From: Andreas Arnez <arnez@linux.vnet.ibm.com>
To: gdb-patches@sourceware.org
Subject: [PATCH v3 3/3] S390: Fix gdbserver support for TDB
Date: Tue, 09 Dec 2014 13:59:00 -0000 [thread overview]
Message-ID: <1418133563-16378-4-git-send-email-arnez@linux.vnet.ibm.com> (raw)
In-Reply-To: <1418133563-16378-1-git-send-email-arnez@linux.vnet.ibm.com>
This makes gdbserver actually provide values for the TDB registers
when the inferior was stopped in a transaction. The changes in
linux-low.c are needed for treating an unavailable TDB correctly and
without warnings.
The test case 's390-tdbregs.exp' passes with this patch and fails
without.
gdb/gdbserver/ChangeLog:
* linux-low.c (regsets_fetch_inferior_registers): Suppress the
warning upon ENODATA from ptrace.
(regsets_store_inferior_registers): Skip regsets without a
fill_function.
* linux-s390-low.c (s390_fill_last_break): Remove.
(s390_store_tdb): New.
(s390_regsets): Set fill_function to NULL for NT_S390_LAST_BREAK.
Add regset for NT_S390_TDB.
(s390_arch_setup): Use regset's size instead of fill_function for
loop end condition.
---
gdb/gdbserver/linux-low.c | 5 +++--
gdb/gdbserver/linux-s390-low.c | 31 +++++++++++++++++++++----------
2 files changed, 24 insertions(+), 12 deletions(-)
diff --git a/gdb/gdbserver/linux-low.c b/gdb/gdbserver/linux-low.c
index c1b53ff..6ace4b0 100644
--- a/gdb/gdbserver/linux-low.c
+++ b/gdb/gdbserver/linux-low.c
@@ -4256,7 +4256,7 @@ regsets_fetch_inferior_registers (struct regsets_info *regsets_info,
this process mode. */
disable_regset (regsets_info, regset);
}
- else
+ else if (errno != ENODATA)
{
char s[256];
sprintf (s, "ptrace(regsets_fetch_inferior_registers) PID=%d",
@@ -4293,7 +4293,8 @@ regsets_store_inferior_registers (struct regsets_info *regsets_info,
void *buf, *data;
int nt_type, res;
- if (regset->size == 0 || regset_disabled (regsets_info, regset))
+ if (regset->size == 0 || regset_disabled (regsets_info, regset)
+ || regset->fill_function == NULL)
continue;
buf = xmalloc (regset->size);
diff --git a/gdb/gdbserver/linux-s390-low.c b/gdb/gdbserver/linux-s390-low.c
index 79fa6c0..40fb61c 100644
--- a/gdb/gdbserver/linux-s390-low.c
+++ b/gdb/gdbserver/linux-s390-low.c
@@ -290,12 +290,6 @@ s390_fill_gregset (struct regcache *regcache, void *buf)
/* Fill and store functions for extended register sets. */
static void
-s390_fill_last_break (struct regcache *regcache, void *buf)
-{
- /* Last break address is read-only. */
-}
-
-static void
s390_store_last_break (struct regcache *regcache, const void *buf)
{
const char *p;
@@ -316,13 +310,30 @@ s390_store_system_call (struct regcache *regcache, const void *buf)
supply_register_by_name (regcache, "system_call", buf);
}
+static void
+s390_store_tdb (struct regcache *regcache, const void *buf)
+{
+ int tdb0 = find_regno (regcache->tdesc, "tdb0");
+ int tr0 = find_regno (regcache->tdesc, "tr0");
+ int i;
+
+ for (i = 0; i < 4; i++)
+ supply_register (regcache, tdb0 + i, (const char *) buf + 8 * i);
+
+ for (i = 0; i < 16; i++)
+ supply_register (regcache, tr0 + i, (const char *) buf + 8 * (16 + i));
+}
+
static struct regset_info s390_regsets[] = {
{ 0, 0, 0, 0, GENERAL_REGS, s390_fill_gregset, NULL },
- /* Last break address is read-only; do not attempt PTRACE_SETREGSET. */
- { PTRACE_GETREGSET, PTRACE_GETREGSET, NT_S390_LAST_BREAK, 0,
- EXTENDED_REGS, s390_fill_last_break, s390_store_last_break },
+ /* Last break address is read-only; no fill function. */
+ { PTRACE_GETREGSET, -1, NT_S390_LAST_BREAK, 0, EXTENDED_REGS,
+ NULL, s390_store_last_break },
{ PTRACE_GETREGSET, PTRACE_SETREGSET, NT_S390_SYSTEM_CALL, 0,
EXTENDED_REGS, s390_fill_system_call, s390_store_system_call },
+ /* TDB is read-only. */
+ { PTRACE_GETREGSET, -1, NT_S390_TDB, 0, EXTENDED_REGS,
+ NULL, s390_store_tdb },
{ 0, 0, 0, -1, -1, NULL, NULL }
};
@@ -485,7 +496,7 @@ s390_arch_setup (void)
#endif
/* Update target_regsets according to available register sets. */
- for (regset = s390_regsets; regset->fill_function != NULL; regset++)
+ for (regset = s390_regsets; regset->size >= 0; regset++)
if (regset->get_request == PTRACE_GETREGSET)
switch (regset->nt_type)
{
--
1.7.9.5
next prev parent reply other threads:[~2014-12-09 13:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-09 13:59 [PATCH v3 0/3] gdbserver: Fix support for S390 TDB Andreas Arnez
2014-12-09 13:59 ` [PATCH v3 2/3] gdbserver: Prevent stale/random values in register cache Andreas Arnez
2014-12-10 19:14 ` Ulrich Weigand
2014-12-11 17:05 ` Andreas Arnez
2014-12-09 13:59 ` [PATCH v3 1/3] gdbserver: Rephrase loops in regsets_fetch/store_inferior_registers Andreas Arnez
2014-12-09 13:59 ` Andreas Arnez [this message]
2014-12-10 19:16 ` [PATCH v3 3/3] S390: Fix gdbserver support for TDB Ulrich Weigand
2014-12-11 17:04 ` Andreas Arnez
2014-12-11 20:16 ` Ulrich Weigand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1418133563-16378-4-git-send-email-arnez@linux.vnet.ibm.com \
--to=arnez@linux.vnet.ibm.com \
--cc=gdb-patches@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox