL_TARGET_MODULES): installdirs
- @dir=`echo $@ | sed -e 's/install-target-//'`; \
- if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+\
+.PHONY: install-target-rda
+install-target-rda: installdirs
+ if [ -f $(TARGET_SUBDIR)/rda/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; \
+ (cd $(TARGET_SUBDIR)/rda; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
+
+
# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
Index: Makefile.tpl
===================================================================
RCS file: /cvs/gcc/gcc/Makefile.tpl,v
retrieving revision 1.5.2.6
diff -u -r1.5.2.6 Makefile.tpl
--- Makefile.tpl 12 Nov 2002 22:09:15 -0000 1.5.2.6
+++ Makefile.tpl 13 Nov 2002 15:05:58 -0000
@@ -1041,36 +1041,35 @@
true; \
fi
-# This rule is used to configure the modules which are built with the
-# target tools.
-.PHONY: $(CONFIGURE_TARGET_MODULES)
-$(CONFIGURE_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/configure-target-//'`; \
- if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \
+# These rules are used to build the modules which are built with the target
+# tools. To make foo-X means to cd to X and make foo.
+[+ FOR target_modules +]
+.PHONY: configure-target-[+module+]
+configure-target-[+module+]:
+ if [ -d $(TARGET_SUBDIR)/[+module+] ]; then \
r=`${PWD}`; export r; \
- $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \
- if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \
- if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \
- if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \
- rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \
+ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/[+module+]/tmpmulti.out 2> /dev/null; \
+ if [ -s $(TARGET_SUBDIR)/[+module+]/tmpmulti.out ]; then \
+ if [ -f $(TARGET_SUBDIR)/[+module+]/multilib.out ]; then \
+ if cmp $(TARGET_SUBDIR)/[+module+]/multilib.out $(TARGET_SUBDIR)/[+module+]/tmpmulti.out > /dev/null; then \
+ rm -f $(TARGET_SUBDIR)/[+module+]/tmpmulti.out; \
else \
- echo "Multilibs changed for $${dir}, reconfiguring"; \
- rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \
- mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ echo "Multilibs changed for [+module+], reconfiguring"; \
+ rm -f $(TARGET_SUBDIR)/[+module+]/multilib.out $(TARGET_SUBDIR)/[+module+]/Makefile; \
+ mv $(TARGET_SUBDIR)/[+module+]/tmpmulti.out $(TARGET_SUBDIR)/[+module+]/multilib.out; \
fi; \
else \
- mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \
+ mv $(TARGET_SUBDIR)/[+module+]/tmpmulti.out $(TARGET_SUBDIR)/[+module+]/multilib.out; \
fi; \
fi; \
fi; exit 0 # break command into two pieces
- @dir=`echo $@ | sed -e 's/configure-target-//'`; \
if [ ! -d $(TARGET_SUBDIR) ]; then \
true; \
- elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+ elif [ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] ; then \
true; \
- elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \
- if [ -d $(srcdir)/$${dir} ]; then \
- [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\
+ elif echo " $(TARGET_CONFIGDIRS) " | grep " [+module+] " >/dev/null 2>&1; then \
+ if [ -d $(srcdir)/[+module+] ]; then \
+ [ -d $(TARGET_SUBDIR)/[+module+] ] || mkdir $(TARGET_SUBDIR)/[+module+];\
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
@@ -1087,8 +1086,8 @@
NM="$(NM_FOR_TARGET)"; export NM; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
- echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
- cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
+ echo Configuring in $(TARGET_SUBDIR)/[+module+]; \
+ cd "$(TARGET_SUBDIR)/[+module+]" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
@@ -1100,7 +1099,7 @@
esac; \
if [ "$(srcdir)" = "." ] ; then \
if [ "$(TARGET_SUBDIR)" != "." ] ; then \
- if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \
+ if $(SHELL) $$s/symlink-tree $${topdir}/[+module+] "no-such-file" ; then \
if [ -f Makefile ]; then \
if $(MAKE) distclean; then \
true; \
@@ -1119,8 +1118,8 @@
srcdiroption="--srcdir=."; \
libsrcdir="."; \
else \
- srcdiroption="--srcdir=$${topdir}/$${dir}"; \
- libsrcdir="$$s/$${dir}"; \
+ srcdiroption="--srcdir=$${topdir}/[+module+]"; \
+ libsrcdir="$$s/[+module+]"; \
fi; \
if [ -f $${libsrcdir}/configure ] ; then \
rm -f no-such-file skip-this-dir; \
@@ -1136,7 +1135,7 @@
if [ -f skip-this-dir ] ; then \
sh skip-this-dir; \
rm -f skip-this-dir; \
- cd ..; rmdir $${dir} || true; \
+ cd ..; rmdir [+module+] || true; \
else \
true; \
fi; \
@@ -1147,51 +1146,44 @@
true; \
fi
-# This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
-# To build a target all-X means to cd to X and make all.
-.PHONY: $(ALL_TARGET_MODULES)
-$(ALL_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/all-target-//'`; \
- if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+.PHONY: all-target-[+module+]
+all-target-[+module+]:
+ if [ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; \
+ (cd $(TARGET_SUBDIR)/[+module+]; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
-
-# This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
-# To build a target install-X means to cd to X and make install.
-.PHONY: $(CHECK_TARGET_MODULES)
-$(CHECK_TARGET_MODULES):
- @dir=`echo $@ | sed -e 's/check-target-//'`; \
- if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+[+ IF no_check +][+ ELSE check +]
+.PHONY: check-target-[+module+]
+check-target-[+module+]:
+ if [ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; \
+ (cd $(TARGET_SUBDIR)/[+module+]; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
-
-# This rule is used to install the modules which use
-# TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
-# and make install.
-.PHONY: $(INSTALL_TARGET_MODULES)
-$(INSTALL_TARGET_MODULES): installdirs
- @dir=`echo $@ | sed -e 's/install-target-//'`; \
- if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \
+[+ ENDIF no_check +]
+[+ IF no_install +][+ ELSE install +]\
+.PHONY: install-target-[+module+]
+install-target-[+module+]: installdirs
+ if [ -f $(TARGET_SUBDIR)/[+module+]/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; \
+ (cd $(TARGET_SUBDIR)/[+module+]; \
$(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
else \
true; \
fi
+[+ ENDIF no_install +]
+[+ ENDFOR target_modules +]
# This rule is used to build the modules which use X11_FLAGS_TO_PASS.
# To build a target all-X means to cd to X and make all.
reply other threads:[~2002-11-13 15:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20021113151801.GA30267@doctormoo \
--to=neroden@twcny.rr.com \
--cc=binutils@sources.redhat.com \
--cc=dj@redhat.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=gdb-patches@sources.redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox