From: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
To: Mark Kettenis <mark.kettenis@xs4all.nl>
Cc: gdb-patches@sourceware.org
Subject: Re: [RFA] handle android bionic ptrace in gdbserver.
Date: Wed, 28 Mar 2012 00:27:00 -0000 [thread overview]
Message-ID: <1332894408.16415.14.camel@hactar> (raw)
In-Reply-To: <201203271611.q2RGBs2N025666@glazunov.sibelius.xs4all.nl>
Hi Mark,
On Tue, 2012-03-27 at 18:11 +0200, Mark Kettenis wrote:
> > From: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
> > Date: Mon, 26 Mar 2012 19:46:42 -0300
> Sad to see all this compatibility goo just a different prototype.
> This could almost certainly be fixed by just fixing the header.
I completely agree. IMHO in this case the header to be fixed is actually
glibc's, since it declares ptrace in a different way than what is
supported by the kernel.
> Anyway, you should test this on a 64-bit platform. I have a strong
> suspicion things will break there because of plain integers that are
> being cast to void *.
Good catch, that's what happened indeed. I don't know what would be the
correct fix. I changed the types of the variables that are passed to
ptrace from int to long. At least it hurts the eyes less than two casts
in a row.
These arguments are currently passed as int but glibc reads them as void
* (with a va_arg (ap, void *) call). My impression is that on 64 bit
Linux platforms the code currently works either by chance, or by relying
on implementation-specific behavior.
--
[]'s
Thiago Jung Bauermann
Linaro Toolchain Working Group
2012-03-27 Thiago Jung Bauermann <thiago.bauermann@linaro.org>
* linux-low.h (PTRACE_ARG3_TYPE): Move macro from linux-low.c.
(PTRACE_ARG4_TYPE): Likewise.
(PTRACE_XFER_TYPE): Likewise.
* linux-arm-low.c (arm_prepare_to_resume): Cast third argument of
ptrace to PTRACE_ARG3_TYPE.
* linux-low.c (PTRACE_ARG3_TYPE): Move macro to linux-low.h.
(PTRACE_ARG4_TYPE): Likewise.
(PTRACE_XFER_TYPE): Likewise.
(linux_detach_one_lwp): Cast fourth argument of
ptrace to PTRACE_ARG4_TYPE. Change sig to long.
(regsets_fetch_inferior_registers): Cast third argument of
ptrace to PTRACE_ARG3_TYPE. Change nt_type to long.
(regsets_store_inferior_registers): Likewise.
diff --git a/gdb/gdbserver/linux-arm-low.c b/gdb/gdbserver/linux-arm-low.c
index 01208ef..9490d7d 100644
--- a/gdb/gdbserver/linux-arm-low.c
+++ b/gdb/gdbserver/linux-arm-low.c
@@ -709,13 +709,15 @@ arm_prepare_to_resume (struct lwp_info *lwp)
errno = 0;
if (arm_hwbp_control_is_enabled (proc_info->bpts[i].control))
- if (ptrace (PTRACE_SETHBPREGS, pid, ((i << 1) + 1),
- &proc_info->bpts[i].address) < 0)
+ if (ptrace (PTRACE_SETHBPREGS, pid,
+ (PTRACE_ARG3_TYPE) ((i << 1) + 1),
+ &proc_info->bpts[i].address) < 0)
perror_with_name ("Unexpected error setting breakpoint address");
if (arm_hwbp_control_is_initialized (proc_info->bpts[i].control))
- if (ptrace (PTRACE_SETHBPREGS, pid, ((i << 1) + 2),
- &proc_info->bpts[i].control) < 0)
+ if (ptrace (PTRACE_SETHBPREGS, pid,
+ (PTRACE_ARG3_TYPE) ((i << 1) + 2),
+ &proc_info->bpts[i].control) < 0)
perror_with_name ("Unexpected error setting breakpoint");
lwp_info->bpts_changed[i] = 0;
@@ -727,13 +729,15 @@ arm_prepare_to_resume (struct lwp_info *lwp)
errno = 0;
if (arm_hwbp_control_is_enabled (proc_info->wpts[i].control))
- if (ptrace (PTRACE_SETHBPREGS, pid, -((i << 1) + 1),
- &proc_info->wpts[i].address) < 0)
+ if (ptrace (PTRACE_SETHBPREGS, pid,
+ (PTRACE_ARG3_TYPE) -((i << 1) + 1),
+ &proc_info->wpts[i].address) < 0)
perror_with_name ("Unexpected error setting watchpoint address");
if (arm_hwbp_control_is_initialized (proc_info->wpts[i].control))
- if (ptrace (PTRACE_SETHBPREGS, pid, -((i << 1) + 2),
- &proc_info->wpts[i].control) < 0)
+ if (ptrace (PTRACE_SETHBPREGS, pid,
+ (PTRACE_ARG3_TYPE) -((i << 1) + 2),
+ &proc_info->wpts[i].control) < 0)
perror_with_name ("Unexpected error setting watchpoint");
lwp_info->wpts_changed[i] = 0;
diff --git a/gdb/gdbserver/linux-low.c b/gdb/gdbserver/linux-low.c
index 1caff5a..52ae96c 100644
--- a/gdb/gdbserver/linux-low.c
+++ b/gdb/gdbserver/linux-low.c
@@ -239,10 +239,6 @@ struct pending_signals
struct pending_signals *prev;
};
-#define PTRACE_ARG3_TYPE void *
-#define PTRACE_ARG4_TYPE void *
-#define PTRACE_XFER_TYPE long
-
#ifdef HAVE_LINUX_REGSETS
static char *disabled_regsets;
static int num_regsets;
@@ -1122,7 +1118,7 @@ linux_detach_one_lwp (struct inferior_list_entry *entry, void *args)
struct thread_info *thread = (struct thread_info *) entry;
struct lwp_info *lwp = get_thread_lwp (thread);
int pid = * (int *) args;
- int sig;
+ long sig;
if (ptid_get_pid (entry->id) != pid)
return 0;
@@ -1149,7 +1145,7 @@ linux_detach_one_lwp (struct inferior_list_entry *entry, void *args)
/* Finally, let it resume. */
if (the_low_target.prepare_to_resume != NULL)
the_low_target.prepare_to_resume (lwp);
- if (ptrace (PTRACE_DETACH, lwpid_of (lwp), 0, sig) < 0)
+ if (ptrace (PTRACE_DETACH, lwpid_of (lwp), 0, (PTRACE_ARG4_TYPE) sig) < 0)
error (_("Can't detach %s: %s"),
target_pid_to_str (ptid_of (lwp)),
strerror (errno));
@@ -3968,7 +3964,7 @@ regsets_fetch_inferior_registers (struct regcache *regcache)
while (regset->size >= 0)
{
void *buf, *data;
- int nt_type, res;
+ long nt_type, res;
if (regset->size == 0 || disabled_regsets[regset - target_regsets])
{
@@ -3989,7 +3985,8 @@ regsets_fetch_inferior_registers (struct regcache *regcache)
data = buf;
#ifndef __sparc__
- res = ptrace (regset->get_request, pid, nt_type, data);
+ res = ptrace (regset->get_request, pid,
+ (PTRACE_ARG3_TYPE) nt_type, data);
#else
res = ptrace (regset->get_request, pid, data, nt_type);
#endif
@@ -4037,7 +4034,7 @@ regsets_store_inferior_registers (struct regcache *regcache)
while (regset->size >= 0)
{
void *buf, *data;
- int nt_type, res;
+ long nt_type, res;
if (regset->size == 0 || disabled_regsets[regset - target_regsets])
{
@@ -4062,7 +4059,8 @@ regsets_store_inferior_registers (struct regcache *regcache)
data = buf;
#ifndef __sparc__
- res = ptrace (regset->get_request, pid, nt_type, data);
+ res = ptrace (regset->get_request, pid,
+ (PTRACE_ARG3_TYPE) nt_type, data);
#else
res = ptrace (regset->get_request, pid, &iov, data);
#endif
@@ -4074,7 +4072,8 @@ regsets_store_inferior_registers (struct regcache *regcache)
/* Only now do we write the register set. */
#ifndef __sparc__
- res = ptrace (regset->set_request, pid, nt_type, data);
+ res = ptrace (regset->set_request, pid,
+ (PTRACE_ARG3_TYPE) nt_type, data);
#else
res = ptrace (regset->set_request, pid, data, nt_type);
#endif
diff --git a/gdb/gdbserver/linux-low.h b/gdb/gdbserver/linux-low.h
index 3aeae70..cb26ebb 100644
--- a/gdb/gdbserver/linux-low.h
+++ b/gdb/gdbserver/linux-low.h
@@ -24,6 +24,10 @@
#include "gdb_proc_service.h"
+#define PTRACE_ARG3_TYPE void *
+#define PTRACE_ARG4_TYPE void *
+#define PTRACE_XFER_TYPE long
+
#ifdef HAVE_LINUX_REGSETS
typedef void (*regset_fill_func) (struct regcache *, void *);
typedef void (*regset_store_func) (struct regcache *, const void *);
next prev parent reply other threads:[~2012-03-28 0:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-26 22:47 Thiago Jung Bauermann
2012-03-27 16:12 ` Mark Kettenis
2012-03-28 0:27 ` Thiago Jung Bauermann [this message]
2012-03-29 16:42 ` Pedro Alves
2012-03-30 20:29 ` Thiago Jung Bauermann
2012-04-23 18:53 ` Thiago Jung Bauermann
2012-04-24 13:14 ` Pedro Alves
2012-04-24 15:08 ` Thiago Jung Bauermann
2012-03-29 17:02 ` sparc gdbserver bug? (Re: [RFA] handle android bionic ptrace in gdbserver.) Pedro Alves
2012-03-29 17:23 ` H.J. Lu
2012-03-29 18:50 ` Pedro Alves
2012-03-29 21:29 ` Pedro Alves
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332894408.16415.14.camel@hactar \
--to=thiago.bauermann@linaro.org \
--cc=gdb-patches@sourceware.org \
--cc=mark.kettenis@xs4all.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox