From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (qmail 15770 invoked by alias); 22 Sep 2002 02:20:22 -0000 Mailing-List: contact gdb-patches-help@sources.redhat.com; run by ezmlm Precedence: bulk List-Subscribe: List-Archive: List-Post: List-Help: , Sender: gdb-patches-owner@sources.redhat.com Received: (qmail 15559 invoked from network); 22 Sep 2002 02:20:18 -0000 Received: from unknown (HELO nerodeguest) (24.161.107.98) by sources.redhat.com with SMTP; 22 Sep 2002 02:20:18 -0000 Received: from neroden by nerodeguest with local (Exim 3.35 #1 (Debian)) id 17swI0-00049j-00; Sat, 21 Sep 2002 22:16:04 -0400 Date: Sat, 21 Sep 2002 19:20:00 -0000 To: gcc-patches@gcc.gnu.org Cc: gdb-patches@sources.redhat.com, binutils@sources.redhat.com, dj@redhat.com Subject: toplevel Makefile.in: generate with autogen Message-ID: <20020922021604.GA32268@doctormoo.dyndns.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="gBBFr7Ir9EOA20Yy" Content-Disposition: inline User-Agent: Mutt/1.4i From: Nathanael Nerode X-SW-Source: 2002-09/txt/msg00552.txt.bz2 --gBBFr7Ir9EOA20Yy Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-length: 2058 This change causes toplevel Makefile.in to be generated by autogen from Makefile.tpl and Makefile.def; consensus was reached a while back that this was a reasonable thing to do. Makefile.tpl is a 'model' for Makefile.in. It contains several autogen FOR statements, which generate some of the repetitive lists of 'all-x all-y all-z'. This is the first in several steps in cleaning up the toplevel Makefile for autoconfiscation. I was originally going to do them all at once, but I decided there was value in doing it incrementally. This first step doesn't change much. It *reorders* some of the entries in Makefile.in, and that diff is attached. Since that's all it does, except for the deletion of the bogus target check-mmcheckoc, it should be a very safe change. I am currently bootstrapping an ubertree to try to check that I didn't lose any implicit dependencies. If I *have* lost any implicit dependencies, they should be recreated as *explicit* dependencies in the makefile. The major advantage, however, is the reduction in the number of lists of modules present in the makefile. This makes it much easier to catch stupid errors like 'check-mmcheckoc'. (Note that mmalloc has check disabled in the new file since it proved not to be working!) Once the files Makefile.tpl and Makefile.def *exist* in gcc & src, it also becomes easier for me to do experimental improvements without dropping them into mainline gcc/src. Future steps in 'autogenification' involve: * generating more of the lists ; pulling more from Makefile.tpl to Makefile.def * Eliminating Make macro speed penalties, and reducing the length of embedded shell code in Make rules, by generating separate rules for each target using autogen. * Separating the lists of targets which 'all', 'install', etc. depend on from the collection of all-x targets which exist. * Generating the lists of targets which 'all', 'install', etc. depend on using configure; then the targets' rules can assume that their directories exist and are configured, saving more shell code. --gBBFr7Ir9EOA20Yy Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="Makefile.tpl" Content-length: 60344 [+ AutoGen5 template in +] # Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'. # # Makefile for directory with subdirs to build. # Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, # 1999, 2000, 2001, 2002 Free Software Foundation # # This file is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # Tell GNU make 3.79 not to run the top level in parallel. This # prevents contention for $builddir/$target/config.cache, as well # as minimizing scatter in file system caches. NOTPARALLEL = .NOTPARALLEL $(NOTPARALLEL): srcdir = . prefix = /usr/local exec_prefix = $(prefix) bindir=${exec_prefix}/bin sbindir=${exec_prefix}/sbin libexecdir=${exec_prefix}/libexec datadir=${prefix}/share sysconfdir=${prefix}/etc sharedstatedir=${prefix}/com localstatedir=${prefix}/var libdir=${exec_prefix}/lib includedir=${prefix}/include oldincludedir=/usr/include infodir=${prefix}/info mandir=${prefix}/man gxx_include_dir=${includedir}/g++ tooldir = $(exec_prefix)/$(target_alias) build_tooldir = $(exec_prefix)/$(target_alias) program_transform_name = man1dir = $(mandir)/man1 man2dir = $(mandir)/man2 man3dir = $(mandir)/man3 man4dir = $(mandir)/man4 man5dir = $(mandir)/man5 man6dir = $(mandir)/man6 man7dir = $(mandir)/man7 man8dir = $(mandir)/man8 man9dir = $(mandir)/man9 infodir = $(prefix)/info includedir = $(prefix)/include # Directory in which the compiler finds executables, libraries, etc. libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(gcc_version) GDB_NLM_DEPS = SHELL = /bin/sh # pwd command to use. Allow user to override default by setting PWDCMD in # the environment to account for automounters. The make variable must not # be called PWDCMD, otherwise the value set here is passed to make # subprocesses and overrides the setting from the user's environment. PWD = $${PWDCMD-pwd} # INSTALL_PROGRAM_ARGS is changed by configure.in to use -x for a # cygwin host. INSTALL_PROGRAM_ARGS = INSTALL = $(SHELL) $$s/install-sh -c INSTALL_PROGRAM = $(INSTALL) $(INSTALL_PROGRAM_ARGS) INSTALL_SCRIPT = $(INSTALL) INSTALL_DATA = $(INSTALL) -m 644 INSTALL_DOSREL = install-dosrel-fake AS = as AR = ar AR_FLAGS = rc CC = cc # Special variables passed down in EXTRA_GCC_FLAGS. They are defined # here so that they can be overridden by Makefile fragments. HOST_CC = $(CC_FOR_BUILD) BUILD_PREFIX = BUILD_PREFIX_1 = loser- # These flag values are normally overridden by the configure script. CFLAGS = -g CXXFLAGS = -g -O2 LDFLAGS = LIBCFLAGS = $(CFLAGS) CFLAGS_FOR_BUILD = $(CFLAGS) # During gcc bootstrap, if we use some random cc for stage1 then # CFLAGS will be just -g. We want to ensure that TARGET libraries # (which we know are built with gcc) are built with optimizations so # prepend -O2 when setting CFLAGS_FOR_TARGET. CFLAGS_FOR_TARGET = -O2 $(CFLAGS) LDFLAGS_FOR_TARGET = LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET) PICFLAG = PICFLAG_FOR_TARGET = CXX = c++ # Use -O2 to stress test the compiler. LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates CXXFLAGS_FOR_TARGET = $(CXXFLAGS) LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates DLLTOOL = dlltool WINDRES = windres NM = nm LD = ld BZIPPROG = bzip2 MD5PROG = md5sum # These values are substituted by configure. DEFAULT_YACC = yacc DEFAULT_LEX = lex DEFAULT_M4 = m4 BISON = `if [ -f $$r/bison/bison ] ; then \ echo $$r/bison/bison -L $$s/bison/ ; \ else \ echo bison ; \ fi` YACC = `if [ -f $$r/bison/bison ] ; then \ echo $$r/bison/bison -y -L $$s/bison/ ; \ elif [ -f $$r/byacc/byacc ] ; then \ echo $$r/byacc/byacc ; \ else \ echo ${DEFAULT_YACC} ; \ fi` LEX = `if [ -f $$r/flex/flex ] ; \ then echo $$r/flex/flex ; \ else echo ${DEFAULT_LEX} ; fi` M4 = `if [ -f $$r/m4/m4 ] ; \ then echo $$r/m4/m4 ; \ else echo ${DEFAULT_M4} ; fi` # For an installed makeinfo, we require it to be from texinfo 4 or # higher, else we use the "missing" dummy. MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \ then echo $$r/texinfo/makeinfo/makeinfo ; \ else if (makeinfo --version \ | egrep 'texinfo[^0-9]*([1-3][0-9]|[4-9])') >/dev/null 2>&1; \ then echo makeinfo; else echo $$s/missing makeinfo; fi; fi` # This just becomes part of the MAKEINFO definition passed down to # sub-makes. It lets flags be given on the command line while still # using the makeinfo from the object tree. MAKEINFOFLAGS = EXPECT = `if [ -f $$r/expect/expect ] ; \ then echo $$r/expect/expect ; \ else echo expect ; fi` RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \ then echo $$s/dejagnu/runtest ; \ else echo runtest ; fi` # compilers to use to create programs which must be run in the build # environment. CC_FOR_BUILD = $(CC) CXX_FOR_BUILD = $(CXX) SUBDIRS = "this is set via configure, don't edit this" OTHERS = # This is set by the configure script to the list of directories which # should be built using the target tools. TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib winsup opcodes libf2c libobjc # Target libraries are put under this directory: # Changed by configure to $(target_alias) if cross. TARGET_SUBDIR = . BUILD_CONFIGDIRS = libiberty BUILD_SUBDIR = . # This is set by the configure script to the arguments to use when configuring # directories built for the target. TARGET_CONFIGARGS = # This is set by the configure script to the arguments to use when configuring # directories built for the build system. BUILD_CONFIGARGS = # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared # was used. SET_LIB_PATH = # This is the name of the environment variable used for the path to # the libraries. This may be changed by configure.in. RPATH_ENVVAR = LD_LIBRARY_PATH # This is the list of directories that may be needed in RPATH_ENVVAR # so that programs built for the host machine work. HOST_LIB_PATH = $$r/bfd:$$r/opcodes # This is the list of directories that may be needed in RPATH_ENVVAR # so that prorgams built for the target machine work. TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs: # configure.in sets SET_LIB_PATH to this if --enable-shared was used. # Some platforms don't like blank entries, so we remove duplicate, # leading and trailing colons. REALLY_SET_LIB_PATH = \ $(RPATH_ENVVAR)=`echo "$(HOST_LIB_PATH):$(TARGET_LIB_PATH):$$$(RPATH_ENVVAR)" | sed 's,::*,:,g;s,^:*,,;s,:*$$,,'`; export $(RPATH_ENVVAR); ALL = all.normal INSTALL_TARGET = installdirs \ install-gcc \ $(INSTALL_MODULES) \ $(INSTALL_TARGET_MODULES) \ $(INSTALL_X11_MODULES) \ $(INSTALL_DOSREL) INSTALL_TARGET_CROSS = installdirs \ install-gcc-cross \ $(INSTALL_MODULES) \ $(INSTALL_TARGET_MODULES) \ $(INSTALL_X11_MODULES) \ $(INSTALL_DOSREL) # Should be substed by configure.in FLAGS_FOR_TARGET = CC_FOR_TARGET = CXX_FOR_TARGET = CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = GCJ_FOR_TARGET = # If GCC_FOR_TARGET is not overriden on the command line, then this # variable is passed down to the gcc Makefile, where it is used to # build libgcc2.a. We define it here so that it can itself be # overridden on the command line. GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) $$r/gcc/xgcc -B$$r/gcc/ $(FLAGS_FOR_TARGET) AS_FOR_TARGET = ` \ if [ -f $$r/gas/as-new ] ; then \ echo $$r/gas/as-new ; \ elif [ -f $$r/gcc/xgcc ]; then \ $(CC_FOR_TARGET) -print-prog-name=as ; \ else \ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(AS); \ else \ t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \ fi; \ fi` LD_FOR_TARGET = ` \ if [ -f $$r/ld/ld-new ] ; then \ echo $$r/ld/ld-new ; \ elif [ -f $$r/gcc/xgcc ]; then \ $(CC_FOR_TARGET) -print-prog-name=ld ; \ else \ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(LD); \ else \ t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \ fi; \ fi` DLLTOOL_FOR_TARGET = ` \ if [ -f $$r/binutils/dlltool ] ; then \ echo $$r/binutils/dlltool ; \ else \ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(DLLTOOL); \ else \ t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \ fi; \ fi` WINDRES_FOR_TARGET = ` \ if [ -f $$r/binutils/windres ] ; then \ echo $$r/binutils/windres ; \ else \ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(WINDRES); \ else \ t='$(program_transform_name)'; echo windres | sed -e 's/x/x/' $$t ; \ fi; \ fi` AR_FOR_TARGET = ` \ if [ -f $$r/binutils/ar ] ; then \ echo $$r/binutils/ar ; \ else \ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(AR); \ else \ t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \ fi; \ fi` RANLIB_FOR_TARGET = ` \ if [ -f $$r/binutils/ranlib ] ; then \ echo $$r/binutils/ranlib ; \ else \ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ if [ x'$(RANLIB)' != x ]; then \ echo $(RANLIB); \ else \ echo ranlib; \ fi; \ else \ t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \ fi; \ fi` NM_FOR_TARGET = ` \ if [ -f $$r/binutils/nm-new ] ; then \ echo $$r/binutils/nm-new ; \ elif [ -f $$r/gcc/xgcc ]; then \ $(CC_FOR_TARGET) -print-prog-name=nm ; \ else \ if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ echo $(NM); \ else \ t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \ fi; \ fi` # The first rule in the file had better be this one. Don't put any above it. # This lives here to allow makefile fragments to contain dependencies. all: all.normal .PHONY: all # These can be overridden by config/mt-*. # The _TARGET_ is because they're specified in mt-foo. # The _HOST_ is because they're programs that run on the host. EXTRA_TARGET_HOST_ALL_MODULES = EXTRA_TARGET_HOST_INSTALL_MODULES = EXTRA_TARGET_HOST_CHECK_MODULES = #### host and target specific makefile fragments come in here. ### # Flags to pass down to all sub-makes. # Please keep these in alphabetical order. BASE_FLAGS_TO_PASS = \ "AR_FLAGS=$(AR_FLAGS)" \ "AR_FOR_TARGET=$(AR_FOR_TARGET)" \ "AS_FOR_TARGET=$(AS_FOR_TARGET)" \ "BISON=$(BISON)" \ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ "CFLAGS=$(CFLAGS)" \ "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ "GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \ "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \ "CXXFLAGS=$(CXXFLAGS)" \ "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \ "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \ "INSTALL=$(INSTALL)" \ "INSTALL_DATA=$(INSTALL_DATA)" \ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \ "LDFLAGS=$(LDFLAGS)" \ "LEX=$(LEX)" \ "LD_FOR_TARGET=$(LD_FOR_TARGET)" \ "LIBCFLAGS=$(LIBCFLAGS)" \ "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ "LIBCXXFLAGS=$(LIBCXXFLAGS)" \ "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \ "M4=$(M4)" \ "MAKE=$(MAKE)" \ "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \ "RPATH_ENVVAR=$(RPATH_ENVVAR)" \ "SHELL=$(SHELL)" \ "EXPECT=$(EXPECT)" \ "RUNTEST=$(RUNTEST)" \ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ "TARGET_SUBDIR=$(TARGET_SUBDIR)" \ "WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \ "YACC=$(YACC)" \ "bindir=$(bindir)" \ "datadir=$(datadir)" \ "exec_prefix=$(exec_prefix)" \ "includedir=$(includedir)" \ "infodir=$(infodir)" \ "libdir=$(libdir)" \ "libexecdir=$(libexecdir)" \ "lispdir=$(lispdir)" \ "libstdcxx_incdir=$(libstdcxx_incdir)" \ "libsubdir=$(libsubdir)" \ "localstatedir=$(localstatedir)" \ "mandir=$(mandir)" \ "oldincludedir=$(oldincludedir)" \ "prefix=$(prefix)" \ "sbindir=$(sbindir)" \ "sharedstatedir=$(sharedstatedir)" \ "sysconfdir=$(sysconfdir)" \ "tooldir=$(tooldir)" \ "build_tooldir=$(build_tooldir)" \ "gxx_include_dir=$(gxx_include_dir)" \ "gcc_version=$(gcc_version)" \ "gcc_version_trigger=$(gcc_version_trigger)" \ "target_alias=$(target_alias)" # For any flags above that may contain shell code that varies from one # target library to another. When doing recursive invocations of the # top-level Makefile, we don't want the outer make to evaluate them, # so we pass these variables down unchanged. They must not contain # single nor double quotes. RECURSE_FLAGS = \ CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)' # Flags to pass down to most sub-makes, in which we're building with # the host environment. # If any variables are added here, they must be added to do-*, below. EXTRA_HOST_FLAGS = \ 'AR=$(AR)' \ 'AS=$(AS)' \ 'CC=$(CC)' \ 'CXX=$(CXX)' \ 'DLLTOOL=$(DLLTOOL)' \ 'LD=$(LD)' \ 'NM=$(NM)' \ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \ 'WINDRES=$(WINDRES)' FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) # Flags that are concerned with the location of the X11 include files # and library files # # NOTE: until the top-level is getting the values via autoconf, it only # causes problems to have this top-level Makefile overriding the autoconf-set # values in child directories. Only variables that don't conflict with # autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now. # X11_FLAGS_TO_PASS = \ 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \ 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)' # Flags to pass down to makes which are built with the target environment. # The double $ decreases the length of the command line; the variables # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them. # If any variables are added here, they must be added to do-*, below. EXTRA_TARGET_FLAGS = \ 'AR=$$(AR_FOR_TARGET)' \ 'AS=$$(AS_FOR_TARGET)' \ 'CC=$$(CC_FOR_TARGET)' \ 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \ 'CXX=$$(CXX_FOR_TARGET)' \ 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \ 'LD=$$(LD_FOR_TARGET)' \ 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \ 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \ 'NM=$$(NM_FOR_TARGET)' \ 'RANLIB=$$(RANLIB_FOR_TARGET)' \ 'WINDRES=$$(WINDRES_FOR_TARGET)' TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS) # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it # unfortunately needs the native compiler and the target ar and # ranlib. # If any variables are added here, they must be added to do-*, below. # The HOST_* variables are a special case, which are used for the gcc # cross-building scheme. EXTRA_GCC_FLAGS = \ 'AR=$(AR)' \ 'AS=$(AS)' \ 'CC=$(CC)' \ 'CXX=$(CXX)' \ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \ 'HOST_CC=$(CC_FOR_BUILD)' \ 'BUILD_PREFIX=$(BUILD_PREFIX)' \ 'BUILD_PREFIX_1=$(BUILD_PREFIX_1)' \ 'NM=$(NM)' \ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \ 'WINDRES=$$(WINDRES_FOR_TARGET)' \ "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \ "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \ "`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'LIBGCC2_CFLAGS=$(LIBGCC2_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'ENQUIRE=$(ENQUIRE)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \ "`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS) # This is a list of the targets for all of the modules which are compiled # using the build machine's native compiler. Configure edits the second # macro for build!=host builds. ALL_BUILD_MODULES_LIST = \ all-build-libiberty ALL_BUILD_MODULES = # This is a list of the configure targets for all of the modules which # are compiled using the native tools. CONFIGURE_BUILD_MODULES = \ configure-build-libiberty # This is a list of the targets for all of the modules which are compiled # using $(FLAGS_TO_PASS). ALL_MODULES = [+ FOR host_modules +]\ all-[+module+] [+ ENDFOR host_modules +]\ $(EXTRA_TARGET_HOST_ALL_MODULES) # This is a list of the check targets for all of the modules which are # compiled using $(FLAGS_TO_PASS). # # The list is in two parts. The first lists those tools which # are tested as part of the host's native tool-chain, and not # tested in a cross configuration. NATIVE_CHECK_MODULES = \ check-bison \ check-byacc \ check-fastjar \ check-flex \ check-zip CROSS_CHECK_MODULES = [+ FOR host_modules +][+ IF no_check +][+ ELIF no_check_cross +][+ ELSE x +]\ check-[+module+] [+ ENDIF no_check +][+ ENDFOR host_modules +]\ $(EXTRA_TARGET_HOST_CHECK_MODULES) CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES) # This is a list of the install targets for all of the modules which are # compiled using $(FLAGS_TO_PASS). # We put install-opcodes before install-binutils because the installed # binutils might be on PATH, and they might need the shared opcodes # library. # We put install-tcl before install-itcl because itcl wants to run a # program on installation which uses the Tcl libraries. INSTALL_MODULES = [+ FOR host_modules+][+ IF no_install +][+ ELSE no_install +]\ install-[+module+] [+ ENDIF no_install +][+ ENDFOR host_modules +]\ $(EXTRA_TARGET_HOST_INSTALL_MODULES) # This is a list of the targets for all of the modules which are compiled # using $(X11_FLAGS_TO_PASS). ALL_X11_MODULES = \ all-gdb \ all-expect \ all-guile \ all-tclX \ all-tk \ all-tix # This is a list of the check targets for all of the modules which are # compiled using $(X11_FLAGS_TO_PASS). CHECK_X11_MODULES = \ check-gdb \ check-guile \ check-expect \ check-tclX \ check-tk \ check-tix # This is a list of the install targets for all the modules which are # compiled using $(X11_FLAGS_TO_PASS). INSTALL_X11_MODULES = \ install-gdb \ install-guile \ install-expect \ install-tclX \ install-tk \ install-tix # This is a list of the targets for all of the modules which are compiled # using $(TARGET_FLAGS_TO_PASS). ALL_TARGET_MODULES = \ all-target-libstdc++-v3 \ all-target-newlib \ all-target-libf2c \ all-target-libobjc \ all-target-libtermcap \ all-target-winsup \ all-target-libgloss \ all-target-libiberty \ all-target-gperf \ all-target-examples \ all-target-libffi \ all-target-libjava \ all-target-zlib \ all-target-boehm-gc \ all-target-qthreads # This is a list of the configure targets for all of the modules which # are compiled using the target tools. CONFIGURE_TARGET_MODULES = \ configure-target-libstdc++-v3 \ configure-target-newlib \ configure-target-libf2c \ configure-target-libobjc \ configure-target-libtermcap \ configure-target-winsup \ configure-target-libgloss \ configure-target-libiberty \ configure-target-gperf \ configure-target-examples \ configure-target-libffi \ configure-target-libjava \ configure-target-zlib \ configure-target-boehm-gc \ configure-target-qthreads # This is a list of the check targets for all of the modules which are # compiled using $(TARGET_FLAGS_TO_PASS). CHECK_TARGET_MODULES = \ check-target-libstdc++-v3 \ check-target-newlib \ check-target-libf2c \ check-target-libobjc \ check-target-winsup \ check-target-libiberty \ check-target-libffi \ check-target-libjava \ check-target-zlib \ check-target-boehm-gc \ check-target-qthreads \ check-target-gperf # This is a list of the install targets for all of the modules which are # compiled using $(TARGET_FLAGS_TO_PASS). INSTALL_TARGET_MODULES = \ install-target-libstdc++-v3 \ install-target-newlib \ install-target-libf2c \ install-target-libobjc \ install-target-libtermcap \ install-target-winsup \ install-target-libgloss \ install-target-libiberty \ install-target-libjava \ install-target-zlib \ install-target-boehm-gc \ install-target-qthreads \ install-target-gperf # This is a list of the targets for which we can do a clean-{target}. CLEAN_MODULES = [+ FOR host_modules +][+ IF no_clean +][+ ELSE no_clean +]\ clean-[+module+] [+ ENDIF no_clean +][+ ENDFOR host_modules +] # All of the target modules that can be cleaned CLEAN_TARGET_MODULES = \ clean-target-libstdc++-v3 \ clean-target-newlib \ clean-target-libf2c \ clean-target-libobjc \ clean-target-winsup \ clean-target-libgloss \ clean-target-libiberty \ clean-target-gperf \ clean-target-examples \ clean-target-libffi \ clean-target-libjava \ clean-target-zlib \ clean-target-boehm-gc \ clean-target-qthreads # All of the x11 modules that can be cleaned CLEAN_X11_MODULES = \ clean-gdb \ clean-expect \ clean-guile \ clean-tclX \ clean-tk \ clean-tix # The target built for a native build. .PHONY: all.normal all.normal: \ $(ALL_BUILD_MODULES) \ $(ALL_MODULES) \ $(ALL_X11_MODULES) \ $(ALL_TARGET_MODULES) \ all-gcc # Do a target for all the subdirectories. A ``make do-X'' will do a # ``make X'' in all subdirectories (because, in general, there is a # dependency (below) of X upon do-X, a ``make X'' will also do this, # but it may do additional work as well). # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once, # because it is so large that it can easily overflow the command line # length limit on some systems. DO_X = \ do-clean \ do-distclean \ do-dvi \ do-info \ do-install-info \ do-installcheck \ do-mostlyclean \ do-maintainer-clean \ do-TAGS .PHONY: $(DO_X) $(DO_X): @target=`echo $@ | sed -e 's/^do-//'`; \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ for i in $(SUBDIRS) -dummy-; do \ if [ -f ./$$i/Makefile ]; then \ case $$i in \ gcc) \ for flag in $(EXTRA_GCC_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ ;; \ *) \ for flag in $(EXTRA_HOST_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ ;; \ esac ; \ if (cd ./$$i; \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ $${target}); \ then true; else exit 1; fi; \ else true; fi; \ done @target=`echo $@ | sed -e 's/^do-//'`; \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ for i in $(TARGET_CONFIGDIRS) -dummy-; do \ if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ for flag in $(EXTRA_TARGET_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ done; \ if (cd $(TARGET_SUBDIR)/$$i; \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ $${target}); \ then true; else exit 1; fi; \ else true; fi; \ done # Here are the targets which correspond to the do-X targets. .PHONY: info installcheck dvi install-info .PHONY: clean distclean mostlyclean maintainer-clean realclean .PHONY: local-clean local-distclean local-maintainer-clean info: do-info installcheck: do-installcheck dvi: do-dvi # Make sure makeinfo is built before we do a `make info'. do-info: all-texinfo install-info: do-install-info dir.info s=`cd $(srcdir); ${PWD}`; export s; \ if [ -f dir.info ] ; then \ $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \ else true ; fi local-clean: -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E *.log local-distclean: -rm -f Makefile config.status config.cache mh-frag mt-frag -if [ "$(TARGET_SUBDIR)" != "." ]; then \ rm -rf $(TARGET_SUBDIR); \ else true; fi -rm -f texinfo/po/Makefile texinfo/po/Makefile.in texinfo/info/Makefile -rm -f texinfo/doc/Makefile texinfo/po/POTFILES -rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null -rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null local-maintainer-clean: @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." clean: do-clean local-clean mostlyclean: do-mostlyclean local-clean distclean: do-distclean local-clean local-distclean maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean maintainer-clean: local-distclean realclean: maintainer-clean # This rule is used to clean specific modules. .PHONY: $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc $(CLEAN_MODULES) $(CLEAN_X11_MODULES) clean-gcc: @dir=`echo $@ | sed -e 's/clean-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) clean); \ else \ true; \ fi .PHONY: $(CLEAN_TARGET_MODULES) $(CLEAN_TARGET_MODULES): @dir=`echo $@ | sed -e 's/clean-target-//'`; \ rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) clean); \ else \ true; \ fi clean-target: $(CLEAN_TARGET_MODULES) clean-target-libgcc clean-target-libgcc: test ! -d gcc/libgcc || \ (cd gcc/libgcc && find . -type d -print) | \ while read d; do rm -f gcc/$$d/libgcc.a || : ; done -rm -rf gcc/libgcc # Check target. .PHONY: check do-check check: $(MAKE) do-check NOTPARALLEL=parallel-ok do-check: $(CHECK_MODULES) \ $(CHECK_TARGET_MODULES) \ $(CHECK_X11_MODULES) \ check-gcc # Automated reporting of test results. warning.log: build.log $(srcdir)/contrib/warn_summary build.log > $@ mail-report.log: if test x'$(BOOT_CFLAGS)' != x''; then \ BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \ fi; \ $(srcdir)/contrib/test_summary -t >$@ chmod +x $@ echo If you really want to send e-mail, run ./$@ now mail-report-with-warnings.log: warning.log if test x'$(BOOT_CFLAGS)' != x''; then \ BOOT_CFLAGS='$(BOOT_CFLAGS)'; export BOOT_CFLAGS; \ fi; \ $(srcdir)/contrib/test_summary -t -i warning.log >$@ chmod +x $@ echo If you really want to send e-mail, run ./$@ now # Installation targets. .PHONY: install install-cross uninstall source-vault binary-vault vault-install install: $(INSTALL_TARGET) install-cross: $(INSTALL_TARGET_CROSS) uninstall: @echo "the uninstall target is not supported in this tree" source-vault: $(MAKE) -f ./release/Build-A-Release \ host=$(host_alias) source-vault binary-vault: $(MAKE) -f ./release/Build-A-Release \ host=$(host_alias) target=$(target_alias) vault-install: @if [ -f ./release/vault-install ] ; then \ ./release/vault-install $(host_alias) $(target_alias) ; \ else \ true ; \ fi .PHONY: install.all install.all: install-no-fixedincludes @if [ -f ./gcc/Makefile ] ; then \ r=`${PWD}` ; export r ; \ $(SET_LIB_PATH) \ (cd ./gcc; \ $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \ else \ true ; \ fi # install-no-fixedincludes is used because Cygnus can not distribute # the fixed header files. .PHONY: install-no-fixedincludes install-no-fixedincludes: \ installdirs \ $(INSTALL_MODULES) \ $(INSTALL_TARGET_MODULES) \ $(INSTALL_X11_MODULES) \ gcc-no-fixedincludes # Install the gcc headers files, but not the fixed include files, # which Cygnus is not allowed to distribute. This rule is very # dependent on the workings of the gcc Makefile.in. .PHONY: gcc-no-fixedincludes gcc-no-fixedincludes: @if [ -f ./gcc/Makefile ]; then \ rm -rf gcc/tmp-include; \ mv gcc/include gcc/tmp-include 2>/dev/null; \ mkdir gcc/include; \ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \ touch gcc/stmp-fixinc gcc/include/fixed; \ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}` ; export s; \ $(SET_LIB_PATH) \ (cd ./gcc; \ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ rm -rf gcc/include; \ mv gcc/tmp-include gcc/include 2>/dev/null; \ else true; fi # This rule is used to build the modules which are built with the # build machine's native compiler. .PHONY: $(ALL_BUILD_MODULES) $(ALL_BUILD_MODULES): dir=`echo $@ | sed -e 's/all-build-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ (cd $(BUILD_SUBDIR)/$${dir} && $(MAKE) all); \ else \ true; \ fi # This rule is used to configure the modules which are built with the # native tools. .PHONY: $(CONFIGURE_BUILD_MODULES) $(CONFIGURE_BUILD_MODULES): @dir=`echo $@ | sed -e 's/configure-build-//'`; \ if [ ! -d $(BUILD_SUBDIR) ]; then \ true; \ elif [ -f $(BUILD_SUBDIR)/$${dir}/Makefile ] ; then \ true; \ elif echo " $(BUILD_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ if [ -d $(srcdir)/$${dir} ]; then \ [ -d $(BUILD_SUBDIR)/$${dir} ] || mkdir $(BUILD_SUBDIR)/$${dir};\ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ AR="$(AR_FOR_BUILD)"; export AR; \ AS="$(AS_FOR_BUILD)"; export AS; \ CC="$(CC_FOR_BUILD)"; export CC; \ CFLAGS="$(CFLAGS_FOR_BUILD)"; export CFLAGS; \ CXX="$(CXX_FOR_BUILD)"; export CXX; \ CXXFLAGS="$(CXXFLAGS_FOR_BUILD)"; export CXXFLAGS; \ GCJ="$(GCJ_FOR_BUILD)"; export GCJ; \ DLLTOOL="$(DLLTOOL_FOR_BUILD)"; export DLLTOOL; \ LD="$(LD_FOR_BUILD)"; export LD; \ LDFLAGS="$(LDFLAGS_FOR_BUILD)"; export LDFLAGS; \ NM="$(NM_FOR_BUILD)"; export NM; \ RANLIB="$(RANLIB_FOR_BUILD)"; export RANLIB; \ WINDRES="$(WINDRES_FOR_BUILD)"; export WINDRES; \ echo Configuring in $(BUILD_SUBDIR)/$${dir}; \ cd "$(BUILD_SUBDIR)/$${dir}" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ *) \ case "$(BUILD_SUBDIR)" in \ .) topdir="../$(srcdir)" ;; \ *) topdir="../../$(srcdir)" ;; \ esac ;; \ esac; \ if [ "$(srcdir)" = "." ] ; then \ if [ "$(BUILD_SUBDIR)" != "." ] ; then \ if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \ if [ -f Makefile ]; then \ if $(MAKE) distclean; then \ true; \ else \ exit 1; \ fi; \ else \ true; \ fi; \ else \ exit 1; \ fi; \ else \ true; \ fi; \ srcdiroption="--srcdir=."; \ libsrcdir="."; \ else \ srcdiroption="--srcdir=$${topdir}/$${dir}"; \ libsrcdir="$$s/$${dir}"; \ fi; \ if [ -f $${libsrcdir}/configure ] ; then \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ $(BUILD_CONFIGARGS) $${srcdiroption} \ --with-build-subdir="$(BUILD_SUBDIR)"; \ else \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ $(BUILD_CONFIGARGS) $${srcdiroption} \ --with-build-subdir="$(BUILD_SUBDIR)"; \ fi || exit 1; \ if [ -f skip-this-dir ] ; then \ sh skip-this-dir; \ rm -f skip-this-dir; \ cd ..; rmdir $${dir} || true; \ else \ true; \ fi; \ else \ true; \ fi; \ else \ true; \ fi # This rule is used to build the modules which use FLAGS_TO_PASS. To # build a target all-X means to cd to X and make all. # # all-gui, and all-libproc are handled specially because # they are still experimental, and if they fail to build, that # shouldn't stop "make all". .PHONY: $(ALL_MODULES) all-gui all-libproc $(ALL_MODULES) all-gui all-libproc: @dir=`echo $@ | sed -e 's/all-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \ else \ true; \ fi # These rules are used to check the modules which use FLAGS_TO_PASS. # To build a target check-X means to cd to X and make check. Some # modules are only tested in a native toolchain. .PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES) $(NATIVE_CHECK_MODULES): @if [ '$(host_canonical)' = '$(target_canonical)' ] ; then \ dir=`echo $@ | sed -e 's/check-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \ else \ true; \ fi; \ fi $(CROSS_CHECK_MODULES): @dir=`echo $@ | sed -e 's/check-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \ else \ true; \ fi # This rule is used to install the modules which use FLAGS_TO_PASS. # To build a target install-X means to cd to X and make install. .PHONY: $(INSTALL_MODULES) $(INSTALL_MODULES): installdirs @dir=`echo $@ | sed -e 's/install-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \ else \ true; \ fi # This rule is used to configure the modules which are built with the # target tools. .PHONY: $(CONFIGURE_TARGET_MODULES) $(CONFIGURE_TARGET_MODULES): @dir=`echo $@ | sed -e 's/configure-target-//'`; \ if [ -d $(TARGET_SUBDIR)/$${dir} ]; then \ r=`${PWD}`; export r; \ $(CC_FOR_TARGET) --print-multi-lib > $(TARGET_SUBDIR)/$${dir}/tmpmulti.out 2> /dev/null; \ if [ -s $(TARGET_SUBDIR)/$${dir}/tmpmulti.out ]; then \ if [ -f $(TARGET_SUBDIR)/$${dir}/multilib.out ]; then \ if cmp $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/tmpmulti.out > /dev/null; then \ rm -f $(TARGET_SUBDIR)/$${dir}/tmpmulti.out; \ else \ echo "Multilibs changed for $${dir}, reconfiguring"; \ rm -f $(TARGET_SUBDIR)/$${dir}/multilib.out $(TARGET_SUBDIR)/$${dir}/Makefile; \ mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \ fi; \ else \ mv $(TARGET_SUBDIR)/$${dir}/tmpmulti.out $(TARGET_SUBDIR)/$${dir}/multilib.out; \ fi; \ fi; \ fi; exit 0 # break command into two pieces @dir=`echo $@ | sed -e 's/configure-target-//'`; \ if [ ! -d $(TARGET_SUBDIR) ]; then \ true; \ elif [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ true; \ elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ if [ -d $(srcdir)/$${dir} ]; then \ [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ AR="$(AR_FOR_TARGET)"; export AR; \ AS="$(AS_FOR_TARGET)"; export AS; \ CC="$(CC_FOR_TARGET)"; export CC; \ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CXX="$(CXX_FOR_TARGET)"; export CXX; \ CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ LD="$(LD_FOR_TARGET)"; export LD; \ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ NM="$(NM_FOR_TARGET)"; export NM; \ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \ echo Configuring in $(TARGET_SUBDIR)/$${dir}; \ cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \ case $(srcdir) in \ /* | [A-Za-z]:[\\/]*) \ topdir=$(srcdir) ;; \ *) \ case "$(TARGET_SUBDIR)" in \ .) topdir="../$(srcdir)" ;; \ *) topdir="../../$(srcdir)" ;; \ esac ;; \ esac; \ if [ "$(srcdir)" = "." ] ; then \ if [ "$(TARGET_SUBDIR)" != "." ] ; then \ if $(SHELL) $$s/symlink-tree $${topdir}/$${dir} "no-such-file" ; then \ if [ -f Makefile ]; then \ if $(MAKE) distclean; then \ true; \ else \ exit 1; \ fi; \ else \ true; \ fi; \ else \ exit 1; \ fi; \ else \ true; \ fi; \ srcdiroption="--srcdir=."; \ libsrcdir="."; \ else \ srcdiroption="--srcdir=$${topdir}/$${dir}"; \ libsrcdir="$$s/$${dir}"; \ fi; \ if [ -f $${libsrcdir}/configure ] ; then \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $${libsrcdir}/configure \ $(TARGET_CONFIGARGS) $${srcdiroption} \ --with-target-subdir="$(TARGET_SUBDIR)"; \ else \ rm -f no-such-file skip-this-dir; \ CONFIG_SITE=no-such-file $(SHELL) $$s/configure \ $(TARGET_CONFIGARGS) $${srcdiroption} \ --with-target-subdir="$(TARGET_SUBDIR)"; \ fi || exit 1; \ if [ -f skip-this-dir ] ; then \ sh skip-this-dir; \ rm -f skip-this-dir; \ cd ..; rmdir $${dir} || true; \ else \ true; \ fi; \ else \ true; \ fi; \ else \ true; \ fi # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS. # To build a target all-X means to cd to X and make all. .PHONY: $(ALL_TARGET_MODULES) $(ALL_TARGET_MODULES): @dir=`echo $@ | sed -e 's/all-target-//'`; \ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $(TARGET_SUBDIR)/$${dir}; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ else \ true; \ fi # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS. # To build a target install-X means to cd to X and make install. .PHONY: $(CHECK_TARGET_MODULES) $(CHECK_TARGET_MODULES): @dir=`echo $@ | sed -e 's/check-target-//'`; \ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $(TARGET_SUBDIR)/$${dir}; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ else \ true; \ fi # This rule is used to install the modules which use # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X # and make install. .PHONY: $(INSTALL_TARGET_MODULES) $(INSTALL_TARGET_MODULES): installdirs @dir=`echo $@ | sed -e 's/install-target-//'`; \ if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $(TARGET_SUBDIR)/$${dir}; \ $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ else \ true; \ fi # This rule is used to build the modules which use X11_FLAGS_TO_PASS. # To build a target all-X means to cd to X and make all. .PHONY: $(ALL_X11_MODULES) $(ALL_X11_MODULES): @dir=`echo $@ | sed -e 's/all-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $${dir}; \ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \ else \ true; \ fi # This rule is used to check the modules which use X11_FLAGS_TO_PASS. # To build a target check-X means to cd to X and make all. .PHONY: $(CHECK_X11_MODULES) $(CHECK_X11_MODULES): @dir=`echo $@ | sed -e 's/check-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $${dir}; \ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \ else \ true; \ fi # This rule is used to install the modules which use X11_FLAGS_TO_PASS. # To build a target install-X means to cd to X and make install. .PHONY: $(INSTALL_X11_MODULES) $(INSTALL_X11_MODULES): installdirs @dir=`echo $@ | sed -e 's/install-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $${dir}; \ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \ else \ true; \ fi # gcc is the only module which uses GCC_FLAGS_TO_PASS. .PHONY: all-gcc all-gcc: @if [ -f ./gcc/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \ else \ true; \ fi # Building GCC uses some tools for rebuilding "source" files # like texinfo, bison/byacc, etc. So we must depend on those. # # While building GCC, it may be necessary to run various target # programs like the assembler, linker, etc. So we depend on # those too. # # In theory, on an SMP all those dependencies can be resolved # in parallel. # .PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap @r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ echo "Bootstrapping the compiler"; \ cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $@ @r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ case "$@" in \ *bootstrap4-lean ) \ msg="Comparing stage3 and stage4 of the compiler"; \ compare=compare3-lean ;; \ *bootstrap4 ) msg="Comparing stage3 and stage4 of the compiler"; \ compare=compare3 ;; \ *-lean ) msg="Comparing stage2 and stage3 of the compiler"; \ compare=compare-lean ;; \ * ) msg="Comparing stage2 and stage3 of the compiler"; \ compare=compare ;; \ esac; \ $(SET_LIB_PATH) \ echo "$$msg"; \ cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) $$compare @r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}` ; export s; \ $(SET_LIB_PATH) \ echo "Building runtime libraries"; \ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all .PHONY: cross cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld @r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ echo "Building the C and C++ compiler"; \ cd gcc && $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++" @r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}` ; export s; \ $(SET_LIB_PATH) \ echo "Building runtime libraries"; \ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \ LANGUAGES="c c++" all .PHONY: check-gcc check-gcc: @if [ -f ./gcc/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \ else \ true; \ fi .PHONY: check-c++ check-c++: @if [ -f ./gcc/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \ $(MAKE) check-target-libstdc++-v3; \ else \ true; \ fi .PHONY: install-gcc install-gcc: @if [ -f ./gcc/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ else \ true; \ fi .PHONY: install-gcc-cross install-gcc-cross: @if [ -f ./gcc/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) LANGUAGES="c c++" install); \ else \ true; \ fi # EXPERIMENTAL STUFF # This rule is used to install the modules which use FLAGS_TO_PASS. # To build a target install-X means to cd to X and make install. .PHONY: install-dosrel install-dosrel: installdirs info @dir=`echo $@ | sed -e 's/install-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ r=`${PWD}`; export r; \ s=`cd $(srcdir); ${PWD}`; export s; \ $(SET_LIB_PATH) \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \ else \ true; \ fi install-dosrel-fake: ALL_GCC = all-gcc ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3 # This is a list of inter-dependencies among modules. all-ash: all-autoconf: all-m4 all-texinfo all-automake: all-m4 all-texinfo all-bash: all-bfd: all-libiberty all-intl all-binutils: all-libiberty all-opcodes all-bfd all-flex all-bison all-byacc all-intl all-bison: all-texinfo configure-target-boehm-gc: $(ALL_GCC_C) configure-target-qthreads all-target-boehm-gc: configure-target-boehm-gc all-byacc: all-bzip2: all-db: all-dejagnu: all-tcl all-expect all-tk all-diff: all-libiberty all-etc: configure-target-examples: $(ALL_GCC_C) all-target-examples: configure-target-examples all-expect: all-tcl all-tk all-fileutils: all-libiberty all-findutils: all-find: all-flex: all-libiberty all-bison all-byacc all-gas: all-libiberty all-opcodes all-bfd all-intl all-gawk: all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK) all-gettext: all-gnuserv: configure-target-gperf: $(ALL_GCC_CXX) all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3 all-gprof: all-libiberty all-bfd all-opcodes all-intl all-grep: all-libiberty all-gui: all-gdb all-libproc all-guile: all-gzip: all-libiberty all-hello: all-libiberty all-indent: all-intl: all-itcl: all-tcl all-tk all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl configure-target-libgloss: $(ALL_GCC) all-target-libgloss: configure-target-libgloss configure-target-newlib all-libgui: all-tcl all-tk all-itcl all-libiberty: all-build-libiberty: configure-build-libiberty configure-target-libffi: $(ALL_GCC_C) all-target-libffi: configure-target-libffi configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi configure-target-libstdc++-v3: $(ALL_GCC_C) all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty all-libtool: configure-target-libf2c: $(ALL_GCC_C) all-target-libf2c: configure-target-libf2c all-target-libiberty configure-target-libobjc: $(ALL_GCC_C) all-target-libobjc: configure-target-libobjc all-target-libiberty all-m4: all-libiberty all-texinfo all-make: all-libiberty all-mmalloc: configure-target-newlib: $(ALL_GCC) all-target-newlib: configure-target-newlib configure-target-libtermcap: $(ALL_GCC_C) all-target-libtermcap: configure-target-libtermcap all-opcodes: all-bfd all-libiberty all-patch: all-libiberty all-perl: all-prms: all-libiberty configure-target-qthreads: $(ALL_GCC_C) all-target-qthreads: configure-target-qthreads all-rcs: all-readline: all-recode: all-libiberty all-sed: all-libiberty all-send-pr: all-prms all-shellutils: all-sid: all-tcl all-tk all-sim: all-libiberty all-bfd all-opcodes all-readline all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui all-tar: all-libiberty all-tcl: all-tclX: all-tcl all-tk all-tk: all-tcl all-texinfo: all-libiberty all-textutils: all-time: all-tix: all-tcl all-tk all-wdiff: configure-target-winsup: $(ALL_GCC_C) all-target-winsup: all-target-libiberty all-target-libtermcap configure-target-winsup all-uudecode: all-libiberty all-zip: all-zlib: configure-target-zlib: $(ALL_GCC_C) all-target-zlib: configure-target-zlib all-fastjar: all-zlib all-libiberty configure-target-fastjar: configure-target-zlib all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty configure-target-libiberty: $(ALL_GCC_C) all-target-libiberty: configure-target-libiberty all-target: $(ALL_TARGET_MODULES) install-target: $(INSTALL_TARGET_MODULES) install-gdb: install-tcl install-tk install-itcl install-tix install-libgui install-sid: install-tcl install-tk ### other supporting targets MAKEDIRS= \ $(DESTDIR)$(prefix) \ $(DESTDIR)$(exec_prefix) .PHONY: installdirs installdirs: mkinstalldirs $(SHELL) $(srcdir)/mkinstalldirs $(MAKEDIRS) dir.info: do-install-info if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \ $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \ mv -f dir.info.new dir.info ; \ else true ; \ fi dist: @echo "Building a full distribution of this tree isn't done" @echo "via 'make dist'. Check out the etc/ subdirectory" etags tags: TAGS # Right now this just builds TAGS in each subdirectory. emacs19 has the # ability to use several tags files at once, so there is probably no need # to combine them into one big TAGS file (like CVS 1.3 does). We could # (if we felt like it) have this Makefile write a piece of elisp which # the user could load to tell emacs19 where all the TAGS files we just # built are. TAGS: do-TAGS # with the gnu make, this is done automatically. Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(gcc_version_trigger) $(SHELL) ./config.status # # Support for building net releases # Files in devo used in any net release. # ChangeLog omitted because it may refer to files which are not in this # distribution (perhaps it would be better to include it anyway). DEVO_SUPPORT= README Makefile.in configure configure.in \ config.guess config.if config.sub config move-if-change \ mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \ COPYING COPYING.LIB install-sh config-ml.in symlink-tree \ mkinstalldirs ltconfig ltmain.sh missing ylwrap \ libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh # Files in devo/etc used in any net release. # ChangeLog omitted because it may refer to files which are not in this # distribution (perhaps it would be better to include it anyway). ETC_SUPPORT= Makefile.in configure configure.in standards.texi \ make-stds.texi standards.info* configure.texi configure.info* \ configbuild.* configdev.* # When you use `make setup-dirs' or `make taz' you should always redefine # this macro. SUPPORT_FILES = list-of-support-files-for-tool-in-question # NOTE: No double quotes in the below. It is used within shell script # as VER="$(VER)" VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \ sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \ elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \ sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \ elif test -f $(TOOL)/version.in; then \ head -1 $(TOOL)/version.in; \ elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \ sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \ else \ echo VERSION; \ fi` PACKAGE = $(TOOL) .PHONY: taz taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex $(MAKE) -f Makefile.in do-proto-toplev \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" $(MAKE) -f Makefile.in do-md5sum \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" $(MAKE) -f Makefile.in do-tar \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" $(MAKE) -f Makefile.in do-bz2 \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" .PHONY: gdb-tar gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex $(MAKE) -f Makefile.in do-proto-toplev \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" $(MAKE) -f Makefile.in do-md5sum \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" $(MAKE) -f Makefile.in do-djunpack \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" $(MAKE) -f Makefile.in do-tar \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" .PHONY: gdb-taz gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex $(MAKE) -f Makefile.in gdb-tar \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" $(MAKE) -f Makefile.in do-bz2 \ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(SUPPORT_FILES)" .PHONY: do-proto-toplev do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex echo "==> Making $(PACKAGE)-$(VER)/" # Take out texinfo from a few places. sed -e '/^all\.normal: /s/\all-texinfo //' \ -e '/^ install-texinfo /d' \ tmp mv -f tmp Makefile.in # ./configure sun4 [ -z "$(CONFIGURE_TARGET_MODULES)" ] \ || $(MAKE) $(CONFIGURE_TARGET_MODULES) \ ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \ CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)" # Make links, and run "make diststuff" or "make info" when needed. rm -rf proto-toplev ; mkdir proto-toplev set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \ for d in $$dirs ; do \ if [ -d $$d ]; then \ if [ ! -f $$d/Makefile ] ; then true ; \ elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \ (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \ elif grep '^info:' $$d/Makefile >/dev/null ; then \ (cd $$d ; $(MAKE) info ) || exit 1 ; \ fi ; \ if [ -d $$d/proto-$$d.dir ]; then \ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \ else \ ln -s ../$$d proto-toplev/$$d ; \ fi ; \ else ln -s ../$$d proto-toplev/$$d ; fi ; \ done cd etc && $(MAKE) info $(MAKE) distclean # mkdir proto-toplev/etc (cd proto-toplev/etc; \ for i in $(ETC_SUPPORT); do \ ln -s ../../etc/$$i . ; \ done) # # Take out texinfo from configurable dirs rm proto-toplev/configure.in sed -e '/^host_tools=/s/texinfo //' \ proto-toplev/configure.in # mkdir proto-toplev/texinfo ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/ if test -r texinfo/util/tex3patch ; then \ mkdir proto-toplev/texinfo/util && \ ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \ else true; fi chmod -R og=u . || chmod og=u `find . -print` # # Create .gmo files from .po files. for f in `find . -name '*.po' -type f -print`; do \ msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \ done # -rm -f $(PACKAGE)-$(VER) ln -s proto-toplev $(PACKAGE)-$(VER) .PHONY: do-tar do-tar: echo "==> Making $(PACKAGE)-$(VER).tar" -rm -f $(PACKAGE)-$(VER).tar find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \ | tar cTfh - $(PACKAGE)-$(VER).tar .PHONY: do-bz2 do-bz2: echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2" -rm -f $(PACKAGE)-$(VER).tar.bz2 $(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar .PHONY: do-md5sum do-md5sum: echo "==> Adding md5 checksum to top-level directory" cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \ | xargs $(MD5PROG) > ../md5.sum mv md5.sum proto-toplev .PHONY: do-djunpack do-djunpack: echo "==> Adding updated djunpack.bat to top-level directory" echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/' sed < djunpack.bat > djunpack.new \ -e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/' mv djunpack.new djunpack.bat -rm -f proto-toplev/djunpack.bat ln -s ../djunpack.bat proto-toplev/djunpack.bat TEXINFO_SUPPORT= texinfo/texinfo.tex DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT) .PHONY: gas.tar.bz2 GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas $(MAKE) -f Makefile.in taz TOOL=gas \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" # The FSF "binutils" release includes gprof and ld. .PHONY: binutils.tar.bz2 BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils $(MAKE) -f Makefile.in taz TOOL=binutils \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" .PHONY: gas+binutils.tar.bz2 GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas $(MAKE) -f Makefile.in taz TOOL=gas \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" GNATS_SUPPORT_DIRS=include libiberty send-pr gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats $(MAKE) -f Makefile.in taz TOOL=gnats \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)" .PHONY: gdb.tar.bz2 GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb $(MAKE) -f Makefile.in gdb-taz TOOL=gdb \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(GDB_SUPPORT_DIRS)" .PHONY: gdb.tar gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(GDB_SUPPORT_DIRS)" DEJAGNU_SUPPORT_DIRS= tcl expect libiberty .PHONY: dejagnu.tar.bz2 dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu $(MAKE) -f Makefile.in taz TOOL=dejagnu \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)" .PHONY: gdb+dejagnu.tar.bz2 GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)" .PHONY: gdb+dejagnu.tar gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)" .PHONY: insight.tar.bz2 INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)" .PHONY: insight.tar insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)" .PHONY: insight+dejagnu.tar.bz2 INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)" .PHONY: insight+dejagnu.tar insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)" .PHONY: newlib.tar.bz2 NEWLIB_SUPPORT_DIRS=libgloss # taz configures for the sun4 target which won't configure newlib. # We need newlib configured so that the .info files are made. # Unfortunately, it is not enough to just configure newlib separately: # taz will build the .info files but since SUBDIRS won't contain newlib, # distclean won't be run (leaving Makefile, config.status, and the tmp files # used in building the .info files, eg: *.def, *.ref). # The problem isn't solvable however without a lot of extra work because # target libraries are built in subdir $(target_alias) which gets nuked during # the make distclean. For now punt on the issue of shipping newlib info files # with newlib net releases and wait for a day when some native target (sun4?) # supports newlib (if only minimally). newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib $(MAKE) -f Makefile.in taz TOOL=newlib \ MD5PROG="$(MD5PROG)" \ SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \ DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib .NOEXPORT: MAKEOVERRIDES= # end of Makefile.in --gBBFr7Ir9EOA20Yy Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="Makefile.def" Content-length: 2491 #! /usr/bin/autogen AutoGen definitions Makefile.tpl; host_modules= { module= ash; }; host_modules= { module= autoconf; }; host_modules= { module= automake; }; host_modules= { module= bash; }; host_modules= { module= bfd; }; // Put install-opcodes before install-binutils: should be Makefile dependency. host_modules= { module= opcodes; }; host_modules= { module= binutils; }; host_modules= { module= bison; no_check_cross= true; }; host_modules= { module= byacc; no_check_cross= true; }; host_modules= { module= bzip2; }; host_modules= { module= db; }; host_modules= { module= dejagnu; }; host_modules= { module= diff; }; host_modules= { module= dosutils; no_check= true; }; host_modules= { module= etc; }; host_modules= { module= fastjar; no_check_cross= true; }; host_modules= { module= fileutils; }; host_modules= { module= findutils; }; host_modules= { module= find; }; host_modules= { module= flex; no_check_cross= true; }; host_modules= { module= gas; }; host_modules= { module= gawk; }; host_modules= { module= gettext; }; host_modules= { module= gnuserv; }; host_modules= { module= gprof; }; host_modules= { module= grep; }; host_modules= { module= gzip; }; host_modules= { module= hello; }; host_modules= { module= indent; }; host_modules= { module= intl; }; // Put install-tcl before install-itcl: should be Makefile dependency. host_modules= { module= tcl; }; host_modules= { module= itcl; }; host_modules= { module= ld; }; host_modules= { module= libgui; }; host_modules= { module= libiberty; }; host_modules= { module= libtool; }; host_modules= { module= m4; }; host_modules= { module= make; }; host_modules= { module= mmalloc; no_check=true; }; host_modules= { module= patch; }; host_modules= { module= perl; }; host_modules= { module= prms; }; host_modules= { module= rcs; }; host_modules= { module= readline; }; host_modules= { module= release; no_install= true; no_check= true; }; host_modules= { module= recode; }; host_modules= { module= sed; }; host_modules= { module= send-pr; }; host_modules= { module= shellutils; }; host_modules= { module= sid; }; host_modules= { module= sim; }; host_modules= { module= snavigator; }; host_modules= { module= tar; }; host_modules= { module= texinfo; no_install= true; }; host_modules= { module= textutils; }; host_modules= { module= time; }; host_modules= { module= uudecode; }; host_modules= { module= wdiff; }; host_modules= { module= zip; no_check_cross=true; }; host_modules= { module= zlib; no_install=true; no_check=true; }; --gBBFr7Ir9EOA20Yy Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="min.diff" Content-length: 2379 --- Makefile.in.old 2002-09-21 21:06:07.000000000 -0400 +++ Makefile.in 2002-09-21 21:40:05.000000000 -0400 @@ -1,3 +1,5 @@ + +# Makefile.in is generated from Makefile.tpl by 'autogen Makefile.def'. # # Makefile for directory with subdirs to build. # Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, @@ -529,6 +531,7 @@ all-automake \ all-bash \ all-bfd \ + all-opcodes \ all-binutils \ all-bison \ all-byacc \ @@ -553,6 +556,7 @@ all-hello \ all-indent \ all-intl \ + all-tcl \ all-itcl \ all-ld \ all-libgui \ @@ -561,7 +565,6 @@ all-m4 \ all-make \ all-mmalloc \ - all-opcodes \ all-patch \ all-perl \ all-prms \ @@ -576,7 +579,6 @@ all-sim \ all-snavigator \ all-tar \ - all-tcl \ all-texinfo \ all-textutils \ all-time \ @@ -605,6 +607,7 @@ check-automake \ check-bash \ check-bfd \ + check-opcodes \ check-binutils \ check-bzip2 \ check-db \ @@ -624,6 +627,7 @@ check-hello \ check-indent \ check-intl \ + check-tcl \ check-itcl \ check-ld \ check-libgui \ @@ -631,8 +635,7 @@ check-libtool \ check-m4 \ check-make \ - check-mmcheckoc \ - check-opcodes \ + check-mmalloc \ check-patch \ check-perl \ check-prms \ @@ -642,11 +645,10 @@ check-sed \ check-send-pr \ check-shellutils \ - check-snavigator \ check-sid \ check-sim \ + check-snavigator \ check-tar \ - check-tcl \ check-texinfo \ check-textutils \ check-time \ @@ -669,11 +671,11 @@ install-automake \ install-bash \ install-bfd \ - install-bzip2 \ install-opcodes \ install-binutils \ install-bison \ install-byacc \ + install-bzip2 \ install-db \ install-dejagnu \ install-diff \ @@ -831,6 +833,7 @@ clean-automake \ clean-bash \ clean-bfd \ + clean-opcodes \ clean-binutils \ clean-bison \ clean-byacc \ @@ -855,6 +858,7 @@ clean-hello \ clean-indent \ clean-intl \ + clean-tcl \ clean-itcl \ clean-ld \ clean-libgui \ @@ -863,7 +867,6 @@ clean-m4 \ clean-make \ clean-mmalloc \ - clean-opcodes \ clean-patch \ clean-perl \ clean-prms \ @@ -878,14 +881,13 @@ clean-sim \ clean-snavigator \ clean-tar \ - clean-tcl \ clean-texinfo \ clean-textutils \ clean-time \ clean-uudecode \ clean-wdiff \ clean-zip \ - clean-zlib + clean-zlib # All of the target modules that can be cleaned CLEAN_TARGET_MODULES = \ --gBBFr7Ir9EOA20Yy--