From: Gary Benson <gbenson@redhat.com>
To: gdb-patches@sourceware.org
Subject: [PATCH 4/7] Introduce linux_pid_to_exec_file
Date: Wed, 01 Apr 2015 11:27:00 -0000 [thread overview]
Message-ID: <1427887341-31819-5-git-send-email-gbenson@redhat.com> (raw)
In-Reply-To: <1427887341-31819-1-git-send-email-gbenson@redhat.com>
This commit introduces a new function, linux_pid_to_exec_file, that
shared Linux code can use to discover the filename of the executable
that was run to create a process on the system.
gdb/ChangeLog:
* nat/linux-nat.h (linux_pid_to_exec_file): New declaration.
* nat/linux-nat.c: New file.
* Makefile.in (common-linux-nat.o): New rule.
* config/aarch64/linux.mh (NATDEPFILES): Add common-linux-nat.o.
* config/alpha/alpha-linux.mh (NATDEPFILES): Likewise.
* config/arm/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux.mh (NATDEPFILES): Likewise.
* config/i386/linux64.mh (NATDEPFILES): Likewise.
* config/ia64/linux.mh (NATDEPFILES): Likewise.
* config/m32r/linux.mh (NATDEPFILES): Likewise.
* config/m68k/linux.mh (NATDEPFILES): Likewise.
* config/mips/linux.mh (NATDEPFILES): Likewise.
* config/pa/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/linux.mh (NATDEPFILES): Likewise.
* config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise.
* config/powerpc/spu-linux.mh (NATDEPFILES): Likewise.
* config/s390/linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux.mh (NATDEPFILES): Likewise.
* config/sparc/linux64.mh (NATDEPFILES): Likewise.
* config/tilegx/linux.mh (NATDEPFILES): Likewise.
* config/xtensa/linux.mh (NATDEPFILES): Likewise.
* linux-nat.c (linux_child_pid_to_exec_file): Factored out
to new function linux_pid_to_exec_file in nat/linux-nat.c.
gdb/gdbserver/ChangeLog:
* Makefile.in (common-linux-nat.o): New rule.
* configure.srv (srv_linux_obj): Add common-linux-nat.o.
---
gdb/ChangeLog | 26 ++++++++++++++++++++++++++
gdb/Makefile.in | 4 ++++
gdb/config/aarch64/linux.mh | 2 +-
gdb/config/alpha/alpha-linux.mh | 2 +-
gdb/config/arm/linux.mh | 2 +-
gdb/config/i386/linux.mh | 2 +-
gdb/config/i386/linux64.mh | 2 +-
gdb/config/ia64/linux.mh | 2 +-
gdb/config/m32r/linux.mh | 2 +-
gdb/config/m68k/linux.mh | 2 +-
gdb/config/mips/linux.mh | 2 +-
gdb/config/pa/linux.mh | 2 +-
gdb/config/powerpc/linux.mh | 2 +-
gdb/config/powerpc/ppc64-linux.mh | 2 +-
gdb/config/powerpc/spu-linux.mh | 3 ++-
gdb/config/s390/linux.mh | 2 +-
gdb/config/sparc/linux.mh | 2 +-
gdb/config/sparc/linux64.mh | 2 +-
gdb/config/tilegx/linux.mh | 2 +-
gdb/config/xtensa/linux.mh | 2 +-
gdb/gdbserver/ChangeLog | 5 +++++
gdb/gdbserver/Makefile.in | 3 +++
gdb/gdbserver/configure.srv | 2 +-
gdb/linux-nat.c | 10 +---------
gdb/nat/linux-nat.c | 37 +++++++++++++++++++++++++++++++++++++
gdb/nat/linux-nat.h | 9 +++++++++
26 files changed, 105 insertions(+), 28 deletions(-)
create mode 100644 gdb/nat/linux-nat.c
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index 907997b..6920358 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -2310,6 +2310,10 @@ x86-linux-dregs.o: ${srcdir}/nat/x86-linux-dregs.c
$(COMPILE) $(srcdir)/nat/x86-linux-dregs.c
$(POSTCOMPILE)
+common-linux-nat.o: ${srcdir}/nat/linux-nat.c
+ $(COMPILE) $(srcdir)/nat/linux-nat.c
+ $(POSTCOMPILE)
+
#
# gdb/tui/ dependencies
#
diff --git a/gdb/config/aarch64/linux.mh b/gdb/config/aarch64/linux.mh
index 7f96e4d..d22150a 100644
--- a/gdb/config/aarch64/linux.mh
+++ b/gdb/config/aarch64/linux.mh
@@ -22,7 +22,7 @@ NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o fork-child.o aarch64-linux-nat.o \
proc-service.o linux-thread-db.o linux-nat.o linux-fork.o \
linux-procfs.o linux-ptrace.o linux-osdata.o linux-waitpid.o \
- linux-personality.o
+ linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
LOADLIBES= -ldl $(RDYNAMIC)
diff --git a/gdb/config/alpha/alpha-linux.mh b/gdb/config/alpha/alpha-linux.mh
index 2ea02a1..81b1199 100644
--- a/gdb/config/alpha/alpha-linux.mh
+++ b/gdb/config/alpha/alpha-linux.mh
@@ -3,7 +3,7 @@ NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o alpha-linux-nat.o \
fork-child.o proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
- linux-waitpid.o linux-personality.o
+ linux-waitpid.o linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
# The dynamically loaded libthread_db needs access to symbols in the
diff --git a/gdb/config/arm/linux.mh b/gdb/config/arm/linux.mh
index 549bf42..e92188a 100644
--- a/gdb/config/arm/linux.mh
+++ b/gdb/config/arm/linux.mh
@@ -4,7 +4,7 @@ NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o fork-child.o arm-linux-nat.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
- linux-waitpid.o linux-personality.o
+ linux-waitpid.o linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
LOADLIBES= -ldl $(RDYNAMIC)
diff --git a/gdb/config/i386/linux.mh b/gdb/config/i386/linux.mh
index 9be2c5f..a32d940 100644
--- a/gdb/config/i386/linux.mh
+++ b/gdb/config/i386/linux.mh
@@ -6,7 +6,7 @@ NATDEPFILES= inf-ptrace.o fork-child.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
linux-btrace.o linux-waitpid.o linux-personality.o x86-linux.o \
- x86-linux-dregs.o
+ x86-linux-dregs.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
# The dynamically loaded libthread_db needs access to symbols in the
diff --git a/gdb/config/i386/linux64.mh b/gdb/config/i386/linux64.mh
index 224a2a9..7666814 100644
--- a/gdb/config/i386/linux64.mh
+++ b/gdb/config/i386/linux64.mh
@@ -6,7 +6,7 @@ NATDEPFILES= inf-ptrace.o fork-child.o \
proc-service.o linux-thread-db.o linux-fork.o \
linux-procfs.o linux-ptrace.o linux-btrace.o \
linux-waitpid.o linux-personality.o x86-linux.o \
- x86-linux-dregs.o
+ x86-linux-dregs.o common-linux-nat.o
NAT_FILE= config/nm-linux.h
NAT_CDEPS = $(srcdir)/proc-service.list
diff --git a/gdb/config/ia64/linux.mh b/gdb/config/ia64/linux.mh
index 9dce22b..8d9dc12 100644
--- a/gdb/config/ia64/linux.mh
+++ b/gdb/config/ia64/linux.mh
@@ -6,7 +6,7 @@ NATDEPFILES= inf-ptrace.o fork-child.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o \
linux-personality.o \
- linux-procfs.o linux-ptrace.o linux-waitpid.o
+ linux-procfs.o linux-ptrace.o linux-waitpid.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
LOADLIBES = -ldl $(RDYNAMIC)
diff --git a/gdb/config/m32r/linux.mh b/gdb/config/m32r/linux.mh
index 6b810e6..d83df66 100644
--- a/gdb/config/m32r/linux.mh
+++ b/gdb/config/m32r/linux.mh
@@ -4,7 +4,7 @@ NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o fork-child.o \
m32r-linux-nat.o proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
- linux-waitpid.o linux-personality.o
+ linux-waitpid.o linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
LOADLIBES= -ldl $(RDYNAMIC)
diff --git a/gdb/config/m68k/linux.mh b/gdb/config/m68k/linux.mh
index f3b3baa..1bc1d78 100644
--- a/gdb/config/m68k/linux.mh
+++ b/gdb/config/m68k/linux.mh
@@ -6,7 +6,7 @@ NATDEPFILES= inf-ptrace.o fork-child.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
linux-personality.o \
- linux-waitpid.o
+ linux-waitpid.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
# The dynamically loaded libthread_db needs access to symbols in the
diff --git a/gdb/config/mips/linux.mh b/gdb/config/mips/linux.mh
index d6a802f..577e410 100644
--- a/gdb/config/mips/linux.mh
+++ b/gdb/config/mips/linux.mh
@@ -5,7 +5,7 @@ NATDEPFILES= inf-ptrace.o fork-child.o mips-linux-nat.o \
linux-nat.o linux-osdata.o linux-fork.o \
linux-procfs.o linux-ptrace.o linux-waitpid.o \
linux-personality.o \
- mips-linux-watch.o
+ mips-linux-watch.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
LOADLIBES = -ldl $(RDYNAMIC)
diff --git a/gdb/config/pa/linux.mh b/gdb/config/pa/linux.mh
index 9539b64..97230b8 100644
--- a/gdb/config/pa/linux.mh
+++ b/gdb/config/pa/linux.mh
@@ -4,7 +4,7 @@ NATDEPFILES= inf-ptrace.o fork-child.o \
hppa-linux-nat.o proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o \
linux-procfs.o linux-ptrace.o linux-waitpid.o \
- linux-personality.o
+ linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
LOADLIBES = -ldl $(RDYNAMIC)
diff --git a/gdb/config/powerpc/linux.mh b/gdb/config/powerpc/linux.mh
index 76e62c0..f8f8a6e 100644
--- a/gdb/config/powerpc/linux.mh
+++ b/gdb/config/powerpc/linux.mh
@@ -6,7 +6,7 @@ NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o fork-child.o \
ppc-linux-nat.o proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
- linux-waitpid.o linux-personality.o
+ linux-waitpid.o linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
LOADLIBES = -ldl $(RDYNAMIC)
diff --git a/gdb/config/powerpc/ppc64-linux.mh b/gdb/config/powerpc/ppc64-linux.mh
index 7eb6507..f9194a0 100644
--- a/gdb/config/powerpc/ppc64-linux.mh
+++ b/gdb/config/powerpc/ppc64-linux.mh
@@ -6,7 +6,7 @@ NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o fork-child.o \
ppc-linux-nat.o proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
- linux-waitpid.o ppc-linux.o linux-personality.o
+ linux-waitpid.o ppc-linux.o linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
# The PowerPC has severe limitations on TOC size, and uses them even
diff --git a/gdb/config/powerpc/spu-linux.mh b/gdb/config/powerpc/spu-linux.mh
index d44aeeb..345ac8d 100644
--- a/gdb/config/powerpc/spu-linux.mh
+++ b/gdb/config/powerpc/spu-linux.mh
@@ -4,5 +4,6 @@
# PPU side of the Cell BE and debugging the SPU side.
NATDEPFILES = spu-linux-nat.o fork-child.o inf-ptrace.o \
- linux-procfs.o linux-ptrace.o linux-waitpid.o linux-personality.o
+ linux-procfs.o linux-ptrace.o linux-waitpid.o \
+ linux-personality.o common-linux-nat.o
diff --git a/gdb/config/s390/linux.mh b/gdb/config/s390/linux.mh
index e1ad899..9938e73 100644
--- a/gdb/config/s390/linux.mh
+++ b/gdb/config/s390/linux.mh
@@ -4,6 +4,6 @@ NATDEPFILES= inf-ptrace.o fork-child.o s390-linux-nat.o \
linux-thread-db.o proc-service.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
linux-personality.o \
- linux-waitpid.o
+ linux-waitpid.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
LOADLIBES = -ldl $(RDYNAMIC)
diff --git a/gdb/config/sparc/linux.mh b/gdb/config/sparc/linux.mh
index bd7fc86..30cc477 100644
--- a/gdb/config/sparc/linux.mh
+++ b/gdb/config/sparc/linux.mh
@@ -5,7 +5,7 @@ NATDEPFILES= sparc-nat.o sparc-linux-nat.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o \
linux-procfs.o linux-ptrace.o linux-waitpid.o \
- linux-personality.o
+ linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
# The dynamically loaded libthread_db needs access to symbols in the
diff --git a/gdb/config/sparc/linux64.mh b/gdb/config/sparc/linux64.mh
index 86f984f..73fa282 100644
--- a/gdb/config/sparc/linux64.mh
+++ b/gdb/config/sparc/linux64.mh
@@ -5,7 +5,7 @@ NATDEPFILES= sparc-nat.o sparc64-nat.o sparc64-linux-nat.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o \
linux-procfs.o linux-ptrace.o linux-waitpid.o \
- linux-personality.o
+ linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
# The dynamically loaded libthread_db needs access to symbols in the
diff --git a/gdb/config/tilegx/linux.mh b/gdb/config/tilegx/linux.mh
index b5edcd4..cd5528d 100644
--- a/gdb/config/tilegx/linux.mh
+++ b/gdb/config/tilegx/linux.mh
@@ -6,7 +6,7 @@ NATDEPFILES= inf-ptrace.o fork-child.o \
proc-service.o linux-thread-db.o \
linux-nat.o linux-osdata.o linux-fork.o \
linux-procfs.o linux-ptrace.o linux-waitpid.o \
- linux-personality.o
+ linux-personality.o common-linux-nat.o
# The dynamically loaded libthread_db needs access to symbols in the
# gdb executable.
diff --git a/gdb/config/xtensa/linux.mh b/gdb/config/xtensa/linux.mh
index b4e59b3..9737442 100644
--- a/gdb/config/xtensa/linux.mh
+++ b/gdb/config/xtensa/linux.mh
@@ -5,7 +5,7 @@ NAT_FILE= config/nm-linux.h
NATDEPFILES= inf-ptrace.o fork-child.o xtensa-linux-nat.o \
linux-thread-db.o proc-service.o \
linux-nat.o linux-osdata.o linux-fork.o linux-procfs.o linux-ptrace.o \
- linux-waitpid.o linux-personality.o
+ linux-waitpid.o linux-personality.o common-linux-nat.o
NAT_CDEPS = $(srcdir)/proc-service.list
LOADLIBES = -ldl $(RDYNAMIC)
diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in
index 9d698c6..e30636c 100644
--- a/gdb/gdbserver/Makefile.in
+++ b/gdb/gdbserver/Makefile.in
@@ -615,6 +615,9 @@ x86-linux.o: ../nat/x86-linux.c
x86-linux-dregs.o: ../nat/x86-linux-dregs.c
$(COMPILE) $<
$(POSTCOMPILE)
+common-linux-nat.o: ../nat/linux-nat.c
+ $(COMPILE) $<
+ $(POSTCOMPILE)
aarch64.c : $(srcdir)/../regformats/aarch64.dat $(regdat_sh)
$(SHELL) $(regdat_sh) $(srcdir)/../regformats/aarch64.dat aarch64.c
diff --git a/gdb/gdbserver/configure.srv b/gdb/gdbserver/configure.srv
index 81dd235..11c9bc0 100644
--- a/gdb/gdbserver/configure.srv
+++ b/gdb/gdbserver/configure.srv
@@ -42,7 +42,7 @@ srv_amd64_linux_xmlfiles="i386/amd64-linux.xml i386/amd64-avx-linux.xml i386/amd
# Linux object files. This is so we don't have to repeat
# these files over and over again.
-srv_linux_obj="linux-low.o linux-osdata.o linux-procfs.o linux-ptrace.o linux-waitpid.o linux-personality.o"
+srv_linux_obj="linux-low.o linux-osdata.o linux-procfs.o linux-ptrace.o linux-waitpid.o linux-personality.o common-linux-nat.o"
# Input is taken from the "${target}" variable.
diff --git a/gdb/linux-nat.c b/gdb/linux-nat.c
index 0376299..de4dc1a 100644
--- a/gdb/linux-nat.c
+++ b/gdb/linux-nat.c
@@ -4086,15 +4086,7 @@ linux_nat_thread_name (struct target_ops *self, struct thread_info *thr)
static char *
linux_child_pid_to_exec_file (struct target_ops *self, int pid)
{
- static char buf[PATH_MAX];
- char name[PATH_MAX];
-
- xsnprintf (name, PATH_MAX, "/proc/%d/exe", pid);
- memset (buf, 0, PATH_MAX);
- if (readlink (name, buf, PATH_MAX - 1) <= 0)
- strcpy (buf, name);
-
- return buf;
+ return linux_pid_to_exec_file (pid);
}
/* Implement the to_xfer_partial interface for memory reads using the /proc
diff --git a/gdb/nat/linux-nat.c b/gdb/nat/linux-nat.c
new file mode 100644
index 0000000..b9deae3
--- /dev/null
+++ b/gdb/nat/linux-nat.c
@@ -0,0 +1,37 @@
+/* Native-dependent code for GNU/Linux
+
+ Copyright (C) 2000-2015 Free Software Foundation, Inc.
+
+ This file is part of GDB.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include "common-defs.h"
+#include "nat/linux-nat.h"
+
+/* See nat/linux-nat.h. */
+
+char *
+linux_pid_to_exec_file (int pid)
+{
+ static char buf[PATH_MAX];
+ char name[PATH_MAX];
+
+ xsnprintf (name, PATH_MAX, "/proc/%d/exe", pid);
+ memset (buf, 0, PATH_MAX);
+ if (readlink (name, buf, PATH_MAX - 1) <= 0)
+ strcpy (buf, name);
+
+ return buf;
+}
diff --git a/gdb/nat/linux-nat.h b/gdb/nat/linux-nat.h
index 7cdaf40..81c2edc 100644
--- a/gdb/nat/linux-nat.h
+++ b/gdb/nat/linux-nat.h
@@ -78,4 +78,13 @@ extern enum target_stop_reason lwp_stop_reason (struct lwp_info *lwp);
extern void linux_stop_lwp (struct lwp_info *lwp);
+/* Return the pathname of the executable file that was run to create
+ the process PID. If the executable file cannot be determined, NULL
+ is returned. Otherwise, a pointer to a character string containing
+ the pathname is returned. This string should be copied into a
+ buffer by the client if the string will not be immediately used, or
+ if it must persist. */
+
+extern char *linux_pid_to_exec_file (int pid);
+
#endif /* LINUX_NAT_H */
--
1.7.1
next prev parent reply other threads:[~2015-04-01 11:27 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-01 11:22 [PATCH 0/7] Do not require "file" commands for remote targets Gary Benson
2015-04-01 11:22 ` [PATCH 3/7] Use gdb_sysroot for main executable on attach Gary Benson
2015-04-01 14:53 ` Eli Zaretskii
2015-04-15 12:45 ` Gary Benson
2015-04-15 10:43 ` Pedro Alves
2015-04-01 11:22 ` [PATCH 2/7] Introduce exec_file_find Gary Benson
2015-04-01 11:22 ` [PATCH 1/7] Introduce exec_file_locate_attach Gary Benson
2015-04-01 11:27 ` Gary Benson [this message]
2015-04-06 16:41 ` [PATCH 4/7] Introduce linux_pid_to_exec_file Doug Evans
2015-04-07 9:07 ` Gary Benson
2015-04-08 3:15 ` Doug Evans
2015-04-08 8:06 ` Gary Benson
2015-04-15 9:37 ` Pedro Alves
2015-04-15 13:14 ` [PATCH 4/7 v2] Introduce linux_proc_pid_to_exec_file Gary Benson
2015-04-15 16:01 ` Pedro Alves
2015-04-01 11:29 ` [PATCH 5/7] Implement remote_pid_to_exec_file using qXfer:exec-file:read Gary Benson
2015-04-01 14:55 ` Eli Zaretskii
2015-04-06 17:00 ` Doug Evans
2015-04-06 17:21 ` Eli Zaretskii
2015-04-06 21:57 ` Doug Evans
2015-04-07 6:09 ` Eli Zaretskii
2015-04-07 9:08 ` Gary Benson
2015-04-08 1:57 ` Doug Evans
2015-04-08 6:00 ` Eli Zaretskii
2015-04-01 11:30 ` [PATCH 6/7] Implement qXfer:exec-file:read in gdbserver Gary Benson
2015-04-06 17:11 ` Doug Evans
2015-04-07 9:19 ` Gary Benson
2015-04-17 23:43 ` Possible regression on gdb.base/attach.exp when using native-extended-gdbserver (was: Re: [PATCH 6/7] Implement qXfer:exec-file:read in gdbserver) Sergio Durigan Junior
2015-04-20 9:13 ` Gary Benson
2015-04-20 10:41 ` [OB PATCH] Fix three test failures with extended remote targets Gary Benson
2015-04-01 11:39 ` [PATCH 7/7] Access executable from remote system when first inferior appears Gary Benson
2015-04-15 10:24 ` Pedro Alves
2015-04-15 13:56 ` Gary Benson
2015-04-15 14:06 ` Gary Benson
2015-04-15 16:15 ` Pedro Alves
2015-04-15 16:09 ` Pedro Alves
2015-04-16 8:23 ` Gary Benson
2015-04-15 16:13 ` Pedro Alves
2015-04-16 9:30 ` Gary Benson
2015-04-16 9:53 ` Pedro Alves
2015-04-16 11:47 ` Gary Benson
2015-04-16 15:06 ` Eli Zaretskii
2015-04-16 15:23 ` Pedro Alves
2015-04-16 15:05 ` Eli Zaretskii
2015-04-16 19:34 ` Gary Benson
2015-04-15 16:21 ` Eli Zaretskii
2015-04-15 10:47 ` [PATCH 0/7] Do not require "file" commands for remote targets Pedro Alves
2015-04-15 12:02 ` Gary Benson
2015-04-15 12:16 ` Pedro Alves
2015-04-15 14:16 ` Gary Benson
2015-04-15 16:20 ` Pedro Alves
2015-04-17 9:01 ` Gary Benson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427887341-31819-5-git-send-email-gbenson@redhat.com \
--to=gbenson@redhat.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox